ReviewsFlowing Big Block Chevy Exhaust Manifolds

1965-72 Compatible/Replacement for Chevy Big Block 396-427-454 Short OEM Style (Recessed Corner) Steel Valve Covers - Chrome

  • Chevy Big block OEM style chrome steel valve covers fit 1965-72 Chevy 396-427-454 big block engines..
  • Driver side has a recessed corner for corvettes or cars with power brakes..
Check Stock

Flowtech 10010FLT Block Hugger Toob

  • Offers a universal installation solution for all small block Chevy V-8 applications.
  • Designed to connect Block Huggers to existing exhaust systems.
  • Built from thick, heavy-duty 16-gauge mandrel-bent tubing.
Check Stock

Moroso 62205 Oil Pump Primer for Small and Big Block Chevy

  • Small Block Chevy, Big Block Chevy, and 90� V6 engines.
  • This oil pump primer offers a superior design.
  • Includes bushing to pressurize the valvetrain.
  • Primes the oil pump right through the distributor hole using an electric drill.
Check Stock

Speedmaster PCE407.1007 4-Leg Engine Storage Cradle Stand with Casters

  • Red Powder-Coated Finish These Procomp Electronics engine stands are constructed from high-quality steel tubing, the mount brackets are 1/4 inch steel....
Check Stock

NEW RAM 11" CLUTCH & BELLHOUSING KIT WITH GM 621 3899621 ALUMINUM BELLHOUSING, FLYWHEEL INSPECTION COVER, CLUTCH FORK BOOT & CLUTCH PIVOT BALL, PRESSURE PLATE, 26 SPLINE DISC, FLYWHEEL, SBC BBC CHEVY

  • ...55, 901180) > Fits transmissions with 1 5/32"-26 spline input shafts and Chevy engines with a 2 piece rear main seal.
  • The Southwest Speed 11" Performance Cast Aluminum Bellhousing is a reproduction of the original 3899621 bellhousing used on GM models with Big Block and Small Block engines > This performance aluminum bellhousing does not have the GM Part # 3899621 casting number but will look, fit, and perform just like original > If you are doing a restoration of an early muscle car, or just want the correct bellhousing to finish that rod project, this bellhousing is the perfect part.
  • Fits: > 1964-1988 Chevy Chevelle, Malibu, Monte Carlo* > 1959-1987 Chevy El Camino* > 1959-1988 Chevy Impala, Caprice, Bel Air, Biscayne, Brookwood, Kingswood, Nomad, Sedan Delivery* > 1963-1981 Chevy Corvette* > 1967-1981 Chevy Camaro* > 1968-1974 Chevy II, Nova* > *With Manual Transmissions and 168 tooth Flywheel > The bellhousing was used with 4 speed transmissions in 66-72 Chevelle, 66-81 Corvette, 67-72 Camaro, 68-72 Nova, and 64-81 Impala.
  • This new Chevy high performance 11" aluminum bellh....
Check Stock

J-B Weld ExhaustWeld 2\ x 72\ Repair Wrap

  • J-B WELD EXHAUSTWELD: A high strength fiberglass wrap, impregnated with a specially formulated resin for high temperature resistant repairs. ExhaustWeld can resist up to 1100°F once it is fully cured!.
  • CURE AND SET TIME: ExhaustWeld can cure with or without heat! It will cure within 20 minutes if heat is applied to it with either a heat gun or by letting the engine run. Without heat, ExhaustWeld will set in 20 minutes and cure in 2 hours..
  • HIGH HEAT RESISTANCE: Once fully cured, J-B Weld ExhaustWeld Exhaust System Repair Wrap has a temperature resistance of 1100°F, allowing it to be used on every part of the exhaust system!.
  • APPLICATIONS: Manifolds, Catalytic Converters, Mufflers, Tailpipes and more!.
  • EVERYTHING YOU NEED: The kit includes a pair of gloves and a .5" x 24" piece of aluminum tape!.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-1/4 inch width x 1-5/8 inch height Oval Port.
  • Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Chevrolet SBC/BBC Universal Aluminum Radiator, 31 Inch Wide

  • A professional quality, lightweight, all-aluminum racing radiator available at any budget.
  • Furnace-brazed construction is more durable and improves performance vs. epoxy and gasket construction.
  • Two-rows of 1” aluminum tubes cool better than 5 rows of traditional copper tubes.
  • Single-pass, cross-flow design with 2.25” core.
  • Traditional Small Block Chevy/Big Block Chevy 1.5” driver side upper inlet, and 1.75” passenger side lower outlet.
Check Stock

Holley 550-511K EFI Self-Tuning Master Kit

  • Breathe new life into your Small Block Chevy or Big Block Chevy engine with this easy-to-install fuel injection/distributor ignition kit.
  • Throttle body mounted ECU – no extra computers to mount or relocate.
  • Self tuning ECU means you don’t have to be a computer/tuning expert to enjoy EFI.
  • Precision machined shutter wheel designed for improved accuracy at extreme engine RPM.
Check Stock

4-way 5/16" Barb CO2 Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

The Weekend Brewer 8-way 5/16" Barb CO2 Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock