ReviewsFlywheel Series

vanpro DIY Electric Skateboard 83MM 90MM 97MM PU Wheel Pulleys Kit Set 36/18 Tooth Belt 15MM 5M

  • Product does not include wheels Please pay attention to confirm（Only for our motor Mount） whether the PU wheel hole style is suitable, the motor....
  • Works with Flywheel wheels Cruiser clones ，diameter:83/90/97/100MM Width: 52MM pu wheel 6rectangular holes wheel，.
  • Only suitable for 63 series（6374） brushless motor， （Little Pulleys Aperture: 10MM）.
  • The size of the motor bracket suitable for 63series（6374）brushless motor must be compatible, and the adjustable bracket is required to meet the....
  • pulleys wheel 36/18 5M HTD belt width 15MM perimeter285MM.
Check Stock

QISF 2Pcs Magneto Flywheel Puller 24mm & 27mm and 20mm & 24mm Clutch Lock Nut Spanner Tool for Motorcycle ATV Dirt Bike Scooter Repair Tool

  • 【Function】-- Clutch plate hub nut spanner tool designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.Another Used for removal of the flywheel or rotor if applicable..
  • 【Fits】 Flywheel Puller for GY6 50CC 125CC 150CC Yamaha Honda Suzuki KTM ATV scooter dirt bike.
  • Clutch lock tool for 50cc-125cc Honda Motorcycle ATV Dirt Bike Go Kart Pit Bike 4 Wheeler.
  • 【Flywheel puller Size & Material】-- Stator magneto flywheel puller with 2 sizes:24mm&27mm.
  • 【Clutch lock Size】-- Clutch lock tool Inner Diameter(upper): 20mm.
  • 【Package includes】-- 1×Magneto Flywheel Puller, 1×Clutch lock tool.
Check Stock

Shorty's Skate Tool The Wench

  • Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Check Stock

Manual Walking Treadmill with LCD Display Compact Folding,Slope Adjustment,Portability Wheels Perfect for Home Use

  • 【PLEASE NOTE】--Non-electric treadmill, no power, mechanical walking machine. The mechanical treadmill drives the flywheel according to the inertia....
  • 【WHY WE ALL LOVE IT】--Inertial double flywheel, double flywheel weight inertia allows you to run more smoothly and run better, thick material will....
  • 【SAFE AND RELIABLE】--Suction cup base, stable upgrade.Flywheel protective cover, safety pedal, rear cover, safety upgrade..
  • 【MULTIFUNCTIONAL EXERCISE】--Multifunctional in one: adjustable armrests, sit-ups, twists, walking!Slope adjustment，Choose slope according to the....
  • 【90 DAYS NO REASON TO RETURN OR EXCHANGE】--You can contact us at any time if you have any questions during use. We have absolute confidence in the....
Check Stock

Chelhead LS Flywheel Locking Tool Steel Black Oxide Flexplate Locking Holder Tool Compatible with Engine Chevy LS 1 2 3 LSX

  • Chelhead LS flywheel locking tool Compatible with Chevy LS 1 2 3 LSX, clears all RWD bellhousings-Manual and Automatic (do not work on FWD engines).
  • TIG welded using 1/4" cold rolled USA Steel, proven design for strength and reliability.
  • Easy to install - ls engine tools just bolts in place of your starter and locks securely into the flywheel teeth.
  • ls flywheel locking tool are designed to work on engines mounted to an engine stand or an engine already installed in the vehicle.
  • Packing: 1PCS Engine Flywheel Locking Tool Comes with two proper length grade 8.8 bolts.
Check Stock

General Motors, FLYWHEEL, 12574404

  • The adjustable wrench, fine workmanship, reliable quality, reasonable product design, simple and convenient,.
  • Made of high- quality metal, sturdy and durable. Adjustable design, suitable for different sizes of flywheel grooves..
  • Small and light, easy to carry. Universal design, for most motorcycle flywheel and clutch discs..
  • How to use: adjust the arms to a suitable distance through the screw and then pin into the corresponding slots..
  • The adjustable wrench is a very useful manual tool, a good repair tool for motorcycle flywheel..
Check Stock

XianFeng 22100 Flywheel Locking Tool for 6.6L Duramax Engine with 36mm 3/4 Inch Wench

  • Work on Duramax 2500 / 3500 pickups .Remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Toothed pieces with screws---Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • Forged 36mm socket---Use on the balancer bolt.Use with a 3/4" square drive wrench.
  • Quality tool ---Made of CRV steel with durability, flywheel locking tool is anti-rust and corrosion-resistant.
Check Stock

Goshfun Motherboard Kit for Repairing and Upgrading of NERF Modulus Regulator C1295 Regulator

  • The modified body can be refit 12v lithium battery..
  • Since the original main body can not modify aluminum battery after changing the flywheel, it is very limited in performance. After the main board is modified, the main board can withstand the voltage of 12-20v, and the lithium battery can be discharged with large rate, which is convenient for subsequent modification of metal flywheel, flywheel cage and other products.
  • Feature-rich: Single / three / burst mode, dart count, empty magazine on-hook, flywheel instantaneous stop / noise reduction control, voltage display and low voltage prompt.
  • Motherboard kit for repairing and upgrading damaged motherboard of NERF modulus Regulator C1295 REGULATOR.
  • Simple installation: the wire is fixed with screw column, can be installed without welding. Wide voltage operation (6-12V). Can hold for most 2s motor.
Check Stock

YAMIX WORKER Modified Flywheel Update Kits for nerf n-Strike Elite stryfe/rapidstrike CS-18/Infinus Diamond Pattern - Blue

  • ★ Flywheel Update Kits Includes - 1 x Oblique Flywheel Cage.
  • ★ APPLY- Suitable for electric repeating blaster refitting, especially perfect for modified nerf n-strike elite stryfe, nerf CS-18 n-strike elite....
  • ★ FEATURE - Oblique flywheel cage design provides higher precision. High-end modified parts set make your shooting fast, accurately and powerfully,....
  • ★ FUNCTION - Unique diamond-pattern effectively increase the friction between bullet and flywheel to reduce the degradation of energy and advance....
  • ★ ADVISE - The set is partial to balanced type and the accuracy is better, suitable for junior and intermediate players..
Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

Yamix Worker 435 PC Flywheel Update Kit for Worker Dominator Blaster/ Worker Swordfish /nerf stryfe/ nerf CS-18 rapidstrike Blaster Oblique Flywheel Cage

  • ★ Flywheel Update Kit Includes - 1 x Oblique Flywheel Cage.
  • ★ APPLY - Suitable for modified Worker Dominator Blaster, Worker Swordfish Blaster, nerf n-strike elite stryfe, nerf CS-18 n-strike elite....
  • ★ PC Plastic Flywheel - Durable and without deformation, 34mm in diameter, increase accuracy and range..
  • ★ PC Plastic Flywheel Cage - Make the dart dart more accurately, smoothy, and make a correction to the end of the dart..
  • ★ High-end modified motor makes your shooting fast, accurately and powerfully, which provides best game experience..
Check Stock