ReviewsForging Steel Tire

4 Pieces Set of 7.5 and 8.5 and 9 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife Set, 3 to 4.5 inches Cutting Edge, Compact Pocket Knife Blanks

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 33 inches Damascus steel blade..
  • Set Contains: a) 9" long straight back blade with 4" cutting edge. 3 pins holes and a Mosaic hole. b) 8.5" long trailing point blade skinning knife with 3.5" cutting edge. 3 pin holes and a Mosaic hole. c) 8.5" long pocket drop point blade with 3.5" cutting edge. 3 pins holes and a Mosaic hole d) 7.5" long compact trailing point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

15' Long hand forged Damascus steel Eagle Kukri Knife, 10 inch long full tang blade, Bull horn scale with steel bolster, Cow hide Leather sheath with belt loop

  • 15" Long hand forged Damascus steel full tang blade Eagle Kukri Knife. Full tang blade goes through all the handle as well in a single piece so full tang blades are durable and stronger than non full tang blades.
  • Natural Bull horn scale with steel bolster. Handle Length is 5 inches with inserting hole. Up to standard Eagle Kukri Knife Comes with a fine quality extra thick and robust leather sheath.
  • Up to standard Eagle Kukri Knife comes with a fine quality extra thick and robust leather sheath that has belt inserting loop..
  • Approximately 6 mm Thick Twist pattern Damascus steel. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel . The sheath has belt inserting loop and can be worn on belt.
  • Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

Staple Removers Staple Pull Office Staple Removal Tool Hand-held Comfort and Energy Saving, no Damage to Paper(Pink and Blue)

  • Package includes--one pack is blue color,and the other is pink color staple remover.
  • Steel forging high hardness, good toughness, strong and durable, will not rust,non-slip plastic handle,Staple remover tool--suitable for office,school and home using.
  • Product quality 100% guarantee,YUEKUI provide the most perfect after-sales service, please rest assured to buy..
Check Stock

PoLe.Craft Life Hunting Knife Forged Boning Knife Cleaver 7-Inch - Wilderness Kitchen Knife - Forged 1095 High Carbon Steel 60HRC,For Outdoor Kitchen Cooking Camping with Sheath

  • ✅Forged USA1095 High Carbon Steel - Sharp and Durable: This is a classic and practical butcher knife. It is made of USA1095 high carbon steel through manual forging process. 1095 high-carbon steel is a special steel for professional knives in the United States. It has excellent cutting performance. The chopping knife made by the forging process have higher hardness and excellent toughness. And there is a natural carbonized layer on its surface, which can protect the hunting knife from rust..
  • ✅Chopping and Cutting Dual Purpose - Classic-Sharp-Practical: This kitchen knife has been carefully optimized in shape, moderate in size, moderate in weight and good in hand. It is very suitable for chefs to slaughter, chop bones, cut meat, fish, etc. You can cut meat or chop bones, one knife is multi-purpose, convenient and practical. With high-quality leather knife sheath, it is very suitable for outdoor camping and carrying..
  • ✅Handle Is Ergonomically Designed: The forged butcher knife has an ergonomic handle shape, the handle is full, and the grip is comfortable. Even in a humid environment, it can be held firmly without slipping. The integrated handle is not welded and is fixed by three stainless steel rivets, which is very firm..
Check Stock

4 pieces Damascus steel blank blade set, 7, 8, 9 and 9.5, inches long hand forged blank blade skinning knife set, 2.5 to 4.5 inches long cutting edge, compact pocket knife and skinning knife blades

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 32 inches Damascus steel blade..
  • Set Contains: a) 9" long trailing point blade with 4.5" cutting edge. 3 pins holes and a Mosaic hole. b) 9" long drop point blade skinning knife with 4" cutting edge. 3 pin holes. c) 7" long pocket spear point blade with 2.5" cutting edge. 3 pins holes and a Mosaic hole d) 8" long compact straight point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

Christian Culture - The Game of Christian Conversations Fun & Thought-provoking Conversation Starters About God Christianity and Life.

  • Easy to install: chain joints for the magic buckle, easy to disassemble, easy to clean, reusable  .
  • Strong Rally: Special forging steel, repeated forging, strict control of materials to ensure the strength.
  • Smooth lubrication: surface polishing, internal oiling.
  • Accurate matching: professional equipment test spacing, professional and technical test data  .
Check Stock

1095 Steel Flat Stock for Knife Making Billets 12 x 1.5 x 1/8 Inches, High Carbon Knife Blank for DIY Knife Blade Making Blacksmithing Tools(1 pack)

  • Reliable and Tough: these knife making tools are made of 1095 high carbon steel, featuring good chip resistance and nice edges, easy to sharpen, which are suitable for forging, removing and welding materials.
  • Sufficient Room for DIY: the 1095 steel flat stock measures approximately 30 x 3.8 x 0.32 cm/ 12 x 1.5 x 0.13 inches, providing plenty of room for you to customize the steel according to your condition.
  • Wide Ranges of Applications: 1095 steel is the highest carbon grade and provides a good heat processing effect, making it proper for blades, knives, hand tools, gaskets, and so on.
  • Memorable Handmade Souvenir: the forging steel bar stock can be applied for experienced people and amateur use.
  • You can use them to make a handmade knife for yourself or your family and friends, which would be memorable.
  • Adequate Quantity: you will receive 1 pack of knife making billets, and each piece has enough space to adjust, sufficient to meet your daily use and replacement needs.
Check Stock

6Pcs HVAC Tools Swaging Tool Drill Bit Set Multifunction Copper Pipe Flaring Tool Air Conditioner Copper Tube Expander Swaging Tool with 7/8 3/4 5/8 1/2 3/8 1/4 Bits

  • Multi size: 6 different sizes per set of your choice to meet your needs..
  • Material: Made of bearing steel. It has high and uniform hardness and wear resistance, and high elastic limit, your good helper for work