ReviewsFluid Transfer Pumps

Genuine Ford Fluid XL-12 Transfer Case Fluid - 1 Quart , black

  • Transfer case fluid is recommended by Ford Motor Company for use in transfer cases driving front axles on Ford, Lincoln and Mercury AWD/4X4 vehicles.
  • For use in transfer cases where MERCON ATF was previously recommended.
  • do not use in AWD vehicles equipped with a transaxle.
  • Do not use in automatic transmissions, manual transmissions, power take off units (PTU) or fluid couplers.
  • Do not use in torque on demand transfer cases.
  • Check owner guide and transmission fluid charts for application.
Check Stock

Fuel Transfer Hose 3/4 Inch Fuel Hose 20 Feet,Farm Fuel Transfer Hose with Fittings,for transferring Diesel, Kerosene & Gasoline - Fuel Tank Hose for Fuel Transfer Pumps by BOOTOP PIN

  • 3/4 Inch NPT x 20 Feet Anti-Static Replacement Fuel Hose for Fuel Transfer Pumps For Dispensing Diesel, Kerosene & Gasoline.3/4 Fuel Transfer Hose With End connections..
  • Fuel transfer pump hose Designed for use with all electric pumps..
  • This Transfer tank hose include a 3/4 Inch NPT End connection and a 1 inch NPT threaded fitting at the other end..
  • 3/4 Fuel hose, 1 diesel fuel hose, gasoline pump hose, gas tank hose,Suitable for all Fuel Transfer Pumps for FPM-12, FPM-24, FPM-115 & FPM-220 models..
  • Feel free to contact us if you have any problems. If you are not satisfied with our products,we accept all of the return,replacement or refund requests..
Check Stock

Lamerto 2.2 12V DEF Pump Urea Pump 4387304RX Replacement for Cumm-ins ISX ISB ISC Denoxtronic Diesel Exhaust Fluid Pump #A028Y792 2871879-RX

  • Cumm-ins ISC Series, with Denoxtronic 2.2 Control Unit Doser Pump.
  • Diesel Exhaust Fluid (DEF) Urea Pump systems are designed to safely and effectively transfer DEF fluid from a tank to diesel equipment, helping facilities comply with strict NOx emission regulations..
  • Urea pump provides a stable and flow rate for the urea system. In addition of providing stable pressure and flow, it also has heating and venting functions. If the urea pump fails, the power output will be limited, the urea solution will not be injected into the exhaust. This will affect the car performance..
  • Our urea pump is a drive unitl that provides a stable and flow rate for the urea system.In addition of providing stable pressure and flow,it also has heating and venting functions?Make noise and current consumption very low and 20% higher efficiency than conventional fuel pumps..
Check Stock

OEMTOOLS 25443 Extraction and Filling Pump, Brake Fluid Vacuum Pump Tool for Power Steering and Brake Fluid Reservoir, Garage & Shop Fluid Evacuators

  • SIMPLE BRAKE FLUID EXTRACTOR: Leave the turkey baster in the kitchen and easily extract automotive fluid in moments.
  • The plunger seal draws fluid out of the reservoir smoothly, eliminating messes with one manual fluid transfer pump.
  • FULL DISCLOSURE: Dual scale molded into the body of the fluid evacuator to measure liquid in quarts and milliliters.
  • Clear durable plastic body makes it easy to see how much fluid the syringe extractor collects as well as quality and condition.
  • LOW MAINTENANCE: The body of the fluid transfer pump disassembles into its components, making it easy to clean the cylinder, change the gaskets on the plunger, or otherwise service your fluid pump automotive tool.
  • REACH ANY RESERVOIR: Fluid evacuator pump comes with two connecting tubes that can extend the length of the brake fluid extractor pump from 11” all the way to 26”, so you can access any hard-to-reach filler neck or reservoir.
  • PRODUCT DETAILS: Maximum fluid extractor automotive capacity reaches 200 mL.
  • Includes (2) 7.5” car fluid pump extension tubes with cap locks.
Check Stock

TERA PUMP 2X More Powerful Rechargeable Battery Liquid Transfer Pump [ Up to 20% Faster Flow, 10.8 Liter per Minute] Precise Nozzle Extra Long 3 Meter Hose for Gas, Diesel, Kerosene and more

  • 20% More Powerful Transfer Rates of up to 2.85 Gallons per Minute or 10.8 Liters per Minute - Telescopic Suction Tube of 15 to 20 inch for Gas Cans, Pail Pump and Small Drums.
  • There are millions of wasted Micro-B cables in the world. To help reduce E-Waste & carbon emissions, no Micro-B Cable is included in our product..
  • TERA PUMPs First Rechargeable Fuel Transfer Pump, 2900 mAH Lithium-Ion Battery - Full Charge within 5 hours or less.
  • 10ft / 120 inch Flexible Discharge Hose with 11.5 inch Gas Pump Style Nozzle provides flexibility to Fuel from greater distances with Gasoline, Diesel, DEF (AdBlue), Non-Potable Water, Kerosene, Antifreeze, Windshiled Washer Fluid, Mild Detergents, Agricultural Chemicals & Light Oils.
  • Flow Nozzle provides greater control - Simply squeeze the Nozzle or Twist Clockwise for Longer Fueling Sessions - Tera Pump products are made to be versitile, strong and backed by a 1 Year Warranty on Defects.
Check Stock

Mini Micro Water Priming Gear Pump Dc 3-12v Sinking Pump Waterproof A1

  • GOLD MEDAL PERFORMANCE: The M-150S fuel transfer pump is independent lab tested and has received the Gold Medal Performance Award for delivering three times more operating hours than our leading competitor's comparable pump..
  • DURABLE ALUMINUM HOUSING: Manufactured from high-quality diecast aluminum, our fuel transfer pump is extremely dependable and lightweight and will put minimal stress on your tank bung. The aluminum housing is rugged and corrosion-resistant to withstand years of work in any application..
  • ROTARY GEAR DESIGN: The rotary gear pump is engineered with fewer moving parts, which means less friction and wear on its components. Thus this rotary gear pump will have fewer needed repairs and longer life than a rotary vane pump. When you need reliable performance GPI’s gear pumps are over engineered to deliver..
  • EASY-TO-USE: The 12-VDC motor of our fuel transfer pumps is highly efficient as it delivers gasoline, diesel fuel, ethanol blends, and kerosene at flow rates up to 15GPM. This economy pump comes with the standard nozzle cover and is ideal for applications where accessories are already available. Pump only for direct fuel tank mounting..
  • 2-YEAR WARRANTY: Our M-150S GPI fuel transfer pumps come with a 2-year warranty and are UL Liste....
Check Stock

TERA PUMP Electric Multipurpose Gas Transfer Pump with Quick Stop Nozzle for Gas, Diesel, DEF & More

  • [ TRANSFER RATES ] Transfers up to 2.5 Gallons per Minute with Flow Control Nozzle. Control the flow by squeezing the nozzle lever, Lower Level Tigger Position is great for refueling gas, diesel and more & Upper lever trigger position is great for watering sessions. Nozzle can also be locked for longer watering or fueling sessions.
  • [ RECOMMENDED ] Suitable for Gasoline, diesel, DEF (AdBlue), non-potable water, kerosene, antifreeze, windshield washer fluid, mild detergents, agricultural chemicals & light oils - Discharge Hose of 39.4-inch for refueling for farther distances - Discharge Hose Holder: Built-in nozzle holder for safe and convenient way of storing the discharge nozzle.
  • [ SUCTION TUBE ] Suction Tube length of about 15-inch, Fits 3-Gallon (~11.4-Liters) Gas Cans, 5-Gallon (~19-Liters) Gas Can or up to 5-Gallon Pails - Suction end Outer Diameter: 1-inch - Swivel Nut Nozzle prevents hose from tangling with 360 degree rotation.
  • [ BATTERY POWERED ] Powered with Two (D) Battery Powered, Sold Separately - Big Slide Switch: Big On/Off Switch - Works great with farm equipment, Industrial Vehicles and in Automotive ....
Check Stock

GPI M-150S Fuel Transfer Pump, Automatic Shut-Off Nozzle, 15 GPM Fuel Pump, 12' Hose, Power Cord, Spin Collar, Adjustable Suction Pipe (110000-100)

  • GOLD MEDAL PERFORMANCE: The M-150S fuel transfer pump is independent lab tested and has received the Gold Medal Performance Award for delivering three times more operating hours than our leading competitor's comparable pump..
  • DURABLE ALUMINUM HOUSING: Manufactured from high-quality diecast aluminum, our fuel transfer pump with automatic shut-off nozzle is extremely dependable and lightweight and will put minimal stress on your tank bung. The aluminum housing is rugged and corrosion-resistant to withstand years of work in any application..
  • ROTARY GEAR DESIGN: The rotary gear pump is engineered with fewer moving parts, which means less friction and wear on its components. Thus this rotary gear pump will have fewer needed repairs and longer life than a rotary vane pump. When you need reliable performance GPI’s gear pumps are over engineered to deliver..
  • EASY-TO-USE: The 12-VDC motor of our fuel transfer pumps is highly efficient as it delivers gasoline, diesel fuel, ethanol blends, and kerosene at flow rates up to 15GPM. Additionally, the innovative spin collar design of our fuel transfer pump makes installation fast an....
Check Stock

zMAX 58-011 - Engine & Fuel Formula Kit - Easy to Use - Reduces Carbon Build-Up & Lubricates Metal Extending Life of Car or Truck - Runs Efficiently, Improving Gas or Diesel Mileage - 12 oz. - 2 Pack

  • Clean fuel is essential to the health and performance of your equipment..
  • 2 micron Bio-Tek filtration removes water, rust, dirt and dust that can damage your equipment for fuel transfer pumps up to 40 GPM..
  • Spin-on design and pre-lubed gaskets makes filter changes easy. This filter has 1 1/2 - 16 UNF threads..
  • Designed for fuel transfer pumps, fuel dispensers, and gravity flow applications. For use with gasoline, E15, kerosene, diesel, and biodiesel. Not for use with aviation fuel..
  • GPI Genuine Parts & Accessories are tested and approved for use with GPI fuel transfer pumps and are backed by a 90 day limited manufacturer’s warranty..
Check Stock

GPI M-180S Fuel Transfer Pump, 18 GPM, 12-VDC, Automatic Shut-Off Nozzle, 12' Hose, 18' Power Cord, Adjustable Suction Pipe (110300-2)

  • ...hus, this rotary gear pump will have fewer needed repairs and longer life than a rotary vane pump. More operating hours means longer pump life and greater value. When you need reliable performance, GPI’s gear pumps are over-engineered to deliver..
  • DURABLE: Manufactured from high-quality die-cast aluminum, our fuel transfer pump with automatic shut-off nozzle is extremely dependable and lightweight and will put minimal stress on your tank bung. The aluminum housing is rugged and corrosion-resistant to withstand years of work in any application..
  • EASY-TO-USE: The 12-VDC motor of our fuel transfer pumps is highly efficient as it delivers gasoline, diesel fuel, ethanol blends, and kerosene at flow rates up to 18 Gallons per Minute..
  • QUICK INSTALLATION: The innovative spin collar design of our fuel transfer pump makes installation fast and easy! The low-profile design of the pump is meant for permanent mounting on fuel storage tanks..
  • 2-YEAR WARRANTY: GPI’s M-180S fuel transfer pumps come with a 2-year warranty and are UL Listed Motor and CSA Certified. Feel confident in knowing that your American-made fuel pump has been providing longer pump life and greater value..
Check Stock

GPI - EZ-8 12v Fuel Transfer Pump, Manual Shut-Off Nozzle, 8 GPM Fuel Pump, 10' Hose, Power Cord, Adjustable Suction Pipe (137100-01)

  • DURABLE ALUMINUM HOUSING: Manufactured from high-quality diecast aluminum, our 12 volt transfer pump with manual shut-off unleaded nozzle is extremely dependable and lightweight and will put minimal stress on your tank bung. The aluminum housing is rugged and corrosion-resistant to withstand years of work in any application..
  • QUICK-INSTALLATION: The EZ-8 GPI fuel transfer pump 12 volt has easy installation and direct tank mounting. The design of the pump is meant for permanent mounting on fuel storage tanks..
  • ROTARY GEAR DESIGN: The rotary gear is engineered with fewer moving parts, which means less friction and wear on its components. Thus this rotary gear will have fewer needed repairs and longer life than a rotary vane pump. When you need reliable performance GPI’s gear pumps are over engineered to deliver..
  • EASY-TO-USE: The 12-VDC motor of our fuel transfer pumps is highly efficient as it delivers gasoline, diesel fuel, ethanol blends, and kerosene at flow rates up to 8GPM. This model’s compact design allows for easy installation and versatile pump mounting..
  • 2 YEAR WARRANTY: GPI EZ-8 fuel transfer pumps come with a 2-year warranty and are Motor U.L. Listed to U.S. and Canadian Standards. The EZ-8 has a low-maintenance design and is ideal for on ....
Check Stock