ReviewsFlat bed Printer

FYSETC 3D Printer Motherboard Accessories 0.31 in OD 0.78 in Length Compression Springs Light Load for Creality CR-10 10S S4 Ender 3 Heatbed Springs Bottom Connect Leveling - 10 Pack

  • Please Note: The length of it is 20mm which is not suitable for CR10 series products).
  • Die Spring: compatible with most 3D Printer Bed, great Ender 3/2 TronXY X5S/ Geetech A10m heat bed springs, flat top and stiffer.
  • (Note: The length of it is 20mm which is not suitable for CR10 series products).
  • Rectangular Section, strong, keeps print bed level better..
  • They couldn't be easier to install! Unscrew the adjustment knobs from the bottom of your print bed and replace those springs with these new ones. Screw the adjustment knobs back into the print bed with these new springs and you're done! Level your bed and keep on printing!.
Check Stock

WEEDO Tina2 3D Printers, Fully Assembled and Auto Leveling Mini 3D Printers for Kids and Beginners, Removable Plateform, Small Enclosed FDM 3D Printers for Home Use, Build Volume 3.9x4.7x3.9 Inch

  • 【3D Printer for kids & beginners】The small 3D printer is fully assembled. With the simplest setup, you can use it right out of the box. The plug-and-play 3D printer can be the first 3D printer for beginners who are interested in 3D printing and modeling..
  • 【High quality prints】 The entry-level 3D printer was designed with a Cartesian structure with dual linear Z-axes to ensure reliable and fast printing. Factory-ready testing, all you need is to open the box and print directly..
  • 【Auto bed leveling】The printer is beginner-friendly because you no longer have to screw the bed to level it. It calibrated itself with the proximity sensor. The proximity sensor performed a 3-point alignment of the 10*10*10 cm build plate on the substrate at the start of printing..
  • 【Magnetic build plate】It is convenient to pull the entire plate off the printing bed and bend it a little, and the prints come off. No scraper is needed and the masking tape will last longer on the build plate..
  • 【Compact design】The size of the printer is 210*210*290mm. It is a good gift idea for a dorm room....
Check Stock

HICTOP Al13-310 3D Printer with Linear Guide Rail on All Axis Auto Leveling Filament Sensor Metal Large Print Size 300*300*290mm

  • 1. There is a linear guide rail and a screw rod in each axis of the HICTOP Al13-310 3D printer which can greatly improve the printing accuracy..
  • 2.One X axis, double Y axis, and double Z axis of this metal 3d printer are exactly the same with each other if any axis is damaged, it can be replaced directly, which improves the convenience of maintenance..
  • 3. Al13-310 3D printer supports high-speed printing of 300mm/s, we suggest you to print at normal speed for the first layer and add the speed to 300mm/s after the first layer finishes. Special PLA for fast speed 3D printer prints better and normal PLA can also print very well..
  • 4. This printer is reallly easy to use for beginners as leveling the bed is supper easy, you can auto level or manual level the bed and changing the Z offset and no need to roll the wheels under the bed..
  • 5. 32-bit silent motherboard and TMC2209 stepper driver effectively reduce working noise，it is about 55 decibel when printing, not exclusive ultra-quiet but still quite quiet for printer with this structure..
Check Stock

15g 3D Printer Glue Sticks, Aitrip 2Pcs Solid Stickers for 3D Printer Hot Bed Print Filament PLA ABS PET PETG and Other More

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

PVA Glue Stick 3D Printing, FYSETC 3D Printer Parts 3Pcs Solid Adhesive for 3D Printer Ender 3/ Ender 5/ CR10 / Prus Mini MK52 MK3 Hot Bed Print Filament PLA Glass ABS PETG CPE

  • Wide Compatibility: Work well on all 3D Printer hot bed, including spring steel build plate, aluminum or glass bed, PEI sheet, 3d printer stickers etc..
  • Convenience: Easy application, Easy release, Easy clean, Non-toxic, Acid-free, washes off 3D Printer build plate easily with water..
  • Help in 3d printing: Paste it on hot bed beforce printing, strong adhesion to the hot plate, perfect first layer. It is easier to remove the printing models..
  • High-quality and Long-lasting: last for 100+ average prints, helps 3D print parts adhere to the build plate during printing..
  • Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
Check Stock

Comgrow Creality Ender 6 3D Printer Stable Core XY Structure with 3 Times Faster Printing Speed Acrylic Enclosure Silent Board Glass Bed 9.8 x 9.8 x 15.7 inch

  • Faster Printing Speed and Higher Precision: Thanks to the Core-XY mechnical structure, the Ender-6 enclosed 3d printer can reach print speeds up to 150mm/s, which is 3 times faster than other Ender printers and many of its competitors. In terms of printing accuracy and printing speed, the newly-released Creality Ender-6 is the most powerful and capable FDM 3D printer in the Ender series..
  • Optional Semi-closed Build Chamber: An acrylic enclosure is an optional upgrade for the Ender 6 corexy 3d printer. With acrylic plates added on the four sides of the printer, this Creality 3d printer is better at preserving the temperature within the print area, which will extend filament choices from PLA to ABS, TPU, and more. Meanwhile, the transparent plates still allow real-time monitoring of 3D printing process from 360° around..
  • Ultra Silent Main Board: Creality Ender-6 core xy 3d printer is custom-built with an ultra-silent Germany-imported TMC motion controller, enabling the printing process won't make any noise and ensuring smooth movement under 50dB..
  • Elegant Appearance: The Ender-6 is revamped with a new look: an integrated all-metal chamber body, strong Creality-blue corner connectors and acrylic open door structure giving the FDM 3d printer a very elegant....
Check Stock

BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer

  • A general add-on heated bed power expansion module for 3D printer.
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8.
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A.
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.).
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive....
Check Stock

Creality 3D Printer CR-10 S5 CR Touch auto Leveling 3D Aluminum DIY Printer with Resume Print Open Source Large Print Size 500*500*500MM

  • 【THE LARGEST CREALITY 3D PRINTER】 Creality 3D printer CR10 -S5 is the largest 3d printer. The Creality CR-10 S5 desktop 3D printer offers the....
  • 【CR TOUCH AUTO BED LEVELING SENSOR KIT】The Creality Largest FDM 3D printer CR10-S5 new version comes with CR touch. High Precision Intelligence....
  • 【DUAL Z-AXIS AND DUAL MOTOR】Creality CR10S 3d printer has Dual Lead Screw Z-axis design, give much stability and accuracy than single lead screw....
  • 【POWER LOSS RECOVERY AND FILAMENT SENSOR FEATURES】The function of CR10S-5 detecting filament run-out or breakage/power loss and resume printing....
  • 【SOLID GLUE STICK INCLUDED IN PACKAGE 】Creality CR10S 5 has comes with large hot bed, preheating time make longer than others, and there is the....
Check Stock

Creality Ender 3 Pro 3D Printer with UL Certified Power Supply Removable Build Surface Plate Resume Printing Function Free Filaments & Nozzles FDM DIY 3D Printers 32bits Mainboard 220x220x250MM

  • Resume Printing Function: This Creality Ender-3 Pro 3D Printer supports resume printing from the last recorded extruder position after suffering unexpected power outages or your stopping printing. Ensuring excellent printing effect & use experience for you..
  • Removable Magnetic Hot-bed Surface: The Ender-3 Pro 3D Printer is assembled with removable magnetic hot bed surface for good adherence and easy removal of models. No need to spatula or razor models after printing..
  • 32-bit Motherboard: The Printer is equipped with Advanced built-in 32-bit motherboard. The printer won’t disturb your work or rest during printing, no noise with great printing effect..
  • Working Temperature: It only takes about 1 Minute to heat up Temperature of the nozzle and the hot bed. Suggested setting: 210 degree of nozzle & 50-60 degree of hot bed for using PLA/ ABS Filament, 245 degree of nozzle & 60-65 degree of hot bed for using TPU/PETG Filament..
  • Official Creality 3D Amazon Shop: All of our printers are delivered from official creality 3D Amazon shop with considerate 24 Hours After-Sales Services including original part replacement For Free and technology consult, ensuring remarkable user experience! Pls Contact us At Any Time if you need any help here!.
Check Stock

3IDEA Imagine Create Print Crazy3DPrint CZ-300 3D Printer - with Heated Print Bed, Aluminum DIY Kit, Large Build Area of 300x300x300mm

  • Designed for Functionality:_ The CZ-300 is a compact 3D printer that is designed for DIY and prototyping purposes. It can be connected to a computer via USB 2.0 or print pre-loaded files onto a memory card and SDHC slot..
  • Hot Bed and Temperature Control:_ Equipped with a heated print bed, this compact DIY printer can function at consistent temperature range of 40 to 90 degree C. This can be helpful when working with filaments that require a heated print bed..
  • Large Build Area:_ This printer provides a large build area of 11.8x11.8x11.8 inches (300x300x300mm) in length breadth and height. Thus, you can print considerable larger models for better observation and functionality..
  • LCD Graphical Interface:_ The printer is integrated with a 3 inch LCD display screen. It allows you to view the print status, select the file and other printer parameters. This graphical interface is optimised for friendly usage..
  • Compatible with Various Filaments:_ The printer supports a wide range of filament types to allow you to explore and experiment more. It is compatible with PLA, ABS, PETG, Carbon PLA, and metallic PLA..
  • Distinct Nozzle Design:_ The nozzle of CZ-300 is made of copper and has a diameter of 0.4mm. It supports a maximum temperature of 60 degree C. It is des....
Check Stock

3 Pack 16'x16' (400mmx400mm) Square 3D Printing Build Surface Heat Bed with Adhesive for 3D Printers, Cuttable to Any Size

  • 【PACK of 3】Our 3D Printer build plates are 16" x 16" (400mm x 400mm) square, fully matches heated bed on many popular 3D printers, such as Cr-10 S4, Formbot T-rex, Wombot Modus 3D printer, Creatbot, Tevo Black Widow, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry..
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Com....
Check Stock