ReviewsFlexible Feeler Gauge

Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (0.0015/0.04-0.025/0.635 mm, 26 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 26 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015/ 0.04 - 0.025/ 0.635 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.04 mm, 0.05 mm, 0.06 mm, 0.08 mm, 0.10 mm, 0.13 mm, 0.15 mm, 0.18 mm, 0.20 mm, 0.23 mm, 0.25 mm, 0.28 mm, 0.30 mm, 0.330 mm, 0.35 mm, 0.38 mm, 0.40 mm, 0.43 mm, 0.48 mm, 0.45 mm, 0.50 mm, 0.53 mm, 0.55 mm, 0.58 mm, 0.60 mm, 0.63 mm.
  • Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025 inches.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don't worry about that.
Check Stock

Feeler Gauge MTQY 17 Blade 0.02mm to 1mm Thickness Gap Metric Filler Feeler Gauge Measure Tools

  • Specifications: Feeler gauges are indicated in metric. Thicknesses range from 0.02mm to 1mm..
  • Material: The feeler gauge is made of spring alloy steel, heat treated in its entirety, and coated with lubricating oil, which is not easy to wear to prevent pitting and corrosion..
  • Dimensions: Overall Length: 150mm/5.9inch.
  • Blade Dimensions: 150 x 13mm /5.9 x 0.5inch (L x W).
  • Easy identification: 17 blades have clear thickness on each blade for easy identification..
  • each measuring feeler gauge has 17 blades and can be folded for easy carrying and storage..
Check Stock

Engine Timing Light with Feeler Gauge 32 Blades,Inductive Timing Light Gun Timing Light Ignition Testers Engine Ignition Coil Tester for Car Motor Vehicle Motorcycle Marine Lawnmower Measuring Gap

  • ...le length up to 4.41ft .Never worry about the length of the cable is not long enough.Adapts to all kinds of 12V battery for automobiles, motorcycles, ATVs, personal watercraft, RVs, boats, airplanes, golf carts, lawn mower, etc ..
  • ★ Stainless Steel Feeler Gauge As Bonus★ - Use feeler gauge to measure gap.This is flexible easy to get into all places. Blades are able to be together or can unscrew finger nut to take feeler out. 2 Different units of measuring: Dual marked metric and imperial, 0.0015 in/ 0.04 mm to 0.035 in/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification.Perfect for setting lifter, sparking plug, points gap etc. With anti-rust oil on feeler gauge to prevent rust..
Check Stock

Rannb Metric Feeler Gauge Gap Measurement Tool 12-inch Long 17 Blades 0.02-1.00mm Thickness

  • ⭐【Material】The feeler gauge is constructed from manganese steel with a lube oil coating to prevent pitting and corrosion..
  • ⭐【Dimension】Total Size: 300mm x 15 x 6mm/12" x 0.6" x 0.24"(L x W x H).
  • ⭐【Specification】 Metric sizes (mm):0.02, 0.03, 0.04, 0.05,0.06, 0.07, 0.08, 0.09, 0.10,0.15, 0.20, 0.25, 0.30, 0.40, 0.50, 0.75, 1.00. The feeler gauge is marked in metric. Thickness ranges from 0.02mm to 1.00mm..
  • ⭐【Easy to Identify】 Every blade has its thickness clearly on it for easy identification..
  • ⭐【Package Content】1pcs x Feeler Gauge.
Check Stock

Glarks 2 Pack Stainless Steel Feeler Gauge Set, 32 Blades 0.04-0.88 mm Dual Marked Metric and Imperial Gap Measuring Tool and 16 Blades Standard SAE and Metric Gap Width/Thickness Measuring Tool

  • ★【What You Get】: In this feeler gauge set, it include 32 blades dual marked metric and imperial gap measuring tool, 16 blades standard SAE and metric feeler gauge, they are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the feeler gauge are made of high quality steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: 32pcs metric and imperial tool measuring range is 0.0015 Inch (0.04mm) to 0.035 Inch (0.88 mm), 16pcs standard SAE and metric feeler gauge measuring range is 0.0015 Inch 0.005 Inch(0.127) to 0.020 Inch ( 0.508 mm)..
  • ★【Easy to use】: Designed with a hole on each end, use screw for easy adjust and disassemble, from where you press the tooth gauge, you can easily rotate the blades, tools are contains a blade notch for easy blade removal, numbers are stamped clear for read..
  • ★【Wide Application】: They measure accurately and have almost no errors, will help you quickly and easily measure gap width/thickness. Suitable for designers, engineers, mechanics to measure the tappet clearances, spark plugs gaps, bearing clearances, piston ring gaps, guitars gaps, engines ....
Check Stock

