ReviewsFlex Nut Locknuts

1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,，UL Listed, (2 PACK) (1-1/2inch 180d)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

Independent Skateboard Hardware 1\ Phillips Black/Red 8 Nuts and Mounting Bolts

  • Includes 8 axle washers and 4 axle nuts from Dimebag Hardware..
  • Speed washers increase speed and promote longer bearing life by reducing friction between the bearing and axle nut and hangar..
  • Having brand new lock nuts will keep your wheels from falling off. The more you replace your wheels and bearings, the more the axle nuts wear out and lose their ability to stay tight. These fresh new nuts will keep you locked up! Produced with top quality materials. The thread size for these axle nuts is 5/16"..
  • This kit features products that are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size)..
  • The 4 locknuts and 8 washers included are enough to outfit 2 trucks..
Check Stock

SEWA20 Adjustable Lock-nut Grinder Wrench by BlueStars - Exact Fit For Dewalt Bosch & other Grinders 10 - 30mm

  • ✅ ADJUSTABLE DESIGN - The lock-nut grinder wrench features an adjustable range of 0.5 to 1.25 inches.
  • It’s a convenient tool to own if you own....
  • ✅ HIGH-QUALITY TOOL - Featuring a high-quality carbon steel body, the tool offers long-lasting reliability. Heat-treated pins ensure a strong grip.....
  • ✅ HANDY CONSTRUCTION - Feels firm on your hand while using it.
  • Perfectly insulated on the handle section to give it a firm grip and protecting your....
  • ✅ EXCELLENT COMPATIBILITY - Suits most grinders and locknuts. ideal replacement pin wrench for all angle grinders, bench grinders, circular saws,....
Check Stock

Qualihome Universal Side Mount Toilet Handle Tank Flush Lever Replacement Handle, White Finish Toilet Handle

  • Qualihome Side Mount Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a White finish Handle with PLASTIC Lock Nut and rubber washer, Pre-Drilled 8-Inch Rod.
  • Easy to install, The universal design fits most side-mount applications, Durable construction.
  • Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
  • Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
  • 4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed..
Check Stock

White Toilet Tank Flush Lever Handle, Universal Front Mount with Nut Lock, Fits Most Toilets

  • Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a White finish Handle with Lock Nut, Pre-Drilled 8-Inch Rod.
  • The universal design fits most front-mount applications, Fits Most Toilets, Durable construction, Easy to install.
  • Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
  • Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
  • 4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed. Packaging design may vary..
Check Stock

Qualihome Universal Side Mount Toilet Handle Tank Flush Lever Replacement Handle, Chrome Finish Toilet Handle

  • Qualihome Side Mount Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a Chrome finish Handle with PLASTIC Lock Nut and rubber washer, Pre-Drilled 8-Inch Rod.
  • Easy to install, The universal design fits most side-mount applications, Durable construction.
  • Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
  • Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
  • 4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed..
Check Stock

Brushed Nickel Toilet Tank Flush Lever Handle, Universal Front Mount with Nut Lock, Fits Most Toilets

  • Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a Satin Nickel finish Handle with Lock Nut, Pre-Drilled 8-Inch RodThe universal design fits most front-mount applications, Fits Most Toilets, Durable construction, Easy to install.
  • The universal design fits most front-mount applications, Fits Most Toilets, Durable construction, Easy to install.
  • Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
  • Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
  • 4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed..
Check Stock

Glvaner (10 Sets) M10-1.5 x 25mm Thread Length Flat Round Head Socket Head Cap Screws with Hex Locknuts 304 Stainless Steel Furniture Screws Projects

  • Package Includes: 10 Pcs M10 Screws and 10 Pcs M10 Hex Locknuts.
  • Material: 304 stainless steel (A2) and no exterior finish, greater strength and corrision resistance performance than regular stianless steel or zinc plated fasteners..
  • Included 10 pcs free same size M10 Hex Locknuts to help save your time and money to find nuts.The locknuts are also made of 304 stainless steel and could be found seperately in our shop for your needs..
Check Stock

Mssoomm 20mm CNC Ballscrew Kit SFU2010 RM2010 Anti-Backlash Ball Screw, L 59.06 inch / 1500mm + Nut + BK/BF15 Bearing End Supports + Coupler + Nut Housing+ Motor Bracket for Nema 23 Stepper Motor

  • Nut + BK15 integrate with Motor Bracket for stepper motor Nema 23/BF15 End support with locknuts and circlips + Flexible coupler + Ball Screw Nut Housing, (The coupler bore for the motor shaft is 8mm in default),Precision C7 Grade.
  • The product can ensure motor shaft, coupling axial, axial bearing hole, and screw axis all in a line strictly, to make the transmission system run more accurately and sturdily, less noise and longer life.
  • The ballscrew is no stick-slip effect, heats up less, reduce driving power required, small starting torque, able to apply high speed and micro-feeding.
  • The material of the bk bearing support and Motor Bracket is cast steel, high hardness, shock resistance and high precision machining.
  • We can provide complete information of the products, the drawing is showed in the image 6.（If you need CAD and 3D modeling files, you could give us Amazon Message）, we have full ranges of ballscrew products, any special needs, please let us know.
Check Stock

Universal Offset Decorative Front, Side, Corner, or Angle Mount Toilet Tank Flush Trip Lever Handle with Metal Nut, Fits Most Toilets (Chrome)

  • Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
  • The self-tightening nut helps prevent loosening over time and provides a quick installation on the front, side or at an angle on the tank, arm can be bent or cut as needed.
  • This Modern style die cast metal lever can add a new stylish touch to your bathroom and will help your toilet.
  • The brass arm is durable for everyday flushing and designed to fit most front mount tanks. For proper toilet flapper chain placement, the 10-inch arm has 6 pre-drilled holes.
  • The sturdy handle is easy to grasp. Toilet tank lever works on many of the industry’s top toilet manufacturers including American Standard, Toto, Kohler, Gerber, Mansfield and Elijer..
Check Stock

Mssoomm 16mm CNC Ballscrew Kit SFU1605 RM1605 Anti-Backlash Ball Screw, L 59.06 in/1500mm + Nut + BK/BF12 Bearing End Block Supports + Coupler + Nut Housing+ Motor Bracket for Nema 23 Stepper Motor

  • Nut + BK12 integrate with Motor Bracket for stepper motor Nema 23/BF12 End support with locknuts and circlips + Flexible coupler + Ball Screw Nut Housing, (The coupler bore for the motor shaft is 6.35mm in default),Precision C7 Grade.
  • The product can ensure motor shaft, coupling axial, axial bearing hole, and screw axis all in a line strictly, to make the transmission system run more accurately and sturdily, less noise and longer life.
  • The ballscrew is no stick-slip effect, heats up less, reduce driving power required, small starting torque, able to apply high speed and micro-feeding.
  • The material of the bk bearing support and Motor Bracket is cast steel, high hardness, shock resistance and high precision machining.
  • We can provide complete information of the products, the drawing is showed in the image 6.（If you need CAD and 3D modeling files, you could give us Amazon Message）, we have full ranges of ballscrew products, any special needs, please let us know.
Check Stock