ReviewsFluid Connect

Hotwin 9.49mm SAE 5/16' 8mm Nylon Fuel Line Quick Connect Release Hose Disconnect Hose

▶Fuel Line Quick Connect / Disconnect for Fuel / Gas and other common fluid types..
▶Nylon Hose to ID=5/16" (8mm) Rubber Hose..
▶Part number: 9.49mm SAE Fuel Line Connect..
▶Please check the part number and pictures to verify this is the part you need..
▶Package included: 9.49mm SAE 5/16" 8mm Nylon Fuel Line Quick Connect Release Hose.

Check Stock

CATUDIY Automotive Brake Bleeder Kit with Fluid Transfer Pump, Brake Fluid Oil Extractor for Cars Electric Brake System Bleeding Tools with Master Cylinder Adapter Pressure Adjustable 0.6~3bar 110V

⛽【Easy & Time-Saving】This brake pressure bleeder tool is very simple to use and can be operated by one person. There are 4 pumps that can change the brake oil in the meantime. Because of its built-in working pressure bleeder pump, you don’t need to connect extra break bleeder vacuum pump kit.
⛽【2 Power Supply Modes】The brake bleeder kit one person supports 2 power modes: 12V batteries & 110V/220V power outlet, which allows you to exchange brake fluid any time and anywhere - An essential auto tool for personal owner garage or repair stores.
⛽【Standard & Master Modes】The brake fluid exchanger is available in Standard and Master modes. Please select either mode before starting the fluid exchange (Standard Mode Pressure: 0-2.5 bar.

Check Stock

OEMTOOLS 24936 8 Quarts (2 Gallons) Manual Fluid Extractor, Oil Extractor Pump, Automotive Fluid Extractor for Various Oils and Fluids, Oil Pump Extractor

All-Access Pass: Reach the reservoir in any vehicle with this fluid extractor.
Its 5 foot flex hose uses quick connect design to extend your reach by more than 8 feet.
Removing oil or other fluids with an oil extraction pump is more convenient and less hazardous than working on your back under heavy machinery.
Feel the Difference: The oversized oil extractor manual pump handle is comfortable and keeps things moving.
Extract low viscosity fluid such as water or coolant with ease.
Keep It Clean: Never scramble to reposition a drain pan again.
Avoid messes with the helpful overflow shutoff valve, causing the suction of the pump to stop upon reaching capacity.
Product Details: This hand pump extractor measures 23 inches by 8-1/8 inches with a 2.1 gallon 8 Liter capacity.
Includes a 5 foot quick connect flex hose and a pair of 41 inch dipstick hose adapters.

Check Stock

Hotwin Nylon Fuel Line Quick Connect Release Disconnect Hose 6.30mm SAE1/4' 6mm

▶Condition: Brand new and high quality Quick Connect Release Disconnect Hose 6.30mm SAE1/4" 6mm..
▶Connect the fuel lines by pushing-in and disconnect by simply pulling out while pressing the lock buttons.
▶It is made of quality nylon material compatible with fuel/gas, and other common fluid types. Allows you to quickly connect the fuel lines, very convenient..
▶Package Included: 1 x Quick Connector Straight, 1 x Quick Connector Male.

Check Stock

JoyFans 10L Pneumatic Transmission Fluid Pump Extractor and Dispenser, Gearbox Oil Transfer System Refill Fill Evacuator Tool Kit with 15PCS ATF Adapters for Most Garage Shop Vehicles

Don't even need to pour oil manually! You only need to switch the extract or dispense mode and buckle the self-locking device. Large capacity avoids the trouble of repeated refueling and satisfys refueling needs of multiple vehicles at once. Quick and sparkless..
3PCS 1M Hoses: O.D. 6mm 8mm 10mm. Connect both ends of the 80'' hose with quick coupling to pump and the selected nylon hose first. They make the pump more suitable for various makes and models. The blue knob must be consistent with the air control switch valve: Extract or Dispense. The 1M nylon hose can be inserted into the car oil container or dipstick hole directly to extract waste oil for recycle and dispense the new oil for refilling. No need to jack up the vehicle and crawl under it.
ATF Adapters: There are 15 specific ATF adapters included in this pneumatic ATF fluid pump kit, installed on the car oil pan and perform transmission fluid refill service for the ATF filler system. Multiple adapters constructed from hardened steel for maximum strength and longevity. Black electrophoretic finish for rust and corrosion resistance. Kit is suitable for Ford, BMW, Nissan, VW, Audi, Toyota, Volvo, Porsche, Benz, Hyundai, Infiniti, Lexus and etc..

Check Stock

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..

Check Stock

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

Easier to use and less messy than an inconvenient hand pump.
EASY TO USE: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
90 to 120 PSI (6-8 bar) air supply requirement.
25-ounce (0.75L) approximate refill container capacity.
Includes different adapter sizes to accurately fit your application.
CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.

Check Stock

HFS-25 1\/dn25 Flow Switch,Liquid Water Flow Paddle Control Switch SPDT Contacts 6-380V

This flow switch is made of high quality stainless steel, corrosion resistant and long service life..
This product is used to measure the fluid dynamics of fluids passing through pipes, such as water, ethylene diluents, glycols and other liquids that do not corrode copper..
This water flow switch is suitable for water treatment systems, central air conditioning, water cooling units, fire protection systems and other fields..
Flow switches are typically used in locations that require interlocking or "cut" protection..
When the flow exceeds the set value, the fluid drives the blade and the microswitch, and the SPDT contact can connect the circuit and disconnect other circuits..

Check Stock

Koauto 6.30mm SAE1/4'6mm Nylon Fuel Line Quick Connect Release Hose Disconnect Hose

▷ Fuel Line Hose Coupler Quick Release Connect Connector.
▷ Good quality material nylon compatible with fuel/gas and other common fluid types, it is durable, long life for use.
▷ Easy installation: The end of barb connects with fuel pipeline or hose, time saving and good efficiency.
▷ Connect the fuel line pull out simply for disconnect while pressing the lock button..

Check Stock

Oil Transfer Pump Extractor, Electric Oil Pump Fast Oil Change Transmission Fluid Extractor Pump, 12v 60w Diesel Fluid Scavenge Suction Pump for Changing Oil, Boat, Tubes, Truck, RV, ATV, Riding Mower

POWERFUL SUCTION OIL FUNCTION- This high efficient battery powered oil extractor pump is easy to pump various fluids and oils. Easy to put together, all the hoses came with it. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery, ran the small hose down the dipstick tube and turned it on, and press the button. Simple On/Off Power Switch, easy to use. Great for a quick oil change..
DIFFICULT OIL EXTRACTION NO MORE - The 12v Oil Change pump extractor are very easy to use and makes a top down oil change so easy. Ideal diesel fluid oil transfer pump extraction equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore..
LITTLE PUMP, BIG WORKER - Best oil extractor, Extracting motor oil from your vehicle without mess & specialized tools extract the oil from your car, Motorcycle, Scooter, Marine, Quad Bike, Truck, boats inboard engine, outboard motor, Forklift, home Generator, Tractor, riding mower, lawn tractor, snowmower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, ....

Check Stock

SPDT Thread Paddle Type R3/4 Liquid Water Oil Flow Sensor Switch Automatic Control 15A 250V HFS-20

Extensive Use ---This flow switch is an automatic element that controls flow in pipes, which can be used on water treatment system, central air-conditioning, water cooled chiller and relative industries.
Subject Range --- Applicable fluid includes water, ethylene glycol, oil or other liquid not classified as hazardous or corrosive and air.
Good Performance --- Flow control value is adjustable, repeat action point is stable.
Automatic Control --- When flow rate exceeds set value, fluid drives blade and micro switch, the SPDT contact can connect a circuit and disconnect other circuit.
Good Durability --- Protection grade is IP54.
the contactor life is up to 100,000 times.

Check Stock