ReviewsFloat Level Switch Sensors

SEAFLO Non Automatic Bilge Pumps for Boats 2000 GPH 12V Boat Marine Plumbing Electric

Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring..
Outlet Diameter: 29mm/ 0.95 Inch (1-1/8").
Built-in float switch! (No separate float switch is needed).
Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
No power use until pump is activated by internal float switch (when water level rises).

Please see clearly the size and function of this product when you buy it. Thank you for buying! (If you have any questions about this product, welcome to email consultation, we will reply you within 24 hours!).
10W : 10W。 Max Switch Voltage : 100V DC.
Each Float Ball Size : 28 x 26mm/ 1.1" x 1"(D*H).
Package Content : 1 x Water Level Sensor.

Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..

Large floats detect 1/4 in. water level rises, automatically activating the sump pump.
Second float provides additional protection to ensure automatic pump activation.
Protective float switch cage helps keep debris and wires from interfering with float movement.
vented, curved bottom reduces debris build-up under the float.
Allows the sump pump to run for an additional 10 seconds to drain excess water from the sump pit.

Large floats detect 1/4 in. water level rises, automatically activating the sump pump.
Second float provides additional protection to ensure automatic pump activation.
Protective float switch cage helps keep debris and wires from interfering with float movement.
vented, curved bottom reduces debris build-up under the float.
Allows the sump pump to run for an additional 10 seconds to drain excess water from the sump pit.

Type: 2PCS M16 Water Level Sensor, Switching voltage (Max): 110V DC.
Float level switch is a kind of liquid level control device with simple structure, no external power supply, no complicated circuit, convenient to use. Has the advantage of smaller size and longer service life than mechanical switch..
Mainly used to sense the liquid level in a tank to turn on/off a pump, an indicator , an alarm or other device..
2 Way optional to install as normally closed/open switch according to your needs..
Suitable for hydroponics, saltwater , freshwater , gardening, aquariums for power control, pet bowls, fish tanks, filtration, heating etc..

Alarms/Notifies on High Water in Sump and Power Loss.
Text Messages and E-mails Alarm Notifications.
Two Inputs Offer Ability to Support Unlimited Amount of Sensors.
Optional Accessories Offer Leak Detection and Additional Float Switches. Level Sense Firmware now supports the following special characters in Wi-Fi Network name (SSID) and password: ! " # $ % & ' ( ) * + , - . / :.

Temperature Rating: -30~125 degree Centigrade.
Max Switching Current: 0.5A ； Max Contact Resistance : 100m ohm.
Float Ball Size(Approx) : 2.3 x 1.7cm /0.9" x 0.67" (L*D).
The switch has the advantages of high sensitivity and durability. PP material is environmentally friendly and has excellent acid and alkali resistance..

【AUTO FLOAT SWITCH】Equipped with an automatic float switch. When the water level higher than the pump, the pump will start working automatically under the control of float switch. When the pump fails to pump water, it will automatically disconnected the power.If the water level is higher than the pump again,it will work again..
【POWERFUL SUMP PUMP】3040 GPH, 1/3 HP, Max Lift: 29 ft.
Acquaer submersible clean/dirty water pump moves up to 3040 gallons per hour rating tackles any draining job at a fraction of the time. Perfect for water supply, drainage in deep well, field irrigation garden irrigation and greenhouses..
【INGENIOUS DESIGN】The higher base plate and top suction design helps eliminate air locks and filters debris. For safety, the pump motor has an automatic thermal protector that will turn off the pump if it becomes too hot automatically. Once the thermal protector detects that the pump has cooled to a safe temperature, it will allow the pump to operate normally..
【HIGH-QUALITY MATERIALS】The submersible water pump is made of high-strength, corrosion-resistant reinforced thermoplastic materials. It will provide trouble-free service for a long time when properly installed..
【CUSTOMER SATISFYING GUARANTEE】 Acquaer sump pump comes....

Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring..
Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
No power use until pump is activated by internal float switch (when water level rises).
Built-in float switch! (No separate float switch is needed).

Large floats detect 1/4 in. water level rises, automatically activating the sump pump.
Second float provides additional protection to ensure automatic pump activation.
Protective float switch cage helps keep debris and wires from interfering with float movement.
vented, curved bottom reduces debris build-up under the float.
Allows the sump pump to run for an additional 10 seconds to drain excess water from the sump pit.