ReviewsFlywheel Cover

Shorty's Skate Tool The Wench

  • Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Check Stock

Chelhead LS Flywheel Locking Tool Steel Black Oxide Flexplate Locking Holder Tool Compatible with Engine Chevy LS 1 2 3 LSX

  • Chelhead LS flywheel locking tool Compatible with Chevy LS 1 2 3 LSX, clears all RWD bellhousings-Manual and Automatic (do not work on FWD engines).
  • TIG welded using 1/4" cold rolled USA Steel, proven design for strength and reliability.
  • Easy to install - ls engine tools just bolts in place of your starter and locks securely into the flywheel teeth.
  • ls flywheel locking tool are designed to work on engines mounted to an engine stand or an engine already installed in the vehicle.
  • Packing: 1PCS Engine Flywheel Locking Tool Comes with two proper length grade 8.8 bolts.
Check Stock

General Motors, FLYWHEEL, 12574404

  • The adjustable wrench, fine workmanship, reliable quality, reasonable product design, simple and convenient,.
  • Made of high- quality metal, sturdy and durable. Adjustable design, suitable for different sizes of flywheel grooves..
  • Small and light, easy to carry. Universal design, for most motorcycle flywheel and clutch discs..
  • How to use: adjust the arms to a suitable distance through the screw and then pin into the corresponding slots..
  • The adjustable wrench is a very useful manual tool, a good repair tool for motorcycle flywheel..
Check Stock

LOSTAR Chevy Bell Housing Kit + 11" Clutch Fork Inspection Cover Throwout Bearing Clutch Fork Boot Pushrod Bolts Chevy 650-39755, 3899621, 3843943

  • ✅Will not work on 1962-1967 Chevy II & Chevy Nova models as the size of the transmission tunnel is too narrow. Will not work on Monza or Vega as they both used a cable operated 10.5" clutch with the pivot on the other side. The clutch fork was also angled about 45 degrees not straight across..
  • ✅Compatibility: 1964-1988 Chevy Chevelle, Malibu, Monte Carlo*, 1959-1987 Ch-evy El Camino*, 1959-1988 Ch-evy Impala, Caprice, Bel Air, Biscayne, Brookwood, Kingswood, Nomad, Sedan Delivery*, 1963-1981 Ch-evy Corvette*, 1968-1974 Ch-evy II, Nova*, 1967-1981 Ch-evy Camaro*, With Manual Transmissions & 168 tooth Flywheel.
  • ✅Package includes: 1 x Bellhousing, 1 x Flywheel Inspection Cover, 1 x Clutch Fork with Ball Retaining Spring, 1 x Throwout Bearing, 1 x Clutch Fork Boot, 1 x Standard Clutch Fork Pivot Ball, Some Necessary hardware.
  • ✅Replacement OEM ( Original Equipment Part) Number: 650-39755, 3899621, 3843943, 3892632, 19245400, 3993851, 3729000.
  • ✅1 Year Unlimited-mileage Quality Guarantee.
Check Stock

XianFeng 22100 Flywheel Locking Tool for 6.6L Duramax Engine with 36mm 3/4 Inch Wench

  • Work on Duramax 2500 / 3500 pickups .Remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Toothed pieces with screws---Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • Forged 36mm socket---Use on the balancer bolt.Use with a 3/4" square drive wrench.
  • Quality tool ---Made of CRV steel with durability, flywheel locking tool is anti-rust and corrosion-resistant.
Check Stock

Goshfun Motherboard Kit for Repairing and Upgrading of NERF Modulus Regulator C1295 Regulator

  • The modified body can be refit 12v lithium battery..
  • Since the original main body can not modify aluminum battery after changing the flywheel, it is very limited in performance. After the main board is modified, the main board can withstand the voltage of 12-20v, and the lithium battery can be discharged with large rate, which is convenient for subsequent modification of metal flywheel, flywheel cage and other products.
  • Feature-rich: Single / three / burst mode, dart count, empty magazine on-hook, flywheel instantaneous stop / noise reduction control, voltage display and low voltage prompt.
  • Motherboard kit for repairing and upgrading damaged motherboard of NERF modulus Regulator C1295 REGULATOR.
  • Simple installation: the wire is fixed with screw column, can be installed without welding. Wide voltage operation (6-12V). Can hold for most 2s motor.
Check Stock

YAMIX WORKER Modified Flywheel Update Kits for nerf n-Strike Elite stryfe/rapidstrike CS-18/Infinus Diamond Pattern - Blue

  • ★ Flywheel Update Kits Includes - 1 x Oblique Flywheel Cage.
  • ★ APPLY- Suitable for electric repeating blaster refitting, especially perfect for modified nerf n-strike elite stryfe, nerf CS-18 n-strike elite....
  • ★ FEATURE - Oblique flywheel cage design provides higher precision. High-end modified parts set make your shooting fast, accurately and powerfully,....
  • ★ FUNCTION - Unique diamond-pattern effectively increase the friction between bullet and flywheel to reduce the degradation of energy and advance....
  • ★ ADVISE - The set is partial to balanced type and the accuracy is better, suitable for junior and intermediate players..
Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

Yamix Worker 435 PC Flywheel Update Kit for Worker Dominator Blaster/ Worker Swordfish /nerf stryfe/ nerf CS-18 rapidstrike Blaster Oblique Flywheel Cage

  • ★ Flywheel Update Kit Includes - 1 x Oblique Flywheel Cage.
  • ★ APPLY - Suitable for modified Worker Dominator Blaster, Worker Swordfish Blaster, nerf n-strike elite stryfe, nerf CS-18 n-strike elite....
  • ★ PC Plastic Flywheel - Durable and without deformation, 34mm in diameter, increase accuracy and range..
  • ★ PC Plastic Flywheel Cage - Make the dart dart more accurately, smoothy, and make a correction to the end of the dart..
  • ★ High-end modified motor makes your shooting fast, accurately and powerfully, which provides best game experience..
Check Stock

Bicycle Freewheel Turner Chain Whip Cassette Sprocket Remover Tool Freewheel Repair Tools Bicycle Chain Repair Tool

  • High quality steel material can be stable and durable.
  • Suitable for bicycle mountain bike flywheel.
  • Used for assistance tool or flywheel fixation tool during flywheel disassembly.
  • Rubber handle can be comfortable for usage and labor saving.
Check Stock

PIONEER 153 tooth Flexplate+ARP BOLTS Chevy SB 305 327 350 68-85+BB 396 402 427 (Flywheel & Bolts)

  • Chevy/GM polished aluminum flywheel/flexplate dust cover..
  • Fits Chevy/GM Turbo TH-350 and Chevy/GM Turbo TH-400 transmissions..
Check Stock