ReviewsForged Coupler

Kegco Deluxe Tower Kegerator Conversion Kit - No CO2 Tank - DTCK-542_NT

  • ...features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 12″ SURFACE MOUNT STAINLESS STEEL DRIP TRAY: Designed with style and convenience in mind, this drip tray is constructed from 100% stainless steel and has an attractive brushed finish that will look great on any kegerator. It is dishwasher safe and features a detachable grill for easy cleaning. Because it does not come with a drain, this drip tray is perfect for use where running a drain would be difficult..
  • SINGLE FAUCET STAINLESS STEEL DRAFT BEE....
Check Stock

Kegco Deluxe Tower Kegerator Conversion Kit w/ 5 lbs Co2 Tank - EBDTCK-542_5T

  • ...features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • STAINLESS STEEL SINGLE FAUCET DRAFT BEER TOWER: Popular for outdoor or commercial applications, this top-of-the-line NSF approved 3″ diameter draft beer tower has a beautiful polished stainless steel finish and comes complete with a chrome plated brass faucet with solid brass lever. 5′ of 3/16″ clear beer tubing with nozzle and hex nut assembly and a mounting gasket with screws are also included for quick and easy setup..
Check Stock

Kegco Hombrew Kegerator Conversion Kit, Single Faucet, None

  • kegco standard homebrew kegerator conversion kit includes everything you need to convert a refrigerator or freezer into a homebrew kegerator.
  • kegco dual gauge regulator displays both psi and co2 volume and features a large, easy-to-use adjustable knob.
  • the complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock cornelius pepsi kegs.
  • kegco's nsf-approved beer faucet features a forged brass body and highly polished chrome finish, and includes a sleek black faucet knob.
  • includes an empty 5 lb. aluminum co2 tank made from high strength aluminum alloy, which is lighter than steel and will not rust.
Check Stock

Kegco Deluxe Door Mount Kegerator Conversion Kit with 5 lb. Co2 Tank EBDCK-5T

  • ...features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6″ x 4″ door mount drip tray’s clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you’re done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not ha....
Check Stock

Kegco MPK199B-G Guinness Dispensing Kegerator with Black Cabinet and Door

  • ...MPLETE GUINNESS KEG TAPPING KIT: This Kegerator is equipped with a complete direct draw kit for U system domestic kegs, which includes brands like Harp and Kilkenny in addition to Guinness. The kit includes a brand new 15 cu. ft. aluminum Nitrogen tank, a double gauge Nitrogen regulator, a U system lever handle keg coupler, and a 3" diameter polished stainless steel draft tower with a chrome plated stout beer faucet..
  • CHROME PLATED STOUT BEER FAUCET: To allow you to properly pour a glass of Guinness with that famous and unique head, we've included a specialty European Stout Beer Faucet with the dispense kit. This faucet operates by pulling forward and down on the tap handle. A restricted spout with a tiny restrictor disc helps slow down the pour and allows the beer to pour properly, and the disc can be removed if you need to pour a regular beer from the faucet..
  • "U" SYSTEM LEVER HANDLE KEG COUPLER: This kit comes with a commercial grade lever handle keg coupler that is compatible with all U system kegs, including Guinness, Harp, and Kilkenny kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is squeeze the handles together and then push down on the lever handle to properly couple the ....
Check Stock

MASTERCOOL HVAC Digital Manifold Complete Kit with 72 Standard Hoses MSC-99772-A

  • HIGH QUALITY: High quality rubber make the AC Diagnostic Manifold Gauge Sets Shockproof and shatter-resistant. Aluminum forged MANIFOLD body with (3)....
  • GAUGE PRESSURE RANGE: Burst pressure: 600-3000Psi working/bursting pressure. Blue gauge (low): 0-350 PSI.
  • QUICK DISCONNECT COUPLERS: High & Low pressure fittings included.
  • Each coupler have a shut off valve to prevent loss of refrigerant.
  • CONTENTS: Include 3-Colored 5 Ft/60 Inch Red/blue Charging Hoses, 1/4 Sae fitting on both sides for Red & blue, 1/2 Acme fitting on both sides for....
  • APPLICATION: R134A Professional Manifold Gauge Set. Ideal for R134A, R404A, R407 refrigerants.
  • Designed for AC Freon charging, evacuation (vacuum),....
Check Stock

bROK Products 32973 Coupler 2\ Ball, 3\ Channel - 3500 lb.

  • PRECISE FIT. This trailer coupler is designed to mount onto a 3-inch wide trailer tongue beam and couple to any standard 2-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 2 trailer coupler and has a capacity of 3,500 lbs. gross trailer weight and 500 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock

CURT 25217 Black A-Frame Trailer Coupler, 2-Inch Hitch Ball, 7,000 lbs

  • PRECISE FIT. This trailer coupler is designed to mount onto an A-frame trailer tongue and couple to any standard 2-5/16-inch diameter trailer ball.
  • EASY OPERATION. Equipped with an easy-lock latch mechanism, this trailer hitch coupler is quick and simple to operate and offers a snug fit on the trailer ball.
  • SECURE COUPLING. The easy-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 4 trailer coupler and has a capacity of 10,000 lbs. gross trailer weight and 1,500 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this A-frame tongue trailer coupler is finished in a durable black powder coat and makes a great boat trailer coupler.
Check Stock

CURT 25100 Straight Tongue Trailer Coupler for 3-Inch Channel, 2-In Hitch Ball, 5,000 lbs

  • PRECISE FIT. This trailer coupler is designed to mount onto a 3-inch wide trailer tongue beam and couple to any standard 2-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 3 trailer coupler and has a capacity of 5,000 lbs. gross trailer weight and 700 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock

EZ Snap Covers 9 Foot Long Standard Height 7 1/2″ Baseboard Heater Cover Kit with 2 Closed End Caps

  • EZ Snap Covers are 20 gauge galvanized steel with white epoxy powder coating. They are guaranteed never to rust and are 18% thicker steel than all comparable baseboard heater covers. End caps are 18 gauge thickness..
  • Our covers fit 95% of all existing hot water baseboard radiator heaters. Installation takes five minutes, requires no power tools, and saves you on pricey contractor bills..
  • Lengths over 8’ include a coupler to join the panels together. 8’ will be 2 4’ covers and a coupler, 9’ is 1 4’ and 1 5’ cover and a coupler.
  • 10’ is 2 5’ covers and a coupler, 11’ is 1 5’ and 1 6’ and a coupler.
  • 13’ is 1 6’ and 1 7’ and a coupler.
  • EZ Snap Covers have a lifetime warranty against rust. If they rust, send them back and we will replace them..
Check Stock

CURT 25128 Straight Tongue Trailer Coupler for 2-Inch Channel 1-7/8-In Hitch Ball 2,000 lbs

  • PRECISE FIT. This trailer coupler is designed to mount onto a 2-inch wide trailer tongue beam and couple to any standard 1-7/8-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 1 trailer coupler and has a capacity of 2,000 lbs. gross trailer weight and 200 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock