ReviewsFlat Cutting Wheel

Utoolmart Diamond Grinding Wheel Dressing Tool, 60 Grit - 120 Grit Diamond Dresser, Stone Bench Grinder Dressing Tool, for Truing Grinding and Deburring Wheels, Silver, 1 Pcs

  • ...e】- Just move the diamond surface accross the dressing grinding wheels and the flat diamond surface can grind and debur the wheels to achieve a true flat surface, making the wheels work quicker and easier..
  • 【Application】- This wheel dresser removes debris and impurities from the wheel, revealing a sharp, clean cutting surface. You can use it to re-polish your wheel, restore the wheel to a new state, and prolongs the life of grinding wheels. Perfect for white steel jade, brown steel jade, silicone carbide grinding other ceramic resin bond grinding wheels chlorinated mechanized..
Check Stock

Taytools 465494 Wheel Marking Gauge Depth Gauge with Solid Brass Machined Head Hardened .310 inch Diameter Beam Hardened High Speed Steel Cutting Wheel Overall Length 8 Inches Easy Read SAE and Metric

  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop..
  • The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain..
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use..
  • The wheel cutter is 7/16 inch in diameter. The cuter can be easily resharpened by rubbing the flat surface in any sharpening media. Replacement cutter are also available..
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam is black chrome plated to protect against corrosion and to allow easier reading of the mm and SAE graduations. Graduations allow easy....
Check Stock

Two Hole Pins, 1/2 in - 1 15/16 in, Large Threaded (2 Pack)

  • 32Pcs Rotary tool mini cutting discs sets include 6pcs 22/ 25/ 32/ 35/ 44/ 50/mm woodworking thin cutting wheel +10pcs black mesh 32mm resin cutting wheel +10pcs 22mm emery cutting wheel +30pcs 22mm red polishing wheel + 1pc 1/8" connecting rod + 1pc 1/4 "connecting rod + 4pc 3mm connecting rod.
  • Mini saw blades made of high-hardness steel, hard texture, wear-resistant and heat-resistant, surface-plated emery, fine and uniform particles, rotary tool cutting disc can be used to polish or cut the surface of objects, high cutting efficiency and durability.003cbr/003e.
  • Rotary cut-off wheel kit has 6 assorted cutting discs set for different needs, HSS mini saw blades for wood and plastic / Diamond cutting wheels for stone / Resin cutting wheels for metal..
  • The cut-off wheels set + is suitable for all kinds of metal, wood, drywall, plastic, stone, ceramic, glass, hard alloy, the treasure jade stone processing and more / Ideal for cutting, grooving and trimming.003cbr/003e.
  • Compatibility: Shank cutting disc mandrels fit for most power die grinders or rotary tools & air tools.003cbr/003e.
Check Stock

kengbi Dresser Stone Dresser Bench Grinder Dressing Tool Grinding Wheel，Grinding Wheel Dresser with Flat Diamond Coated Surface for Truing Grinding Deburring Wheels Abrasive Dressing Tools

  • Flat diamond surface helps dress grinding & abrasive deburring wheels to a true flat surface..
  • Makes dressing grinding wheels quick and easy by moving diamond surface across wheel..
  • Clears unwanted debris and impurities from your grinding wheels revealing sharp clean cutting surfaces..
  • This grinding wheel dresser is crafted from high quality diamond and metal which owns high hardness and great durability..
Check Stock

HFS(R) Grinding Wheel Dresser Handheld Diamond Wheel Dressing Surface Metal for Lathe Dressing Tool Clean Grinding Wheel

  • [PREMIUM QUALITY METAL] Constructed with premium quality metal, this handheld wheel dresser comes with ridged handles for easy grip, along with guide bars and mounting. Perfect for resin bonded, chlorinated, mechanized, and silicone carbide grinding wheels..
  • [PRECISION TRUING& SOLID CONSTRUCTION] Precision truing, or squaring up the face of the wheel, can be executed quickly and easily.
  • just move the diamond surface over the wheels. Solid construction means tool is long lasting..
  • [DRESSES YOUR GRINDING WHEELS TO PERFECTION] Diamond Grinding Wheel Dresser (36 grit diamond chips) dresses your grinding wheels to perfection. These handy and hardworking accessories expose clean, flat, sharp cutting-surfaces, by clearing the wheel's surfaces of unwanted impurities and debris..
  • [SEAMLESSLY CLEAN] Seamlessly clears unwanted debris and impurities while moving the diamond surface across the wheel to reveal sharp and clean surfaces - making abrasive deburring and grinding wheel dressing quick and easy..
  • [SIZE AND MATERIAL]: Diamond. 4.53''*1.77''(115*45mm).
Check Stock

ETIGER Wheel Marking Gauge 0.2mm Lightweight Woodworking Wheel Marking Gauge Kit Micro Adjuster Cutter Wood Scribe Tool for Woodwork

  • 1. MAKE ACCURATE MARKINGS: To ensure precise markings, this brass wheel marking gauge features an engraved graduated ruler, which shows both metric....
  • 2. FOR EVERYDAY USE: This marking wheel gauge is built to last a lifetime, thanks to its solid brass body and hardened steel cutter..
  • 3. FINE CUTTING WHEEL ADJUSTMENT: The marking gauge wheel is fitted with a micro-adjustable fence with 2 thumbscrews, which will make it easier for....
  • 4. ANTI-ROLL DESIGN: Keep this wheel marking gauge from rolling off of your work bench. It houses an anti-roll brass fence with 2 flat spots on the....
  • 5. EASY TO SET: The marking tool is fitted with sturdy knobs that ensure easy adjustments. The rod features a V-shaped slot that prevents the fence....
Check Stock

OKDIAMOND Diamond Cutting Wheel 6 x 7/8 Inch for Metal, Cut Off Wheel with 3000+ Cuts on Rebar, Steel, Iron and INOX, for Angle Grinder-6 inch

  • All in 1 Metal Solution - 4.5 diamond blades for grinder for metal diamond plate cutting wheel，Angle grinder cutting wheel ，Our cut off wheel allows dry cutting of many metal type materials likes tubes&structural、sheet metal、stainless steel、solids、rebar、castings、steel plates、non-ferrous..
  • LONG LIFE - Metal cutting blade according to the test results, OKDIAMOND enables to make more than 3000 cuts. Increased lifetime of this cut off wheel is ensured by high-temperature plasma soldering and a new generation of diamond grit in the segment. And our cut wheels have no wear and tear after work , it does not wear down like bonded abrasives.
  • Environmental - When you use our cutting wheel : less sparks, no dust, no smell, no overheating. reducing dust particles for a cleaner work station. It's very comfortable in usage than traditional wheels. It's 100% contaminant-free. The diamond cutting wheel can be used for grinding burred edges that can leave after rough metal cutting..
  • SAFETY- Wheel breakage eliminated when operating at high rotation speed (13200 RPM) because of special construction of the disc ....
Check Stock

Keloo Diamond Grinding Wheel for Glass Edging

  • Professional Quality High Density Diamond Coated Flat Lap Lapping Lapidary Wheel Disc Multiple Grit.
  • Industry Standard Nickle-electroplated diamond disc. Fits all flat lap machines with half-inch arbor.
  • Perfect for all polishing and lapidary purposes, designed to resolve all and any task.
  • Fast cutting heavy duty diamond discs ideal for all types of gemstone grinding, faceting or cabbing.
  • Ideal tool for the commercial cutter or serious hobbyist, professionals or DIY users.
Check Stock

Makita 5 Pack - 4.5\ Cut Off Wheels For 4.5\ Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2\ x .045\ x 7/8-Inch

  • ...High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear.
  • ✅ DESIGNED for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material.
Check Stock

Windspeed 1+5Pcs Inside Pvc Pipe Cutter, Internal Pvc Pipe Cutter for Plumbing Inside Cutter with1/4\ Hex Shank, 5 Inside Pvc Pipe Cutter Replacement Blades (32/32/ 35/44/ 48 mm)

  • ❤【Perfect Combination】: This set includes PVC pipe inside cutter+4 pcs metal cutter blades(32/32/35/44 mm)+1 pcs grinding wheel(38 mm). It has complete accessories, which can help you cut various types and sizes of PVC pipes. It is one of the indispensable tools for home renovation..
  • ❤【Fast Cutting】: This inside pipe cutter blade a deep, dense, and sharp tooth marks, which can help you easily cut PVC pipes, plastic pipes, density boards, and aluminum pipes. At the same time, the cutting planes are smooth and flat after cutting..
  • ❤【easy to use】: After selecting the inside cutter for pvc with the proper size and connecting the electric drill, you can cut the pipe from the inside or the outside. The grinding wheel can also help you grind the plane after cutting. (Cooling liquid or water shall be used for cooling during cutting to prevent the saw blade from overheating).
  • ❤【Well Made】: The handle of the internal plastic pipe cutter is made of heavy carbon steel, with high hardness, and strong wear resistance, and is well made. The inside pipe cutter blade is made of HHS material, which is sturdy and durable, with sharp tooth marks and excellent cutting ability. (To better preserve the saw blade, a layer of protective oil is added....
Check Stock

Walter ZIP+ Cutoff Wheel [Pack of 25] - Type 1 Alumina Zirconia Cutting Wheel

  • Sturdy Construction: this extra thin metal cutoff wheel has alumina zirconia grit construction. The abrasive wheel has an integrated rib design for a cooler and safer cutting.
  • High Performance: this abrasive grit wheel helps deliver straighter cuts in lesser time. Cut-off wheel with reduced burr and friction is suitable for both manual and machined cutting tasks.
  • Application Range: the ribbed cutting wheel works on steel, stainless-steel, cast iron, and sheet metals. This extra thin ZIP+ ribbed wheel lasts longer without twisting or bending.
  • More Safety: the reinforced ZIP+ wheel has been highly reinforced for operator’s safety. Rough cutting wheel with a sturdy build-up and long life needs fewer replacements.
  • Product Specifications: it measures 4-1/2 in. in diameter, is 1/6 in. thick, and features a 7/8 in. arbor round hole fastening. The package includes 25 ribbed cut-off wheels rated for maximum rotational speed of 13,300 rpm.
Check Stock