ReviewsFlexible Metallic Conduit

Klein Tools 85091 Power Conduit Reamer with Improved Bit Retention, 1/2-, 3/4- and 1-Inch

  • Power Conduit Reamer reams 1/2-Inch (13 mm), 3/4-Inch (19 mm) and 1-Inch (25 mm) conduit and install fittings in a fraction of the time.
  • Reduce time on projects with large quantities of conduit runs.
  • Designed to fit into power drill chucks and quick release adapters with improved bit retention.
  • Includes precision engineered replaceable reaming blade.
  • Replacement blades (SKU #19353) are available and the only approved blade for use in our tool.
  • Designed to be used on Electrical Metallic Tubing (EMT).
Check Stock

Rectorseal 66345 Metacaulk Fire Rated Putty Sticks

  • Putty Sticks are used to seal around penetrating items through fire-rated walls, floors and within blank openings.
  • For use with electrical cables, conduit and metal pipes.
  • Will not dry out and can be re-used as additional penetrating items are removed or installed.
  • Hand moldable with no curing time required.
  • No additional putty material needed to plug the end of each electrical metallic tube or conduit at its connection to the box.
Check Stock

Southwire - 59896940 Tools & Equipment FTSP45-125FML SIMPULL Fish Tape 4.5mm 125-Feet Flexible Metal Leader, Large Case

  • Works great in either filled or empty conduit.
  • TWO LEADER OPTIONS: comes with either a 360 swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
  • FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
  • SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.
  • DOES NOT RUST.EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded.
Check Stock

Southwire - 63029840 Tools & Equipment FTSP45-75NCT Simpull Electrical Fish Tape with Non-Conductive Tip, Large Case, 4.5mm x 75 Feet

  • Works great in either filled or empty conduit.
  • TWO LEADER OPTIONS: comes with either a 360° swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
  • FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
  • SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.
  • EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded.
Check Stock

Sealproof 1/2-Inch Flexible Non-metallic Liquid-Tight Electrical Conduit Type B, UL Listed, 1/2\ Dia, 100 Feet, Made in USA

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B metallic or nonmetallic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

Southwire FTSP45-125NCT Simpull Electrical Fish Tape with Non-Conductive Tip, Large Case, Two Leader Options, Spiral Extruded Polymer, Extremely Flexible, 4.5mm x 125 Feet

  • Works great in either filled or empty conduit.
  • TWO LEADER OPTIONS: comes with either a 360 swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
  • FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
  • SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded..
Check Stock

Southwire 58133701 3/4-in Liquid-Tight Connector,Grey

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

Klein Tools 80035 Level, Digital Electronic Level and Angle Gauge Tool Kit with Plumbers Straps, Measures Angles, Magnetic Base, 2-Piece

  • MEASURE OR SET ANGLES, check relative angles, or can be used as a digital level.
  • REVERSE CONTRAST DISPLAY improves visibility.
  • MAGNETIC BASE attaches to conduit, pipes, saw blades and other ferromagnetic surfaces.
  • V-GROOVE EDGES enable optimal alignment on conduit and pipes.
  • DIGITAL LEVEL MEASURES 0-90 Degree or 0-180 Degree ranges.
  • PLUMBER'S KIT straps to non-magnetic pipes and conduit to present a magnetic surface.
  • FLEXIBLE, ADJUSTABLE LENGTH STRAPS connect the metal plate to pipes, conduit, or other objects.
Check Stock

Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 1/2-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1/2\ Dia

  • Use with Sealproof straight or right angle connectors.
  • can be used with any Type B metallic or nonmetallic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

1/2 Npt Nonmetallic Liquid-Tight 180-Degree Electrical Conduit Connector Fitting,,UL Listed, (6 PACK) (1/2-180D)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,,UL Listed, (2 PACK) (1-1/2inch 180d)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock