ReviewsFlush Cut Saws

Lackmond SG20SPL1421 SPL Series Dry Cut Diamond Blade for Cured Concrete 20-Inch by .140 by 1-Inch

Dry cut diamond blade for cutting cured concrete outside 48 hours old.
Bonded and designed for use on wall saws, air saws and low horsepower walk behind saws.
Pre and post-tensioned steel core to eliminate loss of tension and "run-out" during cutting conditions.
Delivers excellent speed of cut while maximizing longevity.

JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cuts through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge..
JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts..
MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years..
DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your life!.

Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick.
For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 4,000.
Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood..
Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required..
3.0 mm kerf design, ATB Grind & 15Degree hook.

For fast rip cuts on soft/hardwood thanks to the thin kerf design..
To be used on radial arm saws, miter saws, table saws for cutting soft/hardwood. Good on plywood..
0.098 kerf thickness, 0.071 plate thickness, 20° Hook Angle, 1 Flat + 2/15° alternate teeth Grind..
Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
Laser-cut plate features expansion slots to reduce noise and anti-vibration design..

High quality and professional grade for ripping and crosscu tting of thick hardwood to 3-1/2" thick and softwood to 1" thick..
The blades can be used on Circular Saws, Table Saws, Miter Saws, Hand Saws and Chop Saws..
Ideal for cutting hardwood, softwood, exotic wood and abrasive wood..
Thin kerf allwos a smooth finish with minimum waste. Lower hood angle improves the surface quality of the cut and increases the feed pressure..

New vibration dampening system featuring TENRYU resin filled laser cut body slots.
Meticulous, hand hammer plate tensioning for a flatter blade and truer cuts.
Unique ATAF Shear face grind for Fast and Long Lasting Cuts.
For Slide-Miter Saws, convention Miter Saws, and crosscutting with Portable Saws.

For fast extra-clean crosscuts and occasional rip as well on wood and plywood..
To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
0.110 kerf thickness, 0.087 plate thickness, 15° Hook Angle, 1 Flat + 2/20° alternate teeth Grind..
Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
Laser-cut plate features expansion slots to reduce noise and anti-vibration design..

JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cuts through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge..
JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts..
MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years..
DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your life!.

8pc Tungsten-Carbide Grit Hole Saws Specification This Industrial Quality Hole Saws Kit Is.
And Accurate Holes In Many Types of Hard Materials..
These Saws Can Be Able To Cut/drill Through Bricks.
Blocks Up To 2 Thick !!! They Are Made By Machined Carbon Steel With C2 Tungsten Carbide".
Grit Cutting Surfaces. Features: provides Easily Through-hole Drilling fits On Most Elec.

Features a 7.25-inch diameter (185 mm), a 5/8-inch arbor (15.875 mm), and a 7000 RPM speed rating.
Non-abrasive heat-resistant PTFE cool-cut coating prevents workpiece burns for a higher-quality cut.
Ultra-thin 1/16-inch kerf (1.6 mm) provides clean and efficient cuts.
Designed with 60 wear-resistant carbide-tipped ATB teeth.
Compatible with the majority of 7-1/4-inch miter saws, chop saws, and circular saws.