ReviewsFloat Level Switch

Superior Pump 92333 1/3 HP Thermoplastic Pedestal Sump Pump

Large floats detect 1/4 in. water level rises, automatically activating the sump pump.
Second float provides additional protection to ensure automatic pump activation.
Protective float switch cage helps keep debris and wires from interfering with float movement.
vented, curved bottom reduces debris build-up under the float.
Allows the sump pump to run for an additional 10 seconds to drain excess water from the sump pit.

Large floats detect 1/4 in. water level rises, automatically activating the sump pump.
Second float provides additional protection to ensure automatic pump activation.
Protective float switch cage helps keep debris and wires from interfering with float movement.
vented, curved bottom reduces debris build-up under the float.
Allows the sump pump to run for an additional 10 seconds to drain excess water from the sump pit.

Type: 2PCS M16 Water Level Sensor, Switching voltage (Max): 110V DC.
Float level switch is a kind of liquid level control device with simple structure, no external power supply, no complicated circuit, convenient to use. Has the advantage of smaller size and longer service life than mechanical switch..
Mainly used to sense the liquid level in a tank to turn on/off a pump, an indicator , an alarm or other device..
2 Way optional to install as normally closed/open switch according to your needs..
Suitable for hydroponics, saltwater , freshwater , gardening, aquariums for power control, pet bowls, fish tanks, filtration, heating etc..

Temperature Rating: -30~125 degree Centigrade.
Max Switching Current: 0.5A ； Max Contact Resistance : 100m ohm.
Float Ball Size(Approx) : 2.3 x 1.7cm /0.9" x 0.67" (L*D).
The switch has the advantages of high sensitivity and durability. PP material is environmentally friendly and has excellent acid and alkali resistance..

【AUTO FLOAT SWITCH】Equipped with an automatic float switch. When the water level higher than the pump, the pump will start working automatically under the control of float switch. When the pump fails to pump water, it will automatically disconnected the power.If the water level is higher than the pump again,it will work again..
【POWERFUL SUMP PUMP】3040 GPH, 1/3 HP, Max Lift: 29 ft.
Acquaer submersible clean/dirty water pump moves up to 3040 gallons per hour rating tackles any draining job at a fraction of the time. Perfect for water supply, drainage in deep well, field irrigation garden irrigation and greenhouses..
【INGENIOUS DESIGN】The higher base plate and top suction design helps eliminate air locks and filters debris. For safety, the pump motor has an automatic thermal protector that will turn off the pump if it becomes too hot automatically. Once the thermal protector detects that the pump has cooled to a safe temperature, it will allow the pump to operate normally..
【HIGH-QUALITY MATERIALS】The submersible water pump is made of high-strength, corrosion-resistant reinforced thermoplastic materials. It will provide trouble-free service for a long time when properly installed..
【CUSTOMER SATISFYING GUARANTEE】 Acquaer sump pump comes....

Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring..
Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
No power use until pump is activated by internal float switch (when water level rises).
Built-in float switch! (No separate float switch is needed).

Large floats detect 1/4 in. water level rises, automatically activating the sump pump.
Second float provides additional protection to ensure automatic pump activation.
Protective float switch cage helps keep debris and wires from interfering with float movement.
vented, curved bottom reduces debris build-up under the float.
Allows the sump pump to run for an additional 10 seconds to drain excess water from the sump pit.

????Package includes 2 pcs W10195039 Dishwasher Float Switch.
????W10195039 switch replaces AP6016738, PS11750031, W10734532, WPW10195039.
????WPW10195039 switch works with the following brands: Whirlpool, KitchenAid, Kenmore, Maytag, Amana, Jenn-Air, Inglis..
????Float switch WPW10195039 shuts the water fill valve off if the water level gets too high before the timed fill cycle ends..
????MONEY-BACK GUARANTEE:For any product problem you’re not completely satisfied, you can ask for full refund..

Float valves use a rod and float ball attached to a valve shutoff lever to control.
Floating Ball Material: 304 Stainless Steel.
Designed with G1/2 inch thread that is normally used, can fit many pipe connection.
This float valve has a high-temperature rubber seal, durable to aging for long time use for better sealing and makes sure no leaking.
Widely used in magnetic level switch and liquid level measurements.

Used for 304 stainless steel water bowl, durable, no rust, no deformation, clean and sanitary.
The use of float water level floating principle control the inlet and outlet water switch, to achieve a constant water level effect, keeps enough water and always clean water.
Float valve for water trough horse cattle auto filter.
Significantly save more than 30% of the water when cattle drinking, reduce the sewage discharge pressure.
Automatic bowl tank horse dog cattle Water Leveler PVC Auto Fill Float Valve.

Balance pressure between piston and Valve, as well as smaller ball and shorter rod can bear high pressure..
Adjustable water level. Ball valve is used in pipelines to cut off, distribute and change the flow direction of the medium Widely used in magnetic level switch and liquid level measurements..
Made of 304 stainless steel. Its applicable medium is water, can withstand wide temperature of -10℃ to 120℃.
Stainless Steel Rod for Float Valve, 1/4" thread, 6.3" Length, and 4" Stainless Steel Float.
Works great for water trough, water pump, humidifier, fountain, aquarium, pond, chicken/dog/horse/cattle waterer, etc.