ReviewsFord Racing Valve Heads

Juiced - PlayStation 2

  • Race 55 beautifully detailed Ford automobiles - Ford GTs, Thunderbirds, concepts, SVT vehicles, Mustangs and trucks.
  • 26 realistic tracks with interactive scenery - road, off-road, oval tracks and more.
  • Unlock a huge range of game modes, tracks and vehicles as you face each challenge.
  • 6 Player racing online for the ultimate racing experience.
Check Stock

Ford Racing M-6701-B351 Rear Main Seal

  • High temperature resistant Viton® material.
  • 351W from 7/11/83, Ford Racing one-piece seal.
  • Use on Ford Racing 351W blocks manufactured after 6/1/93.
Check Stock

Ford Racing 3 – PlayStation 2 (Renewed)

  • Race 55 beautifully detailed Ford automobiles – Ford GTs, Thunderbirds, concepts, SVT vehicles, Mustangs and trucks.
  • 26 realistic tracks with interactive scenery – road, off-road, oval tracks and more.
  • Unlock a huge range of game modes, tracks and vehicles as you face each challenge.
  • 6 Player racing online for the ultimate racing experience.
Check Stock

Dorman 090-038CD Oil Drain Plug Standard M12-1.25, Head Size 14Mm Compatible with Select Models

  • Important function: The important function of the magnetic drain plug is to attract and help remove the fine metal particles in the crankcase oil, allowing the oil to flow through the engine more easily. High-performance racing cars and street engines rely on these as additional safeguards..
  • Strong protection: The high-strength magnet of the drain valve plug prevents harmful metal scraps from entering the engine. These plugs have a very powerful magnet that can help collect these debris directly from the oil during operation..
  • Engine and oil pan protection: The sealing and anti-vibration mechanism of the engine drain plug can reduce the risk of engine damage due to catastrophic oil loss due to the loss of the drain plug..
  • Easy to install: Our oil drain plug requires no installation tools and can be installed in a few seconds. Before installation, please put the gasket in the groove to prevent the drain pipe from loosening..
  • Applicable models: The replacement of the oil drain plug is perfectly suitable for Ford F150 Raptor, and for Ford Mustang 2015-2019, 14*1.5 models..
Check Stock

Valve Cover Gasket Set - Compatible with 2.0L 2.3L 2.5L Ford Escape Focus Funsion Ranger Transit Connect Mazda 3 5 6 CX-7 MX-5 Tribute B2300 - Replace VS50639R1

  • REPLACeMENT VALVE COVER GASKET - Designed to bring seal to the cylinder head and the valve cover, stops oil from leaking out and spilling onto the....
  • FIT THE FOLLOWING VEHICLES - Valve Cover Seal compatible with 2.0L 2.3L 2.5L Duratec, including 2005-2019 Ford Escape, 2004-2007 Ford Focus, 2006-2020....
  • REPLACE PART NUMBER - Replace Fel-Pro VS50639R1, replace Ford 1S7Z-6584-BA, replace Mazda LF02-10-230, ZZCA-10-230, L501-10-230. Commonly found on....
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine Ford or....
  • WHAT YOU'LL GET - 1 Set of Valve Cover Gaskets & 12 Months Warranty. If you have any problem with our valve cover gasket, feel free to contact us, we....
Check Stock

USA Standard Gear (ZBKF8.8) Bearing Kit for Ford 8.8 Differential

  • Replacement T-5 bearing retainer with steel throw-out bearing sleeve....
  • Fits production and Ford Racing T-5 transmissionsSmoother clutch engagement can be yours with one of these Ford Racing T-5 bearing retainers. The steel bearing sleeve and aluminum mounting flange reduce flex for more consistent....
Check Stock

EGR Valve Pressure Feedback Sensor - Compatible with 1994-2010 FordMercury Mazda Lincoln - Replaces# F77Z-9J460-AB DPFE15

