ReviewsFlux Removers

VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1

  • Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!.
  • Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily.
  • The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free.
  • Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up.
  • The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!.
Check Stock

Lincoln Electric KP1947-1Flux-Cored Nozzle

  • Nozzle extends the life of a flux-cored wire-feed welding gun.
  • Protects tip adapter or gas diffuser from spatter and from shorting to the workpieceDescriptionThe Lincoln Electric KH726 flux-cored nozzle extends the life of the welding gun by protecting the tip adapter/gas diffuser from spatter and from shorting to the workpiece. This nozzle is to be used for flux-cored wire feed welding applications..
Check Stock

Harris SCLF16 Stay Clean Soldering Flux, 16 oz.

  • Nice Combination: the package comes with 1 solder wire, 1 no clean solder wicks, 1Soldering Flux & 6 welding auxiliary tools, enough quantity and practical toolset for welding and desoldering requirements.
  • 6 Welding Auxiliary Tools: To meet the welding operation requirements of press, cutting, scraping, hooks brushes, fork. Also, it can be applied to integrated circuit assembly and disassembly, precision electronic components.
  • Safe Rosin Paste Flux: Refined with weak acid flux, semi-solid, and not easy to pour. The most suitable flux for hobby and electronic assembly. Good for cables and large terminals. Removes oil or oxides, and improves wettability.
  • Solder Wick & Solder Wire: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive. Solder wire has a low melting point, flows smoothly, has fast soldering speed, and has strong solder joints.
  • Multifunctional Welding Kit: Ideal for repairs, auxiliary welding, and assembly work. For precision welding repair work such as fixing, removing, cleaning, etc., making the work easier.
Check Stock

MG Chemicals 60/40 Rosin Core Leaded Solder, 0.032" Diameter, 0.6 oz Pocket Pack

  • Non-corrosive and electrically non-conductive flux residue.
  • Standard flux core percentage at 2.2 percent, melting point: 183 degree C/361 degree F.
Check Stock

Handy Flux, 7 Ounce Jar with Brush

  • Function: Soldering electronic components. Anti-oxidation flux. Better welding fluidity. Easy to tin, easy to solder, strong welding..
  • Feature: Non-toxic, no corrosion, high intensity joint, good immersion, good insulation, good soldering properties, smooth welding surface..
  • Application: Soldering flux is suitable for welding on instruments, meters, gold, copper, iron, tin and other metals. Widely used in phone PCB, SMD, SMT patch and appliance repair..
Check Stock

Handy Flux - 7 oz Jar w/Brush General Purpose Jewelry Making Metal Brazing Soldering Flux

  • Handy Flux is a very durable and powerful general purpose flux that protects your parts up to 1600°F (870°C).
  • It is an active fluoride-type flux which is appropriate for all nonferrous metals.
  • It begins to melt and dissolve oxides at 600°F (320°C).
Check Stock

YESWELDER MIG-250 PRO Aluminum MIG Welder, 250Amp 220V, Gas Gasless MIG Welding Machine MIG/Lift TIG/ARC 3 in 1 Welder

  • Multi-functions -MIG synergistic setting & MIG manual setting, Gasless Flux wire MIG Welds, stick welds, and Lift TIG welds. Dynamic control-set arc control to crisp or soft depending on your preference and application. (TIG torch needs purchasing separately, WP-17V-35).
  • Synergic MIG -provides communication between the power source, feeder, and gun. Easy work with new welders or users..
  • Gasless Flux MIG welds -release hard moving of gas cylinder, release the low efficiency of stick welds, and work with gasless flux wire perfectly.
  • Various Welding Wire Suitable for all kinds of welding requirements .023”/.030”/.035” solid/SS wire, .023”/.030”/.035” flux core wire for MIG manual setting.
  • only .035” available in MIG synergistic setting .035”/.045” aluminum wire..
Check Stock

MG Chemicals 4890 60/40 Rosin Core Leaded Solder Wire Pocket Pack 0.81mm/0.032 Dia 2 Pocket Packs

  • Non-corrosive non-conductive flux residue.
  • Melting point: 183 °c - 191 °c/ 361 °f - 376 °f.
Check Stock

Welding Machine 3 in 1 Gasless Mig Welder 110/220V, Flux Core/Lift TIG/Stick Welder 160A

  • Welding Machine 3 in 1: 3 in 1 combo gasless flux core welder, stick welder and Lift TIG welder. (TIG torch need purchasing separately)..
  • Dual Voltage Input Design: Welding machine can be plugged into 110V / 220V dual voltage (automatic matching)..
  • 160A Welder: Up to 160A output current that can weld mild up to 5/32 inch (4.0mm) plate. The welder comes with 10pcs welding rods..
  • Gasless MIG Welder: Release hard moving of gas cylinder, and work with flux core wire perfectly( welder suitable for 0.030/0.035" flux core wire), comes with 1pcs 0.030"/2 lbs flux core wire, 2pcs 0.030" mig tips, 2pcs 0.035" mig tips..
  • Synergic Control: Through a knob to adjust the welding current, other welding parameters (wire feeding speed, welding voltage, inductance value, etc.) automatically matched with it. It has the feature of easy adjustment. It is suitable for both professional welders and novices..
Check Stock

Corn Removers for Feet & Toes Corn Removers with Salicylic Acid Corn Removers for Toes Pads Foot Corn Remover & Callous Remover Corn Pads for Toes & Feet 24 Pack

  • For Corns And Calluses: We made our portable and simple to use corn removers with Salicylic Acid to help provide you with efficiency to aid in softening and breaking down corns. It can be used as a hand callus remover or foot callus removal also..
  • All Day Coverage: Unlike corn remover sticks that wear out quickly, our corn removers for toes and feet stay securely in place all day while providing cushioning and preventing friction when wearing shoes. These corn pads for feet & toe can simply stick them on and go on with the rest of your day.
  • Simple To Use: The corn removers for toes are designed to provide a suitable fit for most parts of the body. They can be safely used on your big toes, heels, feet, hands, or any other spot safely to help soften corn and calluses for easier removal.
  • Compact And Easy To Carry: Thanks to the lightweight and easy to apply design, our corn pads for toes and feet are a breeze to use at home and on the go. Corn removers for feet can easily be carried in your purse, backpack, and other bags for use whenever you need them.
  • Happiness Guarantee: If you are not satisfied for any reason with our salicylic acid corn remover and callous remover, please contact us. We will do our best to make it right..
Check Stock

2 Jar Solder Flux, Flux for Soldering, Rosin Soldering Flux Paste for Lead-Free Electronics Soldering and Soldering DIY (1.2oz/35g in a Jar)

  • ENOUGHT QUANTITY: The package includes 2 jars of soldering flux. A total of 70 g. Enough quantity for your use..
  • NON-CORROSIVE: Rosin is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards..
  • OXIDATION RESISTANCE: Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump..
  • STRONG APPLICABILITY: Flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework..
  • WHAT YOU GET: Rosin soldering flux paste * 2, our 7*24 friendly customer service for peace of mind..
Check Stock