ReviewsForging Steel Grinding Ball

Raizi 7 inch Universal Surface Grinding Dust Shroud Hand Angle Grinder+7 inch Diamond Grinding Cup Wheel

  • 7inch Dust shroud + 1 Pc 7inch diamond grinding cup wheel+1 Pair earplug+1 Pair gloves.
  • Flexible brushs are springs under the bristles, so that the height of the bristles can be adjusted to fit the grinding wheels of different heights..
  • Steel ball inside. It is easier to slide the cover without getting stuck due to dust accumulation.Removable piece for grinding close to walls.
  • 7inch: Suitable for Bosch, Makita, Dewalt, Kress, AEG, Metabo, Milwaukee etc 80% Main Brand 7"/9" Angle Grinder,but not recommended for the easy lock angle grinder,and don't fit the HILTI brand grinder..
  • Raizi diamond cup wheel is designed for surface preparation, concrete& terrazzo floor correction and grinding.It combines superior diamonds, extremely durable..
Check Stock

Yongli Sword Blue Exorcist Sword Ao No Exorcist Rin Okumura Kurikara Japanese Anime Cosplay Replica Game Carbon Steel

  • ...at-absorbing cotton wires. The scabbard is wooden too, bearing patterns which make the product more beautiful..
  • The material of the blade is (Damascus steel material), which gives the blade high hardness and toughness. We have made different color treatments to the blade, and then created irregular texture by manual grinding, because of which the blade looks distinctively beautiful. We forge our military swords following the traditional craftsmanship. All processes, from material selection, forging, quenching, polishing, to grinding, etc., are done by hand..
  • What you need to do is cleaning it with cloth or tissue.in Daily use, you also should pay attention to maintenance the product.Try not to touch the water. Once it touches the water, you must clean up the water. Avoid remaining moisture on the blade.Be careful do not place in a place where it is wet and in direct sunlight..
  • Overall length:103cm/40.55inches. handle length:26cm/10.24inches.blade length:71cm/27.95inches.Weight:1.25kg/2.75Ib. Hardness:55HRC.
Check Stock

Paring Knife,3.7 inch Fruit and Vegetable Paring Knives,Stainless Steel Super Sharp Small Kitchen Knives Sets,Assorted Colors Handle(Set of 4)

  • Premium Material: Eocogup pairing knife use high carbon stainless steel (4Cr14) and 1.5mm blades thickness forging.It will be more durable than conventional 1.0mm blades..
  • Dishwasher Safe: Peeling knife clean up nothing would stick to them at all, so tossing kitchen paring knife in the dishwasher was perfect without damaging paring knives either! Without breaking down or dropping.After cleaning, please use the holder instead of the sheath that is most likely to rust the stainless steel knife..
  • Special Process:The process of the paring knives set of 4 Smooth the rough steel surface and achieves the most exquisite state through deep grinding on both sides.More sharper,more durable..
  • Comfortable to Hold: Eocogup pairing knives kitchen is not one of those cheap, super light knives.A bit heavy on the handle but not bad and easy to hold making things a lot quicker.It sliced into the tomato without any effort..
  • Lifetime Warranty:100% satisfaction or money back guarantee,try it risk free,we know you'll love kitchen paring knife!.
Check Stock

uxcell PHSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Female Thread Right Hand

  • Type: 1/2" Hole x 1/2-20 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensure long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Male Thread Right Hand

  • Type: 1/2" Bore x 1/2-20 right-hand male thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearing 3/8-inch Bore Pre-Lubricated Bearing 3/8-24 Female Thread Right Hand

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

Vertical Plate Lifting Clamp 3T - Industrial Steel Hoist Hook Chain 6614lbs Jaw Opening up to 1.2 Inch for Lifting and Transporting

  • Stainless steel forging, body casting process.
  • High-frequency quenching of jaws, wear-resistant.
Check Stock

Carbide Burr 1/4" Shank, SF-3 Tungsten Double Cut Rotary Die Grinder Bits - Cutting Burrs for Milwaukee, Dewalt and Makita Die Grinder Accessories - Wood Carving Metal Working & Sturdy Storage Case

  • ✔️[TOP QUALITY MATERIAL]Our rotary tool accessories are made with premium carbide tungsten steel, a highly durable material which is guaranteed to withstand the test of time. With a double cut tooth angle which prevents chipping, this tungsten carbide grinding file is superior to any high speed steel burrs..
  • ✔️[HARD WARING BURRS]Our rotary cutter includes everything you need for cutting, shaping, grinding, polishing and removing sharp edges, being compatible with ferrous and non-ferrous metals, wood, plastic and even stone..
  • [PROFESSIONAL RESULTS] Unlike similar products on the market, these die grinder bits provide a faster cutting time, being suitable for cleaning trimming, veining and weld joint of casting, porting tools, forging and finishing all kinds of metal and non-metal mould..
  • ✔️ [PRACTICAL & EASY TO STORE]Order this rotary grinder burr bit and you’ll receive a great storage box for easy transportation and safe keeping! No more misplacing or losing your deburring bits, keep them accessible and within immediate reach every time you need ....
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Right Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Left Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 left-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB4 Rod End Bearings 1/4-inch Bore Pre-Lubricated Bearings 1/4-28 Male Thread Right Hand 2pcs

  • Type: 1/4" Bore x 1/4-28 right-hand male thread rod end. Maximum angular misalignment: 13 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 6.6KN Static Load Capacity, 4.5KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock