ReviewsFloor Leveler For Plywood

GUTINNEEN Dog House Outdoor 100% Insulated, Heated Wooden Dog Kennel for Winter, Indoor Cat House Weatherproof-200% Thicker Than Normal Dog Crate（44.1" L）

【6 Sides Heat Insulation to Lock the Temperature】Optimal cold and heat protection for your dog through insulation on all walls, roof and floor, this insulated dog house suitable for all seasons..
【Fully Upgraded to 100% Roof Insulation】4 Layers perfect insulation through total 1.03" thick of roof, of which 0.12" thick of asphalt ,0.2" thick of plywood, 0.59" thick of Styrofoam,and 0.12" thick of plywood board..
【4 Walls & Floor Insulation Protection Against Moisture and Cold 】With 0.47" thick of wood, 0.6" thick of Styrofoam inside, and 0.12" thick of plywood.200% THICKER than un-heated dog kennels!.
【Well Thought Out】Aluminum door frame to prevent puppies from chewing on the kennel.Removable floor for easy cleaning.Adjustable feet balance on all types of surfaces for easy placement..
【All-round Protection】Openable sloping roof repels rain and snow, PVC door curtain and windshield door get away from wind & rain to keep the inside of the dog crate dry and ventilation.

Check Stock

Adjustable Leveling Feet Furniture Levelers Table Feet Heavy Duty Leg Levelers for Cabinets Sofa Tables Chairs,Support 1320LBs, T-Nut Kit 3/8”-16 Thread, Large Base- 4 Pack, Black

✔Heavy Duty & Large Furniture Leg Levelers- Allow easy leveling of furniture at home, office, restaurant, school or café, to match in same height. They allow raising your furniture, and help slide your furniture at ease !.
✔Adjustable Leveling Feet - 1.75” long steel insert with 3/8-16” thread.
Large Commercial Quality 1 3/8" Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability..
✔1320LBs Max Support- Commercial quality furniture levelers, T-nuts and thread insert are made of steel that support over 330LBs per feet, a set of four support furniture weight 1320LBs!.
✔For All Floors- Universal Nylon bottom that work for all floors such as hardwood/ tile/ carpeting floors. Comes with separate high density thick felt for hardwood floor to protect floor from scratches or harsh noises..
✔Easy Installation- For furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height. Or, pre-drill a 1/2” hole and insert the Locknut with mounting screws ,stabilize the leveler and adjust to the desired height. T-nuts and installation screws are included..

Check Stock

Heavy Duty Furniture Leveling Feet Adjustable Furniture Leg Levelers for Tables Chairs Cabinets Sofa Raiser, Support 1320LBs, T- Nut Kit 3/8”-16 Thread, Large Base,w/ 4 Felt Pads,12 Screws (4 Pack)

✔Heavy Duty & Large Furniture Leg Levelers- Allow easy leveling of furniture at home, office, restaurant, school or café, to match in same height. They allow raising your furniture, and help slide your furniture at ease !.
✔Adjustable Leveling Feet - 1.75” long steel insert with 3/8-16” thread.
Large Commercial Quality 1 3/8" Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability..
✔1320LBs Max Support- Commercial quality furniture levelers, T-nuts and thread insert are made of steel that support over 330LBs per feet, a set of four support furniture weight 1320LBs!.
✔For All Floors- Universal Nylon bottom that work for all floors such as hardwood/tile/carpeting floors. Comes with separate high density thick felt for hardwood floor to protect floor from scratches or harsh noises..
✔Easy Installation- For furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height. Or, pre-drill a 1/2” hole and insert the Locknut with mounting screws ,stabilize the leveler and adjust to the desired height..

Check Stock

Heavy Duty Adjustable Furniture Leg Leveler w/Lock Hexagon Nuts - 2000 Lbs(Set of 4)

Heavy duty-Set of four levelers can holds Up to 2000 Lbs. Leveler Total Height: 3 Inches.Leg Base Diameter: 1-1/4 Inches.2 Inches Height Adjustable..
Free spinning foot - inner hexagon spanner for adjust ,Compensates for irregular floors. base with plastic protective cap can protects floors and block any moisture from getting to the foot. No more rust spots left on the floor surface..
Multipurpose-It is good for tables, shelving units, cabinets, furniture legs and a whole lot more.And also can be used for outside furniture and perfect for the workshop or garage, especially if vibrating machinery is involved..
Easy to adjust- adjust with the included-inner Hex Key Wrench. The unique design of the leg leveler allows for easier access to the adjustment bolt. This will be allows to micro adjust each leg until they are perfectly level to your desired height..
You can get 4 Heavy Duty Leg levelers w/lock nuts, 32 Installation screws, one 5mm inner hexagon spanner..

Check Stock

Johnson Level & Tool 1610-2400 Eco-Tech Bamboo Level, 24\

ROBUST LEVELER: A perfect pick for the professionals at work, this leveler features bamboo construction with aluminum gauging edges that promise high durability..
ACCURATE RESULTS: The EcoTech leveler has an EZ clean coating that resists mortar adhesion for unparalleled performance..
SMART DESIGN: The bamboo leveler has curved vials that support extra-smooth bubble travel for accurate readings..
HIGHLY DURABLE: The wood leveler has unbreakable vial windows that add to its lifespan, resisting the abrasive outdoor impacts..
IDEAL APPLICATIONS: The 24 in. Eco-Tech Bamboo Level is ideal for masonry work..

