ReviewsFlute Abrasive Paper

uxcell 1.75mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs

  • Specification: Diameter: 1.75mm / 0.07″.
  • Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC.
  • Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc..
  • For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
  • Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle.
  • Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.
Check Stock

uxcell 3.25mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs

  • Specification: Diameter: 3.25mm / 0.13″.
  • Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC.
  • Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc..
  • For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
  • Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle.
  • Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.
Check Stock

Lichamp 29PCS HSS Cobalt Drill Bits Set 1/16" to 1/2" with Three Flute for Hard Metal, Hardened Stainless Steel and Cast Iron

  • UNIQUE 3X FLUTE DESIGN - Lichamp three flute patent design drill bit clears chips and particles faster, provide you with more efficient drilling experience..
  • 4X LIFESPAN MATERIAL - Made from industrial grade M35 high-speed steel with 5% cobalt provides hardness for wear resistance, withstands max 1100 degreeF..
  • MULTIPLE APPLICATION - Ideal for drilling in heavy-duty tough metal, including hard abrasive alloy metal, hardened stainless steel or cast iron..
  • SMOOTHLY DRILLING - 135-degree split point tip & twist design increases cutting speed with self-centering and prevents skating starts or walking..
  • 29PCS DRILL BIT SET - Metal index case with size chart for easy bit access and identification. Includes drill bit sizes 1/16-inch to 1/2-inch in 1/64-inch increments..
Check Stock

Lichamp 21PCS HSS Cobalt Drill Bits Set 1/16" to 3/8" with Three Flute for Hard Metal, Hardened Stainless Steel and Cast Iron

  • UNIQUE 3X FLUTE DESIGN - Lichamp three flute patent design drill bit clears chips and particles faster, provide you with more efficient drilling experience..
  • 4X LIFESPAN MATERIAL - Made from industrial grade M35 high-speed steel with 5% cobalt provides hardness for wear resistance, withstands max 1100 degreeF..
  • MULTIPLE APPLICATION - Ideal for drilling in heavy-duty tough metal, including hard abrasive alloy metal, hardened stainless steel or cast iron..
  • SMOOTHLY DRILLING - 135-degree split point tip & twist design increases cutting speed with self-centering and prevents skating starts or walking..
  • 21PCS DRILL BIT SET - Metal index case with size chart for easy bit access and identification. Includes drill bit sizes 1/16-inch to 3/8-inch in 1/64-inch increments..
Check Stock

3/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56003, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 5/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1/2\ Expansion Reamer, Carbide Tipped, Straight Shank, 56005, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 7/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

23/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56012, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56018, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

31/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56020, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56009, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56059, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock