ReviewsFlux Cleaner

Akfix A60 Electrical Contact Cleaner Spray - Non-Corrosive Flux Remover, Electronic Spray Cleaner for Computers, Keyboard, Monitor Screen, Battery, Safe Metal Cleaner | 1 Pack, Can, 6.7 Oz.

  • Since the electrical components and equipment are so delicate, regular cleaners should not be used to clean them. Here is Akfix A60 Contact Cleaner for that! Spray and finish it thanks to its special formula..
  • - The essential characteristic of our electronic cleaner spray is the capacity to swiftly evaporate, leaving no residue..
  • Effectively removes dirt, light oil, grease, flux and dust from electrical equipment and electronic devices. It is recommended to be tested on sensitive plastics, adhesive-mounted or stressed parts..
  • - This contact cleaner is equipped with a unique non-corrosive formula to make the connectors and contact parts more efficient to use..
  • A60 metal cleaner spray is an economic cleaning spray that is ideal for computer, battery, keyboard, and digital equipment. You can easily use it to clean any type of metal connector and contact..
Check Stock

Permatex 82588 Electrical Contact and Parts Cleaner, 11 oz.

  • For cleaning electrical and electronic devices.
  • Fast evaporating, noncorrosive cleaner leaves no residue.
  • Removes grease, dirt, oil, flux, and other surface contaminants.
  • Suggested Applications: Electronic parts such as circuit boards, computer components, relay switches.
  • electric parts such as electric motors, generators, starters, pumps, motor windings, solenoids, and compressors.
Check Stock

YIHUA 928D-III Soldering Iron,110W High Power, Fully Digital Display °F /°C- Temperature Control Soldering Tool, Accurate 194~896°F, with ON/OFF Switch, Iron Tip, Brass Wool, Automatic Sleep Mode

  • ...h work, you can turn OFF the soldering iron even when plugged in. To give you a safe soldering experience, the X-4 holder comes with a wider and more stable base to prevent toppling..
  • Extra Accessories – 4 x Quality Soldering Tips (Default Type-B, K, 2.4D, 3.2D), 1 x X-4 Heat-Resistant Soldering Iron Stand, 1x Tip Cleaner (includes brass wool), 1x Cleaning Sponge. The rosin flux inside the tip cleaner is intended to stay solid at room temperature, apply the hot soldering tip onto the rosin to melt and enjoy the benefit of the rosin flux. (improves heat transfer while not losing significant amount of heat).
  • We Support You - If any questions, contact us first via Amazon’s messaging system as we'd like to help. 12-Month US Exclusive Warranty & Responsive& Friendly Customer Assistance. Our kind reminder here: this QC passed soldering iron is for 110-127V with USA plug. Its compatible tip set is #1300 soldering tips set (available right in this store)..
Check Stock

The Original X-Tronic 3020-XTS • 75W Soldering Iron Station Kit • 2 Helping Hands • 5 Extra Tips • Roll of Solder • Brass Sponge & Flux • Tweezers • Solder Sucker • C/F, Calibrate & Sleep Features!

  • ...ion (60 Watts used for Soldering Iron &15 Watts used for Mini Mother Board in Soldering Iron) with 2 Helping Hands, 5 Extra Soldering Tips along with Side Mount Solder Roll Holder, Spring Style Soldering Iron Holder, 100% Silicone Tool Mat, Solder Sucker, Roll of 60/40 Solder, Pinpoint Tweezers & a Brass Sponge Tip Cleaner with Supply of Cleaning Flux in the Tin plus a Wet Sponge.
  • Features: ESD Safe, 10 Minute Sleep Timer, Centigrade to Fahrenheit Toggle Switch, Blue LED Readout on Control Panel, PID (Proportional-Integral-Derivative) Technology often referred to as Magic Temperature Compensation Technology, 40 Inch Very Pliable Soldering Iron Cord (Virtually No Memory) and a 55 Inch Power Cord from Wall Plug to Main Unit..
  • PLEASE NOTE: The Main (First) Photo shows the Brass Sponge Tip Cleaner with the Flux In the Round Metal Tin Separately from the Soldering Station and also shows this same Container Mounted In the Main Unit - This is FOR PHOTO PURPOSES ONLY. There is "ONLY ONE" of these Containers that come with this Soldering Station..
  • ALL X-Tronic Products come with a 30-Day Unconditional Money Back Guarantee which also includes a 3-Year Warranty with the Cost of Parts and Labor Included. The 3-year warranty is included in the product price whe....
Check Stock

Soldering Tip Cleaner, Wire-type Soldering Iron Tip Cleaner With Holder, Soft Coiled Brass Tip Cleaner Kit with 4 PCS Solder Tip Cleaning Wire and 1 PC Holder for Cleaning Soldering Irons and Tips

  • A Must Have For Cleaning Soldering Tips:The brass tip cleaner cleans the tip perfectly only need dip your solder iron into this spongy metal mesh. Such cleaners are used for removing solder from the tip’s surface and cleaning the working surfaces from oxidation products, which prolongs the life of the tool..
  • Time Saver:Does a great job of keeping the solder gun tip clean regardless of solder gun temp. Used 6-8 times so far and the coiled brass is still in great shape. A few dabs in this, a touch of flux, and solder away! The soldering iron tip cleaner will save you lots of time..
  • High Quality Material:The best material for these cleaners is high-quality brass and extra-strong stainless steel. A cleaner resembles the ball of spiral-shaped brass fine chips. Brass has a lower density than the solder’s tip coating material but is higher than the oxidation products on the tool surface. It is sufficient to immerse the soldering iron’s tip in the chips to remove the oxidation..
  • Cleaning With This Soldering Iron Tip Cleaner Does Not Require Water: This special cleaner does not reduce the working temperature of the tool. They are made of non-corrosive material and does not require additional time the tool’s reheating..
Check Stock

3 Pieces No Clean Soldering Flux Pen Rosin Solder Flux Pen for Electronics Tabbing Wiring Solder, Welding Maintenance of PCB Board, No

  • Quantity and size: package contains 3 pieces soldering flux pens, enough quantity for meeting your daily usage and replacement.
  • Each soldering flux pen measures approx. 5.6 inches in length.
  • Safe to use: these flux pens are made of quality material, no leak and safe to use.
  • Low solids content and quality of the activator system results in practically no residue left on the assembly after soldering.
  • No residue will interfere with electrical testing.
  • Useful and practical: no clean soldering flux pen is a novel tool for rework and repair welding.
  • It allows controlled application of flux, thereby removing dirt in the flux bottle.
  • Pen tip of 10 ml with practical designed felt tip.
  • The solid content is low and there is almost no residue.
  • Wide application: rosin solder flux pen is suitable for automotive, computer, work for rework, and through hole solder joints.
  • It is lightweight and would not occupy too much space, suitable pocket size to carry.
  • How to use: before the first time use, you should press the pen tip 1 - 2 times for releasing air, then use no clean solder flux pen to remove the oxidizing wax.
  • After that, you can use the alcohol to clean the pen.
Check Stock

BEEYUIHF Rosin Soldering Paste Flux, Solder Paste Flux, Flux for Soldering, For SMD PCB Soldering & Repair, Electrical Soldering Rosin Flux (1.76oz/50g)

  • BEEYUIHF #7150 Soldering Paste Net weight: (1.76oz/50g) Rosin Solder Paste Flux, made of no acid, Lead-Free, No-Clean, soldering flux paste which is not easy to dump. Rosin Soldering Paste,High Purity,Good helper for repairing and welding..
  • Soldering Flux Paste Feature: No corrosion, high intensity joint, good immersion, good insulation, good soldering properties, smooth welding surface..
  • Flux for soldering application: Maintenance drag soldering, BGA planting tin, maintenance desoldering, electronic components soldering, mobile phone maintenance, mobile phone chip maintenance, LED lighting, home appliance maintenance.Have strong oxide removal effect to gold-copper alloy substrate and wire..
  • #7150 paste flux features: Lead-free, halogen-free, acid-free, no cleaning, less residue, easy to tin, less smoke, help soldering firm, make soldering fluidity better, slightly yellow paste..
  • Solder Flux also a good helper for maintenance enginee. Rosin soldering flux paste metal can packaging, High-quality aluminum box packaging, not easy to break..
Check Stock

X-Tronic 3060-PRO • 75W Soldering Iron Station Kit • 5 Extra Tips • Mini Mag Lamp • 4 Helping Hands • Solder Sucker • Tweezers • 50g Solder • Brass Sponge w/Flux • Sleep Func, °C/°F, 3 Temp Presets!

  • ...ther Board in Soldering Iron) with 2 Helping Hands for Propping Up Smaller PCB’s right in front of the unit for you to work on, a 100% Silicone Tool Mat, 5 Extra Sizes/Styles of Soldering Tips along with Side Mount Solder Roll Holder, 50g Roll of 60/40 Solder, Spring Style Soldering Iron Holder & Brass Sponge Tip Cleaner with Supply of Cleaning Flux in the Tin plus a Wet Sponge..
  • Features: ESD Safe, 10 Minute Sleep Timer, Centigrade to Fahrenheit Toggle Switch, Blue LED Readout on Control Panel, PID (Proportional-Integral-Derivative) Technology often referred to as Magic Temperature Compensation Technology, 40 Inch Very Pliable Soldering Iron Cord (Virtually No Memory) and a 55 Inch Power Cord from Wall Plug to Main Unit..
  • PLEASE NOTE: The Main (First) Photo shows the Brass Sponge Tip Cleaner with the Flux In the Round Metal Tin Separately from the Soldering Station and also shows this same Container Mounted In the Main Unit - This is FOR PHOTO PURPOSES ONLY. There is "ONLY ONE" of these Containers that come with this Soldering Station..
  • ALL X-Tronic Products come with a 30-Day Unconditional Money Back Guarantee which also includes a 3-Year Warranty with the Cost of Parts and Labor Included. The 3-year warranty is included in the product price wh....
Check Stock

Solder Flux (56.6 grms)| flux paste | rosin solder | electrical flux paste | solder paste no clean | flux paste for soldering | rosen flux paste | solder flux electrical | flux paste for electronics

  • [Enought Quantity] : This rosin solder flux comes in 1 jar of 56 grams of soldering flux..
  • [Non Corrosive]: This non acid flux is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards..
  • [Oxidation Resistance] : This solder flux for electronics Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump or waste..
  • [Strong Capability]: This rosin paste flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework..
Check Stock

Solder Tip Cleaning Brass Wire 6 packs, Replacement Cleaning Brass Wire for Soldering Station Tip Cleaner

  • SOLDERING IRON TIP CLEANER: Effectively remove iron oxide and solder on the iron tip..
  • IMPROVE EFFICIENCY OF WELDING: Without adding water,avoid iron head cooling,no the outbreak of solder ball,improve the efficiency of welding..
  • ALUMINUM HLODER CASE: Aluminum with strong corrosion resistance..
  • COPPER WIRE BALL: The brass ball contains flux to effectively remove the iron oxide and extend the life of the iron tip..
  • ECO-FRIENDLY: No contamination risk compared to conventional tip tinners.
Check Stock

100PCS-Flux Core Welding Wire for Aluminum,Low Temperature Flux Cored Welding Rod Make Repair Aluminum Radiator,Ideal for Both Beginners And Professionals Alike,752°F(400°C) Melting Point.(13"/1.6mm)

  • Simplified welding process: Flux-cored rods have a low melting point and do not require solder powder, making them easy to use even for beginners..
  • High-quality aluminum brazing: The aluminum brazing rods come with flux already included, ensuring a durable and long-lasting bond..
  • Only for Welding Aluminum - 100Pcs(13"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
  • Flux Cored Aluminum Welding Rod Make Repair Aluminum Radiator Easily： Flux Core Welding Wire is Commonly Used for Repairing Aluminum Radiators in Automobiles, Motorcycles, Air Conditioners, and Refrigerators, Making it A Versatile Tool to Have In Your Toolbox..
Check Stock