ReviewsForged Butterfly Valve

Kohler Part GP876851 (4 PACK)

  • Includes valve body, pressure balance cartridge, rough-in guide and mud guard.
  • 1/2" Universal NPT & direct sweat inlets & outlets, with stops.
  • Service stops include integral check valves.
  • 5. 0 gpm (18. 9 l/min) maximum flow rate at 45 psi.
  • Single lever design cycles from off through cold to hot.
  • Provides temperature regulation and automatic anti-scald protection.
  • One piece cartridge design simplifies installation and maintenance.
  • Adjustable high temperature limit stop to control maximum water temperature.
  • Requires valve trim to complete installation (sold separately).
  • Forged De-zincification Resistant Brass body provides long term reliability and resistance to aggressive water conditions.
Check Stock

DERNORD Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover ( 4' Tube OD )

  • Tube OD: 4 Inch, Ferrule Size: 102MM, Fits 4 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

DERNORD Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover (1.5\ Tube OD)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit

  • ...and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank colla....
Check Stock

Forged Stainless Steel Diaphragm Valve 316l Tri-Clamp Diaphragm Valve Silicone Seal 1.5 Inch for Controlling Ultra-Pure Sterile Corrosive Or Abrasive Fluids

  • ♛ SPECIFICATION - medium temperature: -10°C~+150°C.
  • sealing material: EPDM, PTPE, silicone resin.
  • surface polishing accuracy um: external Ra .
  • ♛ CONTROL FLUID - This forged/cast stainless steel diaphragm valve is suitable for controlling ultrapure, sterile, corrosive or abrasive fluids..
  • ♛ WORKING PRINCIPLE - stainless steel diaphragm valve is sealed from harsh fluids by high-quality neutral chemical diaphragms for a variety of applications..
  • ♛ APPLICABLE PLACES - The stainless steel diaphragm valve can be used in different fields such as food, beverage, pharmaceutical, biotechnology, semiconductor industry and so on..
  • ♛ THE PACKAGE CONTAINS - 1 valve.If you have any questions, you can contact KOUGER customer service, we will give you a satisfactory answer within 24 hours!.
Check Stock

Butterfly Valve Wafer PN16, Body/disc - cast Iron, seat - EPDM (250°F / 120°C) with Electric Actuator 110V ON/Off (6\ (DN150))

  • Wide Use: It’s a Motorized Butterfly Valve. Suitable for food, pharmaceutical, beverage, cosmetics and chemical industry..
  • Material: High quality 304 Stainless Steel material, strong sealing. Strong acid resistance, not easy to corrosion. Long service life.
Check Stock

Tanstic 12Pcs Valve Spring Compressor with Valve Lapper Set Auto Compression C-Clamp Tool Service Kit with Valve Lapping Grinding Stick Tool for Motorcycle, ATV, Car, Small Engine Vehicle Equipment

  • ... contains everything you need to remove and compress valve springs: 1pc solid valve spring compressor including 1pc wide C-clamp, 3pcs extension screws, and 5pcs pusher adapters in 5 sizes and 1pc hand level, 2pcs valve lappers. Practical set for easier work..
  • 【Valve Spring Compressor】Each component is made from forged steel which guarantees superior strength and hardness, so that our C-Clamp will not bend or twist under the stress of compressing valve springs. Compressor surface is oxide finished for rust- and corrosion-resistance. Quality material for longer service life..
  • 【Practical Size】Multiple adapters and pusher can meet your different auto mechanical needs. Valves for the Following Sizes: 16mm (OD.) 19mm (OD.), 25mm (OD, 30mm (OD.). Also with hard plastic storage case for easy carry, safe storage, and quick organization..
  • 【Valve Grinding Lapping Stick】This tool set helps matching valve seats during the engine top-end is rebuilding. Suitable to aid in cleaning of carbon deposits off valve seats. Hardwood long Easy-grip handle for better control, less fatigue and more productivity. Rubber grinding head is easy to use and wear-resistant..
  • 【Wide Application】Tanstic 12pcs set can be used to easily compress valve springs for removal or ....
Check Stock

275 330 Gallon IBC Tote Adapter,IBC Tote Brass Valve with 5/8' Outlet,2' Coarse Thread

  • The valve is used for plastic container outlet control to prevent liquid from splashing around..
  • It has the advantages of acid resistance, alkali resistance, corrosion resistance, high mechanical strength..
  • Inner diameter input end diameter: 75mm,Operating temperature -20 degrees centigrade ~ 70 degrees centigrade..
  • The butterfly valve introduces foreign technology, is made of high-density polyethylene and other engineering plastics,and is assembled, with novel structure and beautiful appearance..
  • Widely used in chemical process and acid, liquid storage buckets, tanks, container outlet control valves..
Check Stock

Handfly Tire Spoons Tool Set, Professional Tire Changing Kit for Dirt Bike, Motorcycle, Wheelchair, Lawn Mower, Tractor, 3X Tire Spoons, 3X Rim Protectors, 1X Valve Tool, 6X Valve Cores (Basic Sets)

  • UNIVERSAL -- Suitable for removing and installing various sized tires on your vehicles and toys.
  • perfect for motorcycle, dirt bike, ATV, lawn tractor, garden tractor, cars etc..
  • PREMIUM QUALITY -- Durable strong automotive grade drop forged steel offers more leverage and torque power. rustproof, polished chrome finish, provide strong and reliable durability..
  • EXCELLENT USE EXPERIENCE -- Rubber grip handle great to hold, Smooth rounded edges protect your bicycle tire tube and wheel rim from damage..
  • CONVENIENT -- 3X 11.4 inch tire spoons, 3X rim protector, valve tool, 6X valve cores, 8X Valve caps. Tire Spoons for removing and re-installing tires. Rim Protectors is used to protect your wheel rims from being scratched. Also, Free Valve core set and tire valve caps come with the package..
  • WARRANTY - If you have any question about the production, please feel free to contact with us, we will reply within 24 hours. This set supports a full refund or exchange..
Check Stock

Kegco bf ebdck-nt Conversion Kit

  • .... The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6" x 4" door mount drip tray's clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you're done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a drain, so it will need to be emptied manually..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished ....
Check Stock

Valve Spring Compressor, Auto Compression Clamp Tool Service Kit for ATV, Car, Motorcycle,Small Engine Vehicle Equipment,Valve Spring Compressor ToolsAutomotive Tool C Clamp Service Set,10 Pcs

  • ...ings,Suitable for your motorcycle, ATV, UTV, car, and other small engine vehicles and equipment.
  • All collets are 1.75 inches (4.4cm) long with 9.5-inch (24.1cm) maximum jaw openings.
  • Valve Spring Compressor Small Engine, This toolset is used to easily and safely compress valve springs for removal or installation.The forged steel construction of this set provides superior strength and hardness. The C-Clamp will not bend or twist under the stress of compressing valve springs. The oxide finish on the set components resists rust and corrosion. The surface finish of each part is smooth and provides for easy use under high compression..
  • Valve Spring Compressor Tools -come packaged in a high-impact case that holds each part securely. The parts will remain organized and safe while stored or in transport, and the case stacks and stores away conveniently.1 x Spring Compressor ""C"" Clamp ,5 x Adaptors ,3 x Extension Screws ,1 x Compression Bar ,1 x Storage Case.
  • Solid Valve Spring Compressor Kit to effortlessly reset your valve springs. The Orion Kit comes fully stocked with 5 collets to fit hundreds of makes and models, such as motorcycles, ATVs, cars, and other small engines..
  • Valve Spring Compressor Set included:(5) Metric collets – 16mm, 19mm, 23mm, 25mm, 30....
Check Stock