Check Stock

Antrader 4-Pack Minimalist Design Furniture Feet Metal Sofa Cupboard Cabinet Leg Replacement Parts, Black

【Package Includes】- The leg leveler kit includes 8pcs leg levelers, 32 screws, 2 allen wrenches and 2 nut wrenches. It is the best way to quickly and easily fixing the level of all types of furniture..
【Adjustable Leveling Feet】- The adjustable height is 0-2 inches, which can meet your various needs. In addition, the base with a plastic protective cover can protect the floor and prevent moisture from entering the feet..
【Premium Quality】- Our heavy duty furniture leg leveler is made of 2mm galvanized steel, which is rust-proof and durable. Each one can support 330 lbs, and 8 leg levelers can support a total of 2640 lbs..
【Easy to Install】 - You can use the screws to install the leg levelers in a few minutes, and the allen wrench and nut wrench helps to adjust the height effortlessly..
【Wide Application】- It is widely used for leveling heavy furniture, suitable for shelving units, cabinets, furniture feet, workbenches, cabinets, beds and bookcases, and can also be used outdoors..

Check Stock

Wilton Adjustable Cake Leveler for Leveling and Torting 12 x 6.25-Inch

READY, SET, BAKE: This Wilton adjustable cake leveler is the quick and easy way to create even cake layers, consistent in height. The sturdy....
CONVENIENT: Measure the height you need on the Wilton cake leveler, starting from the feet up.
position wire into notches at desired height.
PERFORMANCE: The plastic feet on the Wilton cake leveler provide stability to keep an even cut all the way through, making this small leveler perfect....
CARE INSTRUCTIONS: This Wilton cake leveler is dishwasher safe.
however for best results, wash in warm, soapy water before first and after each use.
INCLUDES: 1 cake leveler, dimensions: 12 in (30.4 cm) wide and 6.25 in (15.8 cm) high.

Check Stock

Tile Leveling System 3/16\ - Professional and DIY - Includes 800-Pieces Tile Leveling Clips for Secure Floor and Wall Setting - Easy to Use Tiling Installation Tools - (4,0 mm)

【INCLUDE】Our set includes 200pcs tile leveler, 500pcs cross-shaped tile spacers and 4pcs special wrenches..
【EASY TO USE】The tile leveling system are great tools for floor and wall setting. Just insert the steel needle along the gap of the tile, after rotating 90 degrees, use the special wrench to rotate the black cover to keep the tiles at the same level. And you can use the tile spacers to adjust the spacing between tiles. Wait 4-6 hours, take out the tile leveler before the cement is dry..
【WIDE APPLICATION AND LARGER QUANTITY】The tile leveler is suitable for tile gap between 2 to 6mm, and it is suitable for tiles with a thickness of 5mm to 16mm..
【PERFECT TILE LEVELING SYSTEM】Our tile levelers are more accurate than those with replaceable steel pins. The steel needle is not easy to loosen, improving the flatness of tile laying. And you can use the 2mm cross-shaped tile spacer in the set to keep the gap between the tiles uniform..
【REUSABLE AND DURABLE】The tile leveling system is reusable and durable. It is easy enough to remove with special wrench. The tile spacers made of thermoplastic PP material, then the main body is smooth and durable surface. The steel needle made of manganese steel, greatly reducing the probability of break....

Check Stock

Johnson Level & Tool 575 Structo-Cast Line Level, 3\

DURABLE LEVELER: Boasting a heavy-duty Structo-Cast construction for unparalleled performance, the leveler has a durable impact-resistant vial for optimum results effortlessly..
PRECISE DESIGN: The surface leveler features a smart design that reduces the line sag, providing accurate readings every time..
HIGHLY FUNCTIONAL: The lightweight leveler has unrestricted hooks for easy movement on the line, making it conveniently accessible for you..
IDEAL APPLICATION: The heavy-duty leveler is ideal to use for masonry, landscape, and sheet metal work..
PRODUCT SPECIFICATIONS: The 3 in. line level is proudly made in the USA..
Returns will not be honored on this closeout item.

Check Stock

OwnMy Heavy Duty Adjustable Leveling Feet Hexagon Nuts Lock Furniture Legs Levelers for Furniture, Table, Cabinets, Workbench, Shelving Units and More

Heavy Duty adjustable leveler feet can level your uneven floor or furniture easily. Let's get rid of a wobbly table. Can adjust level in your need to avoid furniture be corrode in damp.
More Stability -The lip on the bottom design so the weight can be scattered, helps with the overall support isn't bearing totally on the screw connections.
With black rubber feet caps for grip, keep it solidly in place and not to damage your flooring, also protect from moisture. each leveler has a load-bearing capacity of 2000 pounds.
Perfect for cabinets, tables, workbench, support table or shelving units for a busy work area or garage, etc. Package includes: 4 x furniture feet, 16 x Screw, 1 x hex wrench, 1 x open-end wrench..
Dimension:M10 Thread, adjusts height from 0" to 2" feet caps Diameter:34mm.

Check Stock

Adjustable Feet Levelers, Heavy Duty Adjustable Legs for Furniture, Large Furniture Levelers, T Nut Levelers Table Adjustable Feet 3/8-16 Thread (8 Pack, Black)

{Wide Application}: The leveling feet adjustable can be used on any furniture leg to help it level the same height, such as tables, chairs, kitchen cabinets, and sofas. No matter at home or workplace that needs to be leveled or adjusted, it can be quickly solved by this furniture leveler..
{Flexible Adjustment}: The heavy-duty furniture leg levelers help to adjust the height of the furniture without affecting the appearance, so as to adjust the balance or increase the height. Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability. The 3mm thickness felt pad with heavy-duty self-adhesive perfectly protects the floor..
{Clever Installation}: First drill a hole with a width of 0.55 inches, use a hammer to hammer in the inserted t-nut, and then screw the leg leveler to the desired position to complete the adjustment. And for furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height..
{Package Included}: 8 × T- Nut Kit, 3/8”-16 Thread. 8 × 0.1'' thickness Felt Pads. adjustable furniture feet.

Check Stock