ReviewsFlute And Bead Router Bit Set

SpeTool 5PCS 12401 4 Flutes Carbide CNC End Mill, Square Nose 1/4 inch Shank, 2-1/2 inch Long Overall, Titian Coated for Metal Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill With Flat Top, 4-Flute, For Finishing, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
  • For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
  • The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.
Check Stock

Kodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8\ Shank, 1/2\ Length of Cut, 1-1/2\ Overall Length, 1/8\ Diameter

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • Replacement tapered counter sinker drill bit set 3 Piece #10 (3/16") bit replacement Only (Without the 4 Flute cutter countersink counter-bore), made to replace the 3/16” bits of #10 countersink drill bit set for wood , with 1 Hex Wrench (1/8 inch Allen Key) included. Replacement bit countersink with hex shank compatible with 1/4" standard Quick Change chuck including impact drills.
  • Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set Maximum Torque. Packaging set combination unique design protected by US Copyright Office.
  • Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
Check Stock

Mesee Set of 2 Pieces Extra Long Straight Router Bit Set 1/4-Inch Shank Double Flute Straight Grooving Bits Trimming Cutter Woodworking Milling Tools with 2 & 3 Cutting Height

  • 1/4 Inch Shank Straight Router Bit Set with 2 Different Cutting Depth: 2" and 3'', Cutting Diameter: 3/8''.
  • Double flute straight bits, designed for trimming, three-dimensional clearance angle, slotted and wood screw holes..
  • Solid hardened steel bodies with anti-kickback design, high hardness and toughness, high abrasion resistance, impact resistance..
  • Industrial grade C3 micro grain carbide blade for cutting wood, MDF, particle boards, plywood, panels, softwood, and other synthetic wood..
  • Suitable for a router table or desktop woodworking engraving machine like CNC hand-held and table-mounted portable router,can not be used for electric drill & drill machines..
Check Stock

HILTEX 10108 Tungsten Carbide Router Bit Set, Woodworking Tools and Accessories, 1/4-Inch Shank, 24-Piece Set, Red, Blue

  • WOOD ROUTER BITS: The HILTEX Tungsten Carbide Router Bit Set is the perfect addition to your woodworking tools and equipment. Each router bit in this 24-piece set is built with a tungsten material that performs clean cuts on your wood projects..
  • TUNGSTEN BIT SET: Every router bit is tipped with machined YG8 tungsten carbide blades that can trim, edge, and cut into all types of wood. Each bit in this compact bit set is heat-resistant to help prevent damage to your wood creations..
  • EASY COMPATIBILITY: Each bit features a universal 1/4-inch shank to allow it to work with any router tool. Select bits also have ball-bearing rollers for better alignment and smoother routing..
  • VERSATILE & POWERFUL: You can use each compact router bit for wood and carpentry applications like edging, trimming, veining, and grooving. Each piece is made of hardened, solid alloy steel and has a powder-coated finish for maximum durability..
  • WHAT'S INCLUDED: This set includes 24 tungsten carbide bits and a storage box. The storage box features labeled slots for each bit for easy identification and for storage and transportation from job to job.Please note that packaging may vary between two styles..
Check Stock

USA Worktools Spiral Upcut Router Bit 1/2-Inch Shank | Three Flute, Solid Carbide with 1/2-Inch Cutting Diameter and 2-Inch Cutting Length | Overall Length of 4 Inches | Made in USA (SCUS3-120B)

  • 3 flute spiral router bit with a 1/2″ cutting diameter, 1/2″ shank, 2” cutting length, and an overall length of 4”.
  • USA Worktools’ 1/2″ spiral upcut router bit is made from premium-quality solid carbide.
  • This upcut router bit clears chips in an upward ejection, providing a very clean bottom surface.
  • Can be used on CNC routers as well as hand-held and table-mounted portable routers.
  • All USA Worktools products are made in the USA where quality measurements consistently outperform work tools manufactured in other countries where there’s not the same appreciation of craftsmanship.
Check Stock

Rockler Signmaking Router Bit Set (3 Pieces) – 1/4” Shank Router Bits for Sign Text, Fluting, & Other Effects – Router Bits 1/4 Shank Set Includes 2 V-Groove Router Bits, & Round Nose Router Bit

  • Router Bit Sign Making Kit: Get three of our most popular Rockler sign making bits in one convenient set! Our router sign making bits are carbide-tipped, with 1/4" shanks..
  • V-Groove & Round Grove Routing Bits: Our V router fluting bit & round nose bit are great for grooving in router templates for woodworking or for sign text, fluting, and other decorative effects..
  • Neat Cuts Every Time: Our router carving bit set includes one 60° V-groove bit, 90° V-groove bit, and a high core box bit for sharp, smooth carving. Final sharpening can be done with a 600 to 800 grit diamond wheel..
  • Wide Application: This carbide router set is truly versatile. Our woodworking signs router bits cleanly cut all types of wood material, such as MDF, hardwood, softwood, and particleboard..
  • What’s Included? This universal bit kit includes (1) 1/2" dia. X 5/8" high, carbide-tipped 60° V-groove bit, (1) 1/2" dia., 90° V-groove bit, and (1) 3/8" dia. x 3/8" high core router box bit..
Check Stock

Yonico Router Bits Flute and Bead 3/16-Inch Radius 1/2-Inch Shank 16145

  • Create a flute and bead design for moldings or canoe joinery.
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
  • For use on table mount and handheld router.
  • Silver induction brazing for maximum strength and durability.
Check Stock

Tongue and Groove Router Bit Set, SellyOak 1/2 Shank Tongue and Groove Router Bits + 1/2 Shank Reversible Finger Joint Router Bit for Doors, Tables, Shelves, Walls, DIY Woodwork

  • ▲Versatile Woodworking Tool Kit - Complete your hardwood tool collection with Tongue and Groove Router Bit set and Finger Joint Router Bit..
  • ▲Durable Material&Construction - This tongue and groove router bits with finger joint router bit, are made of high-quality tungsten steel alloy and high-tech special grinding process, whose blade has high strength and hardness, sharp and wear-resistant..
  • ▲For Cutting Various Materials - This router bit set is suitable for wood, MDF, chipboard, compact plywood panel.
  • Please DON'T cut ferrous metals and other materials such as steel, iron, sand, etc..
  • ▲Neat Cuts&Joints Every Time - Including Tongue and Groove Router Bit & Reversible Finger Joint Router Bit, 3 pieces in total perfect for woodworking, edging, trimming, grooving, veining wood projects..
  • ▲Wide in Use - This reliable router bit set is ideal for kitchen and bathroom doors, office cabinets, floor tables, bedroom shelves, outdoor frames, walls and more..
Check Stock

SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated.
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock