ReviewsFlute Length Router Bits

Kodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8\ Shank, 1/2\ Length of Cut, 1-1/2\ Overall Length, 1/8\ Diameter

Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated.
For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

HQMaster CNC Router Bit 10 Pack 1/8” Shank Spiral Upcut Router Bit 1 Flute End Mill Set Milling Cutter 3.175mm Cutting Single Flute Tungsten Steel Engraving Tool for MDF Acrylic PVC Wood Density Board

Range of processing ---- Used for cutting/engraving/carving/drilling/sculpturing/milling in materials like MDF, acrylic, density board, solid wood, wood, plastics, PVC, PVC expansion sheet, PP, ABS, etc..
High efficiency ---- these bits own sharp edge which is able for fast engraving that makes high efficiency.
durable, high precision and not easy to break.
it is smokeless and burr-free while processing.
Perfect cutting ---- the design of single flute, larger spiral chip space and mirror polishing of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
Dimensions ---- diameter : 1/8" (3.175mm).
cutting edge length (CEL)/flute length: 25mm.
Package contents ---- 10pcs tungsten steel bits assorted in a plastic storage case.

Check Stock

Samger Cast Steel Hardwood Flooring Jack Professional Ratcheting Hardwood Plank Jack Vinyl Flooring Tools for Laminate Flooring Installation Hard Wood Straight Tile Contractor Hand Tool

Spiral Flush-Trim Router Bits, Two Flute Solid Carbide CNC Router Bits Spiral Carbide Milling Tool (2PCS).

Check Stock

AUTOTOOLHOME 3/16' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)

AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
End Mill router bits are used for side milling, end milling, finish machining, etc..

Check Stock

KOWOOD Plus Double Flute Straight Router Bit Set 1/4 Inch Shank Cutting Diameter in 1/4” 5/16” 3/8” 1/2” with Updated Kowood C3 Carbide Great for Create Groove dado or Hollow

KOWOOD Plus double flute straight router bit set is an upgrade router kit designed for make cuts straight down into material and form a groove, dado or hollow out an area for a inlay..
KOWOOD Plus designed for Woodworking Lovers or Carpenter, provide a next-level experience..
KOWOOD Plus series router bits are all upgraded KOWOOD C3 carbide. This series of bits are in a heat-treated process, providing maximum durability of use..
Wide range of applications, suitable for dense wood, laminate, particleboard, and plywood..
Universal 1/4" tool holder is suitable for all major desktop router workbenches, such as KOWOOD, Bosch, DeWalt, Tooldo, Makita, Milwaukee, MNA, Porter & Cable, Skil, Ryobi, Black & Decker. (Fit for handheld router, table router or CNC)..

Check Stock

Yakamoz 10-Pack 1/8" Shank Upcut Spiral Router Bits 3-Flute 7/8" Cutting Length CNC Router Flat End Mill Bits for MDF Acrylic Wood PVC 7/8" Cutting Length

Type: Spiral (Upcut), Cutting Type: 3 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 7/8" (22mm), Overall Length: 1-33/64" (38.5mm).
Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
The unique flute design makes cutting process easier and faster, smooth cutting without 2nd polishing process..
Great for carving, cutting, engraving, milling in materials like density board, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
Built with tungsten steel, the CNC router mill has the superiority of high hardness, high-temperature resistance, and wear resistance..

Check Stock

Eyech 1/4 Inch Shank Flute & Bead Router Bit Set Canoe Joint Router Bits Woodworking Cutter Tools

Both of router bit are 1/4 inch shank,total length of the flute router bit : 1-3/4 inch, total length of the bead router : 2-1/8 inch,1/8 inch cutting depth.
Made of Carbide Tipped - Micro grain grade provides increased strength and utmost resistance for long-lasting performance.
Suitable for making cedar strip, hot tubs, planters, wooded canoe or lots of other curved shapes.
Cuts all composition materials,density board,solid wood, particle board, plywoods, hardwoods, and softwoods.
The flute-bead router bit use on router table use only, Stable and noiseless.

Check Stock

Drill Press Machines Parts Feed Hub Wheel & 195mm Handle Bar Set

Type: Straight, Cutting Type: 2 Flutes, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 2/3" (17mm), Overall Length: 1-33/64" (38.5mm).
Double flute design cnc router Bits have a mirror polish and large chip space which produces smooth cutting and fast chip-removal..
Industrial quality control to ensure best performance with high precision,work perfect on milling or cutting machines, ensure high work efficiency..
Made of tungsten steel material with good milling, cutting performance, ensure high work efficiency, durable and high precision..
Great for carving, cutting, engraving, milling in materials like density board, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..

Check Stock

HQMaster CNC Router Bit 1 8 Shank Ball Nose End Mill Cutting Dia. Spiral Milling Cutter Engraving Carving Tool Set Tungsten Steel for MDF Acrylic Wood PVC 10Pcs

Range of processing ---- for cutting/engraving/carving/sculpturing/roughing/milling in materials like MDF, ABS, PVC, acrylic, density board, wood, plywood, rosewood, hardwood etc..
Dimensions ---- diameter : 1/8 (3.175mm).
cutting edge length (CEL)/flute length: 17mm.
High efficiency ---- these bits own sharp edge which is able for fast engraving that makes high efficiency.
durable, high precision and not easy to break.
it is smokeless and burr-free while processing.
Perfect cutting ---- the design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
Package contents ---- 10pcs fluted tungsten steel spiral upcut ball nose bits assorted in storage case.

Check Stock

42950 1/2- inch Router Collet Fit for PORTER CABLE models, Delta, B&D

⭐Features: | For use with 1/2" shank router bits | 1/2" Router collet for use as a replacement or adapter.
⭐Auto-release design prevents "frozen" bits | Accepts 1/2" shank router bits | Auto-release design prevents router bits from sticking in the router.
⭐Designed to minimize bit run-out and enhanced robustness | Helps decrease the amount of lost bits.
⭐Specifications: | Material: Steel | Color: Black | Diameter(in): 0.5" | Outside Diameter(in): 0.5".
⭐Collet Nut size: 1/2" | Length(in): 1.5" | Threads: 20tpi.

Check Stock