  • ...d - Designed for long service life under harsh under-hood conditions. The sensor is fully sealed and O.E. electrical connectors are used to provide an accurate fit. Every component has passed meticulous quality control to ensure accurate voltage output. It contains acid/gas resistant sensing element..
  • Function - EGR Valve Position Sensors monitor EGR valve operation to provide same flow as OE calibration, helps to reduce atmospheric pollution due to hydrocarbon emissions and reduce to fuel consumption to improve engine efficiency..
  • Compatible Vehicles - Fit for 1996-1997 Ford Aerostar, 1995-2000 Ford Countour, 1994-2000 Ford Crown Victoria, 1996-2002 Ford E-250 Econoline, E-350 Econoline Club Wagon, 2003-2008 Ford Escape, 1997-2004 Ford Expedition, 1996-1998 Lincoln Mark VIII, 1998-2004 Lincoln Navigator, 1996-2000 Lincoln Town Car and 200+ models, please input your make, model and trim level into the Amazon Garage to make sure this part fits your exact vehicle..
  • Replaces Part Numbers - F77E9J460AA, F77E9J460AB, F77Z9J460AB, F7UE9J460AA, F7UZ9J460AA, DPFE15, 1L3Z9J460AA, 3S4Z9P449AA, 98BB9J460AB, E4ZZ9J460B, F6DZ9J433DD, F7DZ9J433AA, AJ9318211, AJ9318215, This EGR Valve Pressure Feedback Sensor is a direct replacement for Ford, Lincoln or Mazda part, ea....
Check Stock

Injector Pressure Regulator Valve 6.0 Powerstroke IPR＆ICP Replacement for 2003-2010 Ford Super Duty F250 F350 F450 F550 E350 E450 Excursion 6.0L Diesel Turbocharged Replaces CM5126 AP63417 5C3Z9C968CA

  • [INJECOR PRESSURE REGULATOR VALVE]Direct replacement failed, encountered unable to start, abnormal idling or jitter, rupture, diesel the IPR valve may have defects to stop the work.IPR valve 6.0 powerstroke and ICP sensor 6.0 powerstroke work together to control the oil pressure of the injector in the high pressure fuel system.The 6.0 powerstroke IPR valve is responsible for controlling the output pressure of high pressure oil pump..
  • [FITS]Replacement for Ford 6.0L V8 Diesel Turbocharged Vehicles,Compatible with 2005-2007 Ford Super Duty F250 F350 F450 F550 ,2005-2010 E350 E450,2003-2010 Excursion..
  • [REPLACE PART NUMBER]5C3Z-9C968-CA, 5C3Z9C968-CA,5C349C968CA,5C34-9C968-CA ,1846057C1,CM-5126,CM-5054,AP63417,HTV102,W3250216.Replacement fits for ford 6.0 ipr valve and ford 6.0 icp sensor..
  • [QUALITY]Our 6.0 powerstroke IPR valve and 6.0 powerstroke ICP sensor replacement pieces are rigorously tested and fully fitted in design. Although this is not a true OEM part, the injector pressure regulator is a direct replacement part of your factory IPR valve and can replace defective IPR and ICP. We are made of high quality materials for long term durability and reliability..
  • [WARRANTY]We provide warranty service. Once there is a problem with the product, do not hes....
Check Stock

Shelby Cobra Square Ford Mustang Hot Rod Sport Car Men's Size Hoodie Sweatshirt, Black, Large

  • Officially Licensed! Shelby mustang cobra car gifts!.
  • Great Gift Idea for Mustang enthusiast Classic car shirt Mustang Gifts for the Holidays!.
  • Heavy weight preshrunk Cotton/poly blend.
  • Great Gift for a guy dad boyfriend husband and any car shelby cobra FORD mustang Fans.
  • Ford mustang racing t-shirt sweatshirts GT ST Racing shelby cobra hoodie gifts car gifts classic american cars Christmas birthdays holidays dad boyfriend husband!.
Check Stock

ATD Tools 5400 Cylinder Repair Kit

  • The Ford Spark Plug Repair Kit is designed to air in repairing Ford Modular Cylinder heads.
  • This is a high quality foolproof way to repair the damaged spark plug threads in a fast and permanent manner.
  • No need to remove the heads to get at....
Check Stock

Actron CP7818 Fuel Pressure Tester Kit,Black

  • Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
  • Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
  • Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
  • Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.
Check Stock