ReviewsForged Steel Bench Vise

Bench Vise, Portable Work Bench Clamp Vise with Tilts Rotate 360°, 3" Home Table Vise Clamp-On for Woodworking, Drilling, Sawing, Jewelry Making

【Universal Table Vise】This 3-inch universal bench vise has a jaw width of 3 inches/79mm and an opening of 2 inches/51mm. Clamps to surfaces up to 2 inches thick..
【Sturdy Material】The portable bench vise is made of heavy-duty aluminum, this table vise offers incredible strength for gripping objects with ultra durability..
【Multifunctional Use】The adjustable vise is suitable for woodworking, jewelry, hobby, model making, electronics and other fields to fix small parts..
【Rotatable Design】Universal bench vise head rotates 360 degrees and tilts 45 degrees to hold securely at any angle..
【Easy to Install】The oval base can be easily and quickly mounted on the desk without any tools..

Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

MADE IN USA – The bench vise jaw re-imagined from the ground up and built to a higher standard in the USA. New design innovations unique to Frictionworks non-marring soft jaws and a limited lifetime warranty..
SUPERIOR HOLD – 8 N48 spec Neodymium rare earth magnets force rated at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise..
EXCLUSIVE MAGNET RETENTION SYSTEM – The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching,....

Check Stock

PONY Bench Vise 5 Heavy-Duty Utility Combination Pipe Home Vise Swivel Base Bench for Woodworking One-Pair Vise Jaw Pad Included

Multi-Jaw Function: This Multi-Jaw is applicable for clamping flat material, pipe and tube. Anti-slipping, avoid scratches and damages to items that....
Strong Iron Construction: The 5" bench vise features with a solid gray iron construction, more durable and harder than others bench vise that made of....
Stable Bench Vise: It is easy to install on your bench, simple and features with 4 fixed mounting tabs to help secure the bench vise on the table.....
Swivel Feature: 360 degree swivel design. It also features a swivel base, and allows an ever greater degree of accuracy while you are working with a....
Large Capacity: Anvil Area: 2-3/4 inch * 2-3/4 inch, Throat Depth: 3-1/2 inch, Jaw Opening: 4 inch, Jaw Width: 5 inch. Reach up to 3968 lbs. of....

Check Stock

Bench Vise 3' Cross Slide Vise Flat Vise Bench clamp Drill Press Vise Clamp Metal Milling Vise Cross Sliding Vise Benchtop Vise

【Size】Maximum jaw is 2.73in, that is 80mm, and vise specification is 3in, which is very convenient.The handwheel has 0.1 mm increments marked by the machine for maximum accuracy. X direction adjustment is 80 mm. Y direction adjustment is 67mm..
【Industrial Strength】With durable high-density aluminum alloy structure, the bench vise is very durable and sturdy.With high-strength accuracy screw, the bench vise is not easy to slip or deform..
【Hand Tool with Rotating Handle 】2 rotatable handles can adjust vise front and back, bolt fixing slot can be fixed..
【Silicone Protection】The gripper is equipped with a removable silicone pad, which can better protect the workpiece during operation..
【Easy to Use】The vise can be used with drill stand and bench drill, etc. Vise is suitable for woodworking and metal processing..

Check Stock

Mophorn Screw Bench Chain Vise 1/8 to 5-Inch Pipe Capacity, Heavy Duty Bench Chain Pipe Vise with Crank Handle, Neoprene-Coated Jaw, Cast Iron Material Ideal for a Variety of Pipes

Large Holding Capacity: The pipe bench vise features a large pipe capacity, used to hold 1/8-inch to 5-inch pipes(3.2 mm-127 mm). The vise can clamp tubes easily and smoothly within the diameter range..
Solid & Durable Frame: This 5-inch pipe vise is designed with a rugged cast iron base, neoprene-coated jaws, and a heavy-duty chain, which ensures superior stability and durability for extended service life..
No-Fatigue Operation: With a crank handle, you can efficiently operate this home bench vise. You can use the handle and steel chain to fix pipes tightly and hold pipes firmly in place..
Easy Installation: The chain clamps for pipes can easily and quickly be mounted to any secure surface like a workbench, truck, or a tripod stand. It is compact and lightweight..
Wide Application: The vise grip pipe clamps are suitable for fixing and bending large pipes and other bulky material, widely used in the industry or household..

Check Stock

DCT Bench Holdfast Woodworking Tools – 8in Bench Holdfast Clamps Woodworking Bench Holddown Clamps 2 Pack

USE WITH YOUR WORKBENCH: Works best on workbenches with a 2.5 (6.4cm) thickness.
Drill 3/4 inch (1.9cm) vertical dog holes into your workbench top and slide your holdfast workbench clamps into the hole.
We suggest filing the shank to increase hold security.
PERFECT SIZE FOR YOUR NEEDS: Constructed of drop-forged steel provides these hold fast clamps with maximum durability and strength.
8-inch(20.3cm) length with 3/4-inch (1.9cm) diameter shaft fits your workbench.
Shepard hook design offers a 4-inch (10.2cm) perimeter reach for versatility.
Hook features 1.3 by 1.3-inch (3.3 x 3.3cm) square end that will not mar your workpiece.
QUICK AND EASY CLAMPING: Slide the bench hold down clamp into your workbench dog hole.
Press the tip of the hook against your workpiece and firmly tap the crook of the holdfast with a wooden or rubber mallet to jam the shaft tightly in the hole.
When you are ready to release the clamp, strike the backside of the vertical shaft to unjam it from the hole.

Check Stock

Yost Vises M7WW Rapid Action Woodworking Vise | Quick Release Lever for Quick Adjustments | 7 Inch Jaw Width | Made with Heavy-Duty Cast Iron | Blue

WOODWORKING VISE: The Yost Vises M7WW 7-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
TECHNICAL SPECS: Jaw Width 7" (17.78 cm), Jaw Opening 8" (20.32 cm), Throat Depth 3" (7.62 cm)..
HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close and turn the vise handle counterclockwise. To use the quick-release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual..

Check Stock

TEKTON 4 Inch Swivel Bench Vise | 54004

Includes 1-pc. 120-degree swivel bench vise: 4 in..
Cast iron construction (30,000 PSI tensile strength) with replaceable serrated steel jaws holds work with a sure, nonslip grip.
120-degree swivel base with dual lock-down nuts positions workpiece where you need it.
Three mounting holes anchor vise securely to workbench.
Polished steel anvil offers a smooth, consistent work surface for shaping metal pieces.
Acme-threaded screw glides smoothly without binding.
Requires three 3/8-inch diameter bolts (not included) for mounting.

Check Stock

Eclipse Professional Tools EWWQR7 7" Quick Release Woodworking Vise

Body and sliding jaw are from high quality grey cast iron and this material has excellent shock absorbing qualities.
Slide rods and main screw from steel with a single start thread.
Fitted with an adjustable front stop (dog) which gives an additional clamping facility when used in conjunction with a bench stop, this also provides a nromal vise and a tail vise in one tool.
Quick release trigger to open and close the vise quickly without using the main screw.
For added safety, the tommy bar will bend before the vice becomes over-stressed.

Check Stock

Yost Vises 34C Combination Vise | 6 Inch Jaw Width Heavy-Duty Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Ductile Iron | Blue

COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
TECHNICAL SPECS: Jaw Width 6" (15.24 cm), Jaw Opening 10" (25.4 cm), Throat Depth 7.5" (19.05 cm), Min Pipe Capacity 0.25" (0.635 cm), Max Pipe Capacity 6" (15.24 cm)..
SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....

Check Stock

POWERTEC MT4006V Deluxe Bamboo Workbench Top | Portable Project Center and Vise Tool w/4 Bench Dogs

INCLUDES: (1) Portable Bench Tool Stand with Bamboo Table Top, and (4) Bench Dogs.
FUNCTION: This multi-functional workbench tabletop accommodates a wide variety of woodworking projects, including clamping, cutting, painting and can used as a vise tool or sawhorse.
PREMIUM FEATURES: A portable design with fully adjustable vise panels for project versatility, a built in storage rack for your tools, plus an imprinted metric and protractor scale for optimum accuracy.
BUILD: Flaunting a heavy duty steel frame and premium bamboo work top, this foldable work stand weighs an impressively lightweight 11 pound construction.
WEIGHT CAPACITY: Able to hold up to 220 lbs.

Check Stock