ReviewsFlux For Soldering Electronics

AUSTOR Pack of 6 Solder Wire 60-40 Rosin Core Solder 0.6mm Electrical Soldering Wire 20g

  • High quality: good solder ability in both electrical conductivity and thermal conductivity, can be accomplished quickly, and fit for various kinds of soldering iron.
  • Easy to use: flows well and heats evenly, the melting point of soldering iron wire is 185°C - 190°C (365°F - 374°F).
  • Relative parameters: Tin 60% and Lead 40% is perfect for electronic assembly, flux 1.8% is good for soldering, 0.6mm diameter for good joints to prevent component overheating.
  • Easy to carry: you can take the solder wire anywhere with your pocket. And the plastic tube will protect solder from dirt and moisture(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website).
  • Wide application: the rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices.
Check Stock

Electrical Solder Wire Lead Free Rosin Core Flux 2.5% Electronic Soldering Diameter 0.04in 1mm No Lead 1.76oz 50g Sn99 Ag0.3 Cu0.7 Flow RoHS

  • ROSIN CORE- easy for soldering with rosin core, the flux 2.5% better than others with 2.0% on the flowability.
  • LOW MELTING POINT- the melting temperature is about 419 Deg.F, suitable for all soldering tools.
  • ROHS COMPLIANT- Pb free, good for environmental protection.
  • WIDELY APPLICATION- the 0.04in diameter solder wire is common to solder most electronics components or wire, ideal for electrical soldering, repairing, diy.
  • QUALITY SOLDER- Made with Sn99, Ag0.3 and Cu0.7, the silver 0.3% is important for electric conductivity.
Check Stock

AUSTOR 6 Pack 60-40 Rosin Core Solder, Solder Wire Tin Lead Electrical Soldering Tools Diameter 0.8mm, 20g

  • High quality: good solder ability in both electrical conductivity and thermal conductivity, working quickly, and suitable for various kinds of soldering iron.
  • Easy to use: flows well and heats evenly, the melting point of soldering iron wire is 185°C - 190°C (365°F - 374°F).
  • Relative parameters:60% Tin and 40% Lead are apply for electronic assembly perfectly. 1.8% flux is good for soldering, diameter 0.8mm is good joint and avoid components overheating.
  • Easy to carry: you can take the solder wire anywhere in your pocket. And the plastic tube protect solder from dirt and moisture(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website).
  • Wide application: the rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices.
Check Stock

Soldering Iron Kit, 100W LCD Digital Soldering Gun, Portable Solder Iron with Adjustable Temperature Controlled and Fast Heating Ceramic Thermostatic Design, On/Off Switch, 9pcs Soldering Kit

  • [Professional Soldering Iron Kit] -This soldering gun kit includes a pencil-type iron soldering, 5 pcs soldering tips, a stand, solder flux, solder wire. All of these are enough to meet the needs of any electronics hobbyist's daily welder work..
  • [Top Function Design] -This soldering iron is designed with adjustable temperature and thermostatic, on/off switch, LCD digital display, can accurately adjust the temperature between Celsius( 200-500℃) and Fahrenheit (392-932℉). Compared with a soldering iron station, it is easy to carry this pen-type welding tool, which is as portable as wireless soldering, everywhere..
  • [Heat Up Fast & Cool Handle] -This solder iron contains an inner-heated ceramic core with 100w, which could heat up to operating temperatures within 20 seconds. Heat-resistant screw head can insulate temperature effectively to get a long cool handle..
  • [Accuracy Temperature Control] -The high-quality heating wires built solder gun inside to control temperature and adjusts with PID (proportional-integral-derivative) technology. And the temperature sensor in it will deliver precise temperature and heat output in time..
  • [Wide Range of Applications] -This micro soldering kit solders electronic circuit boards, computers, DIY home repairs, jewe....
Check Stock

Solder Smoker Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Soldering with spare Carbon filter

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station..
  • It adopt the high performance fan with low noise, and the suction is strongThe structure is simple. The replacement of the activated carbon filter....
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. Long-lasting working time for over 50,000 hours..
  • Comes with 5 Active carbon filters. The filter is made of special foam with refined activated carbon, which has high suction and flux absorption....
  • It's a good helper for mobile phone maintenance, great for electronics, arts and crafts, stained glass work, soldering station work..
Check Stock

2 Jar Solder Flux, Flux for Soldering, Rosin Soldering Flux Paste for Lead-Free Electronics Soldering and Soldering DIY (1.2oz/35g in a Jar)

  • ENOUGHT QUANTITY: The package includes 2 jars of soldering flux. A total of 70 g. Enough quantity for your use..
  • NON-CORROSIVE: Rosin is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards..
  • OXIDATION RESISTANCE: Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump..
  • STRONG APPLICABILITY: Flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework..
  • WHAT YOU GET: Rosin soldering flux paste * 2, our 7*24 friendly customer service for peace of mind..
Check Stock

5 Pieces No Clean Solder Flux Pen 5.6 Inch Length for Electronics Tabbing Wire Soldering Welding Repair

  • What can you get: the package includes 5 pieces of no clean solder flux pens, enough quantity providing you a wide choice for daily life use and replace.
  • Proper size: the soldering no clean flux pen measure approx. 14.3 cm/ 5.6 inches in length, please check the size carefully before purchasing.
  • Reliable and quality material: the liquid soldering pen is made of reliable materials and no leak and safe design for protecting the flux, keep you from touching the organic solvents.
  • Wide applications: these flux pens can be applied for laboratory, computer, telecommunications, home repairs, bringing a lot of convenience to your work.
  • Simple operation: you only need to press the pen tip 1-2 times to release the liquid, and after use, the flux pen can be cleaned with alcohol.
Check Stock

10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance

  • Nice combination: you will get 5 no clean soldering flux pens and 5 solder remover wick sets, 10 in total, sufficient quantity, thoughtful combination, to meet daily use and replacement needs.
  • Appropriate size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
  • Please check the size carefully before purchasing.
  • Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
  • And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
  • Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
  • Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
  • Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and effic....
Check Stock

Soldering Station by RHAEGON, 75W Digital LED Display Soldering Kit Adjustable Temp 356℉ - 896℉, ℃/℉, Intelligent Temp Control, ESD Safe Welding Iron Kit with Stand, 5 Spare Tips, Lead-free Solder

  • ...cover. Accessories can be placed on the stand properly..
  • 【Super fast Heating Element】: The soldering iron adopt high-quality ceramic heater imported from German, which can heat up to the set temperature within 15s.
  • 【Wide Applications】: Perfect for household repairs, school labs, repair workshops and precision electronics. Also very suitable for DIY enthusiast..
  • 【Note】: This model works on 110-120V with its 3-pin US plug. Specially Note: 1. If the machine can not be turned on, please check if all interface is correctly connected or whether the fuse is disconnected or need to be changed. 2. The digital screen will not display temp if the soldering iron pen is not connected with the station.
Check Stock

12Pcs Trimmer Potentiometer Sensor Replacement for Xbox One,PS3,PS4 Switch Pro Controllers,Trim Pot Resistors Repair Parts for Thumb Stick Analog Joystick

  • Useful:The 3Pin trimmer potentiometer sensor needs to be replaced when the controller has the problem of creeping, stuttering, a blind spot, a dead spot, a dead zone or wouldn't center after years of wear and tear.Soldering the unit with only 3 prongs will be much more easier than replacing the 14Pin joystick assembly..
  • Used for:The trim pot resistor is OEM repair parts, the same model as the one in your controller. The genuine replacement sensor is to ensure accuracy and prolong lifespan. replacement for the wireless controllers below: PS3.
  • PS4 DualShock4 series (PS4, PS4 Slim, PS4 Pro).
  • Xbox One series (Xbox One, One S, One X and Elite).
  • Note:Make sure you have basic soldering skills and some soldering supplies like an electronics solder iron and small gauge solder. Use a pair of pliers to separate the problem sensor off the thumbstick component. A metal pick helps to clear the holes in the PCB. Re-soldering the new unit in is a breeze. Just remember to use flux and keep the iron's tip well tinned..
  • Package include: 12Pcs potentiometer sensor modules for games controller joystick..
Check Stock

LDK Soldering Iron Kit Electronics, [Upgraded] Full Set 60W 110V Adjustable Temperature Welding Tool with 5pcs Different Tips, Stand, Tweezers, Sponge, Flux Pen, Solder Wire and User Manual

  • Adjustable Temperature from 200-450 (392 to 842 ). Heat up fast and work great..
  • The Solder Tin/Lead 60/40, Dia 1.0mm, 13g, Flux 2.0%, Melting Point: 183..
  • Upgraded Heat Resistant Material and the steel-pipe four ventilation holes on the soldering iron design helps cool fast..
  • Desoldering Pump - High pressure vacuum tube with aluminum body frame, best for removing solder from PCB through hole solder joints..
  • 5 Different Tips to meet all your soldering needs. Best gift idea for DIYer, various repaired usage of electronics and chipboards, welding, jewelry, guitar, watches, wiring, mobile device, computers hardware, small electronic work..
Check Stock