ReviewsFlexible Shaft Couplings

Aopin Flexible Beam Couplings 6mm to 6mm Flexible Coupler Shaft for 3D Printer, Length 25mm / 1\ Motor Coupler Connector, Great Apply for Model Shaft, CNC Machine, Motor Guide, DIY Encoder 2 Pcs

  • Size:Diameter 25mm Length 30mm/Diameter 1inch Length 1.2inch. Bore 8-8mm/0.3-0.3inch. Type: Plum shaped.
  • Material: Using Aviation Aluminum with corrosion resistance High Hardness, High Precision, Anodized Surface Treatment, Strong and Durable. Spider Material (Elastomer) Uses T-PUR, Longer Service Life.
  • Super Torque: Can Absorb Vibration, Appropriate a Large Torque Transmission.High Hardness,Durable,and Excellent Response,Not Easy to Loosen.
  • Vibration-damping: Flexible Spider Couplings Offset Angular, Radial and Axial Shaft Displacement Within Defined Ranges. The Elastomer Dampens Shock and Torsional Vibrations in The Drive Train.
  • Wide Range of Usage: Flexible Couplings is Suitable to Offset Axial, Radial and Angular Displacements and Dampen Vibrations and Torque Shocks for 3D Printer DIY Encoder CNC Router Machine Servo Stepped Motor and Engraving Drilling Milling Machine.
Check Stock

Tsubaki (UST) 6018F 1 3/16 Chain Coupling Hub - 60 Chain, 18 Teeth, 1-3/16 in Finshed Bore

  • For use with Martin Quadra-Flex series flexible couplings (sold separately).
  • Cast iron for non-corrosive applications where strength and heat dissipation are factors and weight is not.
  • Transfers shock and misalignment to the center element of the coupling assembly for reduced wear on the shaft assembly.
  • Teeth help to distribute torsional load across the flange and sleeve, reducing wear and extending service life.
Check Stock

Aopin Rigid Flange Coupling 5mm Inner Flange Coupler Shaft for 3D Printer, Length 15mm / 0.59\ Motor Coupler Connector, Great Apply for Model Shaft, CNC, Motor Guide, DIY Encoder 4 Pcs

  • 【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
  • 【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
  • 【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
  • 【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
  • 【Package】: 4 Pcs Rigid Flange Couplings. Aopin Recommends Using M2 Hex Wrench!.
Check Stock

uxcell 6.35mm to 6.35mm Shaft Coupling 25mm Length 20mm Diameter Stepper Motor Coupler Aluminum Alloy Joint Connector for 3D Printer CNC Machine DIY Encoder

  • 【Flexible Couplings Beam Shaft Size】: 6mm to 6mm / 0.24" to 0.24". Coupling With M4 Fastening Screws. Outer Diameter: 19mm / 0.75.
Check Stock

Creality Original Updated Flexible Couplings 5mm to 8mm NEMA 17 Shaft for CR-10S Ender 3 PRO 3D Printer and CNC Machine(4PCS)

  • Perfect fix Ender 3,Creality CR-10S series 3D Printer and other NEMA 17 stepper motors (for 5mm to 8mm shaft diameter).
  • Useful in RepRap 3D Printers and small CNC machines..
  • Note:It's the same as Ender 3 and Creality CR-10S series 3D Printer Flexible Couplings.
Check Stock

1 Piece Clamp 1/2\ x 5/8\ Bore Dia. Steel Rigid Shaft Coupling

  • Item - Rigid Shaft Couplings: Rigid Shaft Coupling, Clearance Dia. (In.): 1-9/16, Max. Torque (In.-Lbs.): 710.
Check Stock

uxcell 6mm to 12mm Bore L31xD25 Flexible Coupling Jaw Coupler Shaft Joint for Servo Motor

  • General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
  • It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
  • Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stock

uxcell 5mm to 6.35mm Bore L31xD25 Flexible Coupling Jaw Coupler Shaft Joint for Servo Motor

  • General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
  • It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
  • Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stock

uxcell 10mm to 10mm Bore Rigid Coupling Set Screw L22XD16 45# Steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 10mm to 10mm, Total Length: 22mm /0.87 inch, Outside Diameter : 16mm/ 0.63 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 45# steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 7mm to 7mm Bore Rigid Coupling Set Screw L22XD14 Copper,Shaft Coupler Connector,Motor Accessories

  • Total Length: 22mm/0.87 inch, Outside Diameter : 14mm/0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock