ReviewsFlexible Impeller Pump

Volvo Penta Sea Water Cooling Pump Impeller Kit New OEM 4.3L,5.0L,5.7L 21951346

  • Water impeller are made of high quality neoprene,brass.High performance and durable..
  • Impeller replaces Jabsco 1210-0001,Johnson 09-1027B 09-1027B-1,OMC 3588256,Sierra 18-3081,SIE 18-3081,GLM 89540,Mallory 9-45703,Onan 132-0162,Perkins....
  • Water pump impeller diameter is 2-1/4",width is 1-1/4",shaft Diameter is 16mm..
  • Water pump impeller are 100% brand new and don't used or rebuild..
  • Water impeller have 12 months warranty and directly replacement and easy to install..
Check Stock

Simple Deluxe LGPUMP1056GX2 1056 GPH Submersible 15' Cord Water Pump for Fish Tank, Hydroponics, Fountains, Ponds, Statuary, 2 Pack

  • PRE-FILTER INCLUDED - Pre-filter on the intake prevents debris from entering your pump and extend the life of your pump, Max flow rate: 1056 GPH, Max Lift Height 12ft.
  • DURABLE QUALITY - Our Polished Aluminum Oxide Ceramic Impeller Shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts.
  • SAFE & EASY - Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean filter/impeller. Our Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures.
  • 3 size threaded nozzles.83in, 1.06in, 1.34in) – PLEASE NOTE inline and outlet nozzles has different thread size. The thicker ones are for Inline use and the thinner ones are for outlet.
  • VERSATILE - Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems.
Check Stock

Jabsco 37010-1090 Electric Marine Toilet Push Button Operation Macerator Household Size 12 Volt

  • Permanent magnet type motor, fully enclosed, with stainless steel shaft.
  • High capacity macerator and bowl scavenger pump.
Check Stock

Simple Deluxe 1056GPH 276W Submersible Pump With 15' Cord, Water Pump For Fish Tank, Hydroponics, Aquaponics, Fountains, Ponds, Statuary, Aquariums & Inline

  • #1 has pre-filter included - Pre-filter on the intake prevents debris from entering your pump and extend the life of your pump, max flow rate: 1056 GPH, max lift height 12 feet.
  • Durable quality - Our polished aluminum oxide ceramic impeller shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy resin encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts.
  • Safe & easy - Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean filter/impeller. Our electric cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures.
  • 3 size threaded nozzles. 83 inch, 1.06 inch, 1.34 inch) – Please note inline and outlet nozzles has different thread size. The thicker ones are for Inline use and the thinner ones are for outlet.
  • Versatile - Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems.
Check Stock

Jebao/Jecod RW Series Wavemaker with Controller (RW-4 RW-8 RW-15 RW-20) (RW-4)

  • Newest 2020 model with an updated controller.
  • Unique Control system allows to wave off different types and multiple functions..
  • Wireless controllers allows synchronized operations among wave makers..
  • Low Voltage DC Electronic pump with variable frequency provides a safe environment for user..
  • Easy operation to achieve the multiple sea wave. Easy installation with magnetic base. #1 Check the indicator light on the power supply. Green light means that the controller is working. no light means bad power supply. #2 check the controller, if the controller can't switch mode or speed possible bad controller. #3 Power supply checked, controller checked. but pump not working, please try to re-install the pump impeller to reset the pump. If still not working after re-install the pump impeller possible bad pump motor. #4 Extremely noisy issue - please try re-install or replace the pump impeller or re-install the both side mount basket gasket..
Check Stock

WINGOGO Water Pump Impeller 47-F436065-2 for Chrysler Force Sears Gamerfisher Outboards 9.9-10-12-15-20-25 HP Replacement Montgomery Wards Sea King Boat Motors Parts Sierra 18-8903