Eastyard Stainless Steel Feeler Gauge 32-Piece Blade Tool for Gap Width/Thickness Measurements (Measuring Range: 0.001\-0.04\)

  • High Quality: 32 Hardened, Tempered Steel Blades made of 65 manganese steel, each blade has sizes laser etched for easy identification..
  • Measuring Range：0.001" to 0.04" (0.03 mm-1.00 mm), the numbers of size are etched into feeler gauge for easy identification..
  • Easy to Use: The feeler gauge is easy to carry and store. It can be folded, turned 360 degrees and removed when needed..
  • Scope of Application: Ideal for designers, engineers, and mechanics to accurately measure the thickness of hard-to-reach places..
  • Quality Assurance: It is normal to have some anti-rust oil on the stainless-steel feeler gauge, please don't worry. If you have any product issues, we’re very happy to provide you some advice..
Check Stock

WonVon Universal Spark Plug Gap Tool with Feeler Gauge Compatible with Most 10mm 12mm 14mm 16mm Spark Plugs Black

  • Precise control of spacing. Solve the problems of your car's increased fuel consumption, difficulty in starting, unstable idling, and insufficient power..
  • Compatable with - Universal For 10mm 12mm 14mm 16mm Spark Plugs.Used Your Desired Size Feeler Gauge For Gap Thickness.The Kit Provides Feeler Gauge.
  • Spring Back NOTE - Some Spark Plugs Electrode Will Spring Back - This Is Normal For Some Spark Plugs.If Your Gap Target Is 0.44mm We Suggest To Use 0.42mm This Way When It Spring Back You Will Get It To 0.44mm..
  • HIgh Quality Guarantee - Every Tool Is Strictly Tested Before Leaving The Factory.This Spark Plug Gap Tool Will Give You That Perfect Gap Every Time.Simply Place Your Spark Plug Onto The Gap Tool Perfectly..
  • Item Inclute - 1x Spark Plug Gap Tool，1x Feeler Gauge..
Check Stock

CAMWAY Bent Feeler Gauge 16 Blade Feeler Gauge Imperial/Metric 45º Blades Offset Stainless Steel Feeler Gauge Measuring Tools for Measuring Gap

  • 45º Blades Offset,The stainless steel feeler gauge is used to measure the gap size..
  • Metric sizes (mm): Includes metric sizes 0.508, 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483 mm.
  • Standard SAE(inch sizes): 0.020, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, and 0.019 inches.
  • Material:The Bent Feeler Gauge made of 65 manganese steel,high strength. Dimension(L x W x H)：103.7x13x26.5 (mm),Weight：66.1g.
  • Scale clear, easy to use,Metal fastening screws, durable,Please don't put on the humid environment.There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty..
Check Stock

StewMac String Action Gauge And Ruler Metric Stainless Steel - Designed by StewMac The Original measuring tool for acoustic and electric guitar and bass setup

  • Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt....
  • Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common....
  • Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
  • String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure....
  • Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20....
Check Stock

uxcell 0.02 to 1mm Thickness Gap Metric Filler Feeler Gauge 6 Long

  • Total Size : 155 x 15 x 7mm / 6" x 0.6" x 0.28" (L*W*T).
  • Thickness (mm) : 0.02, 0.03, 0.04, 0.05,0.06, 0.07, 0.08, 0.09, 0.10,0.15, 0.20, 0.25, 0.30, 0.40, 0.5, 0.75, 1.00.
Check Stock

Wokape 6Pcs 5 Sizes Stainless Steel Radius Gauge with Feeler Gauge Kit, 5 Sizes Metric and Imperial R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25/ R26-80 Arc Fillet Concave Convex Gap Measuring Tool

  • 【What You Get】 ------ In this kit, You will get 5 different Sizes Stainless Steel Radius Gauge, Including R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25/ R26-80 , Each sizes has 1Pcs. These Radius Gauge can meet all your various need. With Stainless Steel Feeler Gauge Dual Marked Metric (0.04-0.88 mm, 32 Blades)..
  • 【High Quality】 ------- This radius gauge is made of high quality stainless steel, durable, high hardness and resistant to rust. There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that..
  • 【Stainless Steel Radius Gauge Excellent Design】------- The 360-degree Locking Screw design allows you to unfold or fold it easily. Each leaf is clearly marked, convenient to identify which leaf you need..
  • 【 Stainless Steel Feeler Gauge Sizes 】------- Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88. Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035..
Check Stock