ReviewsFoam Rod Extruder

Raise3D Pro3 Plus Dual Extruder 3D Printer

  • Huge Build Volume: Single: 11.8" × 11.8" × 23.8" Dual: 10" × 11.8" × 23.8".
  • Maximum Nozzle Temp: 300ºC, Max Build Plate Temp120ºC. Prints with a Variety of Materials up to 300ºC Including: PLA/ ABS/ HIPS/ PC/ TPU/ TPE/ PETG/ ASA/ PP/ PVA/ Nylon/ Glass Fiber Infused/ Carbon Fiber Infused/ Metal Fill/ Wood Fill.
  • Auto Bed Leveling & Flexible Build Plate. Fully Enclosed with Air Flow Manager & Automatic Pausing with Door/Lid Sensors.
  • Interchangeable Hot End and Extruder Cover, Z-axis rod stiffness increased by 75% to deliver a more stable performance..
  • Note: 3D Printlife filament profiles are loaded in Raise3D’s Open Filament Program, for questions on filament settings or compatibility please customize please reach out to 3D Printlife..
Check Stock

FLASHFORGE Creator Pro 2 3D Printer with Independent Dual Direct Drive Extruder for 4 Printing Modes, Metal Frame Structure, Acrylic Covers, Stable & Precise Printing with ABS, PLA, PETG, PVA, Hips

  • 【Independent Dual Extruder】Compared with traditional parallel extruders, the independent dual extruder structure can print copy and mirror models at the same time, and better supports soluble consumable printing. Higher printing efficiency.
  • 【Considerate Machine Design】Fully enclosed body with removable cover to meet the temperature requirements of different strands.
  • All metal frame body with stable structure.
  • Alloy material construction plates with 6.5mm thick alloy material which can be heated, resistant to transformation..
  • 【Residue Scraping Design】In the process of dual printing mode, the filament tends to overflow due to the continuous heating of the nozzle. This design of dual extruder 3D printer Creator Pro 2 helps avoid misalignments in the colors, and get cleaner dual prints..
  • 【Widely Filament Compatibility】240℃ direct drive dual extruder works with PLA, ABS, PVA (print with PLA), HIPS (print with ABS), PETG Filament, support 3rd party filament. CP2 The Best Dual Extruder 3D Printer Choice!.
  • 【Warranty and Service】All FLASHFORGE 3D printers come with lifetime technical support and a one-year warranty. We provide 24-hour online customer service, if you have any questions about the product operation or so....
Check Stock

Ducurt Horizontal Fishing Rod Rack Holders Wall-mounted Fish Pole Holder for Garage & Boat 6-Rod Storage Racks -1 Pair

  • Horizontal 6-rod Racks: The fishing rod holders is 13.6 inch long and 2.5 inch wide, it can hold up to 6 fishing rods. The diameter of the EVA foam is about 0.4 inch, it can fit most of rod sizes, especially ideal for fresh water rods and ice fishing poles..
  • Space Saver: You can easily screw the fishing rod racks to your wall, ceiling, garage or your boat for space saving. Works good for you to keep your fishing rods off the floor and well organized..
  • Wall Mounted Fishing Rod Rack: Each pair fishing pole holders come with 4 quality screws for installation. Just drill one hole in the wall, then level the fishing pole rack in place and screw into the hole and put on the rod racks. The steps will take you about 10 minutes, convenient for both kids and adults..
  • Protective and Secure: Equipped with soft EVA foam assorted in the fishing pole holders, helps protect your valued fishing rods from scratching and keep them from falling down. The foam is elastic, more convenient for you to put on and take down your fishing poles..
  • Two Types Available: There are horizontal fishing rod holder an....
Check Stock

Official Upgraded Ender 3 v2 Ender 3 CR-10 All Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Creality Ender 3 Pro/Ender 5/ CR-10 Series 3D Printer

  • The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus..
  • Works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder..
  • Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy..
  • Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install..
  • 100% brand new and original Creality exturder. If you have any question, please feel free to contact us..
Check Stock

Ducurt Horizontal Fishing Rod Rack Holders Wall-mounted Fish Pole Holder for Garage & Boat 6-Rod Storage Racks -1 Pair Rod Holder Rod Holder

  • Horizontal 6-rod Racks: The fishing rod holders is 13.6 inch long and 2.5 inch wide, it can hold up to 6 fishing rods. The diameter of the EVA foam is about 0.4 inch, it can fit most of rod sizes, especially ideal for fresh water rods and ice fishing poles..
  • Space Saver: You can easily screw the fishing rod racks to your wall, ceiling, garage or your boat for space saving. Works good for you to keep your fishing rods off the floor and well organized..
  • Wall Mounted Fishing Rod Rack: Each pair fishing pole holders come with 4 quality screws for installation. Just drill one hole in the wall, then level the fishing pole rack in place and screw into the hole and put on the rod racks. The steps will take you about 10 minutes, convenient for both kids and adults..
  • Protective and Secure: Equipped with soft EVA foam assorted in the fishing pole holders, helps protect your valued fishing rods from scratching and keep them from falling down. The foam is elastic, more convenient for you to put on and take down your fishing poles..
  • Two Types Available: There are horizontal fishing rod holder an....
Check Stock

CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm fit for Creality 3D Printing Printer CR-10 CR-10S S4 S5

  • Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY.
  • MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS.
  • CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W..
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

Upgrade 3D Printer Parts MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8 CR-10 CR-10S CR-10 S4 and CR-10 S5 Left Hand

  • [UPGRADING] Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable..
  • [REPLACEMENT] MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5.
  • [Easy to use: used] for 1.75mm filament of 3D printer MK8 bowden extruder frame.
  • [Stable and durable] Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original....
  • [Advantage] the metal extruder have better stronger pressure to pushing filament into printer nozzle so will improve the printer's performance. And....
Check Stock

R QIDI TECHNOLOGY i Fast 3D Printer, Industrial Grade Structure, with Dual Extruder for Fast Printing, Super Large Printing Size 330×250×320mm

  • 【Faster printing】Fully industrial-grade structure, using the second-generation Qidi dual Z-axis structure, all of the original motion structure is upgraded to linear guides, with the high temp extruder, the filament extruding is faster and smoother, the printing accuracy is higher .The printing speed is increased by 20%, it is set to print easily at 100cc per hour..
  • 【Freedom in the choice of the filament】 Qidi iFast can print almost all kinds of filaments which suitable for FDM 3D printers on the market, such as PLA ,PLA+ ,ABS ,PETG, NYLON,etc. The iFast 3d printer equipped with a heated chamber, which can be heated to 60°C. The excellent mechanical structure can produce more robust manufacturing-grade parts..
  • 【Freedom in manufacturing of the complex parts】 Qidi iFast is equipped with automatic dual extruder, which can automatically adjust the left and right extruder up and down according to the software. With the PVA (water-soluble) support, it is very suitable for printing manufacturing-level parts with complex structures and realizing precision manufacturing..
  • 【All metal high temp extruder】 Compared with the normal brass nozzles which on the market, it is more durable and prints smoother. The iFast 3d printer is pre-installed with du....
Check Stock

BIQU H2 Extruder V2.0 New Upgraded Dual Gear Extruder 3D Printer Dual Drive Feed Not Stuck for Creality Ender&CR Series Printers Geeetech Anycubic Mega S Printers and Prusa I3 DIY 3D Printer Kits

  • √【Upgraded Gear Is No Longer Stuck】①The design of output gear modulus is changed from 0.5 to 0.25, reducing gear outer diameter,which can....
  • √【The Advantages of Upgraded Stainless Steel Gear】H2 extruder V2.0 is upgraded to new high quality stainless steel output and transmission gears....
  • √【Brand New Titanium&Copper Alloy Heat Break】BIQU H2 extruder V2.0 adopt titanium&copper alloy all metal heat break, the best quality material....
  • √【High Performance Unique Cooling System】The heat sink structure on H2 extruder V2.0 is optimized to ensure airflow is diverted up and away from....
  • √【Wide Compatibility】H2 extruder has wide compatibility for variety 3D printer on the market like Creality Ender & CR Series Printers, Geeetech,....
Check Stock

Official Creality Sprite Direct Drive Extruder Pro Kit with 80N Stepper Motor Direct Drive Upgrade Kit for Ender 3 Ender3v2 Ender 3 pro Ender 3 Max Support 1.75MM Filament

  • Compatible With Ender3 Series - Creality Spirit direct drive extruder upgrade kit compatible with Ender 3, Ender3v2, Ender 3 pro and Ender 3 Max..
  • All Metal Design - With Compact and light weight design, 54x50x64.3mm small size, 288g weight. Creality Spirit direct drive extruder pro kit perfectly....
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N....
  • Dual Gear Feeding, More Stable Printing -The Creality Sprite direct drive extruder adapt double-toothed structure which does not damage filaments,....
  • Support Printing Flexible and High Temperature Filament - With direct drive extruder and up to 300°C all metal hotend kit, the Spirit direct drive....
Check Stock

BESTonZON Clay Gun Extruder Ceramics Pottery Clay Extruders DIY Geometry Noodles Educational Toy for Kids Rose Gold

  • Polymer clay tools practical, used for many craft projects such as polymer clay, ceramic clay,fondant, chocolate, jelly, pudding and so on..
  • Fondant tools stainless steel, fine appearance, with 20 kinds of tips to meet the different needs..
  • Clay extruder tool steel gun body, larger and more solid, scientific pole design, saving human efforts..
  • Fondant extruder can be disassembled into three parts for easy clean with soap and water..
  • Pasta extruder sealed apron, and the gun wall close together, so as not to mud..
Check Stock