ReviewsFloor Jack For Suv

AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack by fortifying your home structures with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
Check Stock

TUFFIOM Motorcycle Scissor Lift Jack w/ Rubber Top Surface & Safety Pin, Height Adjustable Steel Center Hoist Crank Stand for Motorcycle Repair Maintenance, 1100LBS Weight Capacity

  • Stable and Safe: This electric car jack must be used on a flat and firm ground. Remember never to use it on a sloped ground! The electric scissor jack is made from heavy-duty steel, and it has a triangular base to make it stable. To ensure maximum safety, this jack will automatically stop working when it reaches the height limit (16.5in)..
  • Best choice for Sedan and SUV (under 3T): This electric jack comes in different saddles for sedan and SUV. It's power by 12-volt cigarette-style outlet or car battery. Plug in the power cord ,and then the other end into the car jack.
  • Get Done in Minutes: It takes ONLY about 2 minutes to reach its maximum height and the improved electric impact wrench can remove or tighten lug nuts in 5 seconds only by pushing the switch..
  • Built-in Flashlight: The built-in flash LED light is super useful, especially for road emergencies when you need more visibility to keep yourself and others safe.If you have any other problems in use, please contact us in time to help you solve.
  • Portable Case: This electric car jack kit comes in a portable case, which mainly includes an electric car jack, an electric impact wrench, an inflatable pump, two sleeves (17/19 mm & 21/23 mm) and other accessories. Turn on the warning light as a reminder, par....
Check Stock

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock

Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Mini Screw Jack- Post 10\ to 13\

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock

ABN 5-½in Large Jack Pad Universal Fit Cross Slotted Frame Rail Protector

  • SAFELY LIFT YOUR VEHICLE WITHOUT DAMAGE: The ABN Large 5.5-Inch Pinch Weld Jack Pad Car Jack Puck 1-Pack is a floor jack pad that prevents the jack from exposing structural metal and is designed to protect the pinch welds, your vehicle under chassis, and overall frame so you can safely lift your vehicle at the proper jack points without scratching paint or causing metal-on-metal damage while using a hydraulic jack.
  • BUILT FOR SAFETY: This floor jack rubber pad is constructed from stiff rubber that cushions your car from damage and increases safety when secured properly.
  • Bottom side of slotted rubber jack pad includes textured grooves to ensure correct and safe fitment on jack without slippage.
  • USE YOUR JACK: Top side of car jack pad has slotted crosshairs to align with and protect side pinch welds while the bottom of the jack lift pad is also keyed with 4 recesses that fit onto 4-inch cup rim lugs on your jack to prevent the pad from spinning on the floor jack cup (cup and pad contact starts between these lugs).
  • LARGE SIZE: Fits beveled 5.5-inch steel lift cups bowl saddles on standard hydraulic floor jacks.
  • Floor jack saddle pad has 5.5-inch (14cm) top diameter and 4-inch (10.2cm) bottom diameter, 1.75-inch height (4.4cm), 4 slots have approx. 0.4-inch ....
Check Stock

Jack Boss Jack Pad Universal Large Floor Jack Rubber Pads Adapter Pinch,Weld Side Frame Rail Protector Puck/Pad (1 Pack)

  • 【Material&Function】Sturdy rubber jack pad is durable and non-deformable with long service life.Soft enough pad surface is to prevent frame rails and pinch welds from bending,and protect painted or coated chassis parts when using floor jack to lift the car.
  • 【Unique Groove Design】Center down groove design of floor jack adapter provide more cushion and crush resistance.The wider and deeper groove contact area than other rubber pads ，making groove aligns nicely insert weld.Fits snug at the base and sits very sturdy on the jack.Have greater security.
  • 【Size&Note】Jack pads diameter：4.17 inch.Thickness:1 inch.Groove width:0.7inch.Groove depth:0.23 inch.Maximum load bearing:3 Ton. 1*jack pad. Please measure floor jack's saddle size before purchase.
  • 【Universal Floor Jack Rubber Pad】Protector Puck/Pad fit most standard hydraulic floor jacks and vehicles.Easy to install and change.
  • 【Notes】If you have any question you can contact us，we will be the first time to solve for you.Our floor jack pads are tested for strict quality.
Check Stock

Skelang 2 Pcs Racing Jack Caster Wheel with 12mm Stem for 3 Ton Floor Jack

  • This jack caster is made of steel, durable and solid in construction.
  • The jack caster measures 2-3/8" in wheel diameter, 3-3/8" in mounting height.
  • stem size measures 12mm x 7/8" (Dia. x H).
  • Compatible with 3 ton rated floor jack with 12mm mounting holes (Please check the size before order).
  • Package includes jack casters, washers and nuts.
  • it's easy to screw the caster onto the floor jack.
  • It's great to replace old, worn or damaged casters on the floor jack, making the floor jack roll around with ease.
Check Stock

2 Ton Floor Jack Rubber pad Universal Floor Jack Puck Pads Floor Jack pad Adapter Pinch Weld Side Frame Rail ​Protector Puck for Floor Jack Stand

  • Floor Jack Rubber pad is Universal Floor Jack pad,Load Bearing: 2 Ton..
  • Floor Jack Rubber pad Fits most Jacks & vehicles,please verify dimensions Meet the conditions of use of your vehicle..
  • Floor Jack Rubber pad Design principle：.
  • 1. Use the rubber Jack pad as a buffer to avoid damage caused by direct contact between the jack and the chassis..
  • 2. The rubber Jack pad has a buffer function, the weight of the car and the gravity generated by the jack can be transferred to the rubber Jack pad, which will not cause damage to the vehicle chassis, and can protect the chassis from wear..
  • 3.Made from high quality rubber and slash cross slotted design which will provide more cushion crush resistance & non-slip..
  • Note: Since the rubber pad of the jack is made of rubber, there will be a slight smell of glue, please place it for ventilation before use..
Check Stock

GRADE Universal Floor Jack Rubber Pad Jack Pad Adapter Pinch Weld Side Frame Rail Protector Puck/Pad (1 Pack)

  • High Quality Floor Jack Pad:Made of heavy duty construction rubber material,MAXIMUM Load Bearing: 3 Ton.
  • Nice design Rubber Jack Pad:There is a slotted crossline on the top of the jack pads, which can align with the side clip weld and protect the side, so as to prevent the frame longitudinal beam from bending when lifting the vehicle with the jack.
  • Standard size:Universal Floor Jack Rubber Pad for most vehicles.please verify dimensions and ensure fitment to your vehicle.
  • Warm Tips: Because of floor jack rubber pad is newly factory production and heavy duty rubber material, so this jack rubber pad will has a little bit rubber smell, please put it in the ventilation room for some while! Please do not mind it.
  • 100 percent exchange or money refund- we are very sure that you will like our floor jack pad. Just contact us if not satisfied, we will be happy to help you and 100 percent replacement or full refund.
Check Stock

TCE AT82001U Torin Hydraulic Trolley Service/Floor Jack Combo with 2 Jack Stands 2 Ton 4,000 lb Capacity Blue

  • Hydraulic trolley service/floor jack combo includes (1) floor jack and (2) jack stands, providing you with the essentials to lift and support most....
  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/4" and a maximum height of 13-3/8".
  • Equipped with a safety bypass system prevents over-loading and ensures safe operation.
  • built-in carrying handle allows the floor jack to be lifted....
  • Jack stands feature an adjustable height that ranges from 10-13/16" to 16-9/16" with a 2 ton (4,000 lb) load capacity.
  • Each jack stand has a large saddle surface area for better contact with the load being supported.
  • A wide pyramid foot base provides added strength and....
Check Stock