  • Water Pump Impeller Dimensions : Shaft Size: 0.508 inch, OD: 2.244 inch, Thickness: 0.594 inch, Blades 6. Neoprene Water Pump Impeller Plastic Hub as Pictures Showed, Please see the pictures..
  • Replaces P/N 47-F436065-2 47-F436065-1 47F4360652 47F4360651 Sierra 18-8903. This Water Pump Impeller is replacement for Chrysler Force Outboard..
  • Replacement for 9.9hp 10hp 12hp 15hp 20hp 25hp Chrysler Force Sears Gamefisher Outboard Boat Motors Engine Parts Cooling System. More Detailed Information Please See Description Below..
  • Cross Part number Reference 47-F4360652 47F436065-2 47-F4360651 47F436065-1 47-F436065 47F436065. This Impeller Makes Repair and Maintenance of Water Pumps Easy..
  • Find the Correct Water Pump Impeller for your Boat Motor. It is VERY IMPORTANT to Check your Outboard Model or S/N before Purchase. You can leave us message e.g. your Boat Engine Horsepower, Year, Model or Serial Number. We’re pleasure to help you if you're unsure it..
Check Stock

Water Pump Impeller 369-65021-1 47-16154-3 18-3098 for Mercury Sierra Tohatsu 2HP 2.5HP 3.5HP 4HP 5HP 6HP

  • Water motor impeller have 6 blades.Height:14.30mm,External Impeller Overall Diameter:33.58mm,Internal Shaft Insert Diameter:10.25mm..
  • This aftermarket impeller replaces Mercury outboard motor part #47-16154-3,Tohatsu outboard motor part 369-65021-1, impeller 18-3098..
  • Water pump impeller are 100% brand new and don't used or rebuilt..
  • Similar in design to stock OEM units and require only simple hand tools for installation.Direct replacement,OE level quality and durability..
  • Water pump impeller 100% compatible with OE parts and passed TS16949 certified.Fits for Mercury/Mariner (4-STROKE) Carb 2HP 2.5HP 3HP,Mercury/Mariner (2-STROKE) 4HP 5HP,6HP..
Check Stock

mistcooling Patio Misting System - 160psi (12VDC-12 Nozzles Kit - W/Out Enclosure)

  • Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
  • Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.
Check Stock

attwood Sahara MK2 800 GPH 12-Volt Automatic Bilge Pump

  • 800 GPH, 12V, Fuse size: 4A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
  • The easiest, most reliable automatic bilge pump ever designed.
  • The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
  • Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
  • Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
  • Universal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its category.
  • SteadySwitch: Buoyancy control reduces cycling, draining the bilge not the battery.
  • No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.
  • Improved Motor Cooling/Heat Dissipation: Prevents overheating that may cause failures, such as blown fuse, leaking, etc..
  • Includes straight outlet and check valve.
Check Stock

For Milwaukee utility pump 2771-20 M18 Water Transfer Pump (TOOL ONLY)

  • Faster Water Transfers, Faster Service Calls. The M18 Transfer Pump brings new to world cordless innovation to the industry with the fastest setup in the marketplace. With a self-priming pump, you can connect and go quicker than ever. The tool’s flexible impeller and powerful pump moves water at up to 480 gallons per hour, generates up to 18’ of lift and produces up to 75’ of head height..
  • Features:Cordless Transfer Pump, Battery Platform M18, Maximum Flow Rate 8.
  • Voltage: 18V Length & Width x Height: 13.2" x 5.75" x 6" Head Height: Up to 75ft Outlet/Inlet Connections: 3/4" Lift up to 18' Weight: 7.9 lbs.
Check Stock

2771-20 M18 For Milwaukee Tool Water Transfer Pump (Bare Tool)

  • Features:Cordless Transfer Pump, Battery Platform M18, Maximum Flow Rate 8.
  • Voltage: 18V Length & Width x Height: 13.2" x 5.75" x 6" Head Height: Up to 75ft Outlet/Inlet Connections: 3/4" Lift up to 18' Weight: 7.9 lbs.
  • Faster Water Transfers, Faster Service Calls. The M18 Transfer Pump brings new to world cordless innovation to the industry with the fastest setup in the marketplace. With a self-priming pump, you can connect and go quicker than ever. The tool’s flexible impeller and powerful pump moves water at up to 480 gallons per hour, generates up to 18’ of lift and produces up to 75’ of head height..
  • Inlet connection: 3/4 in. brass Outlet connection: 3/4 in. brass Head height: up to 75 ft..
Check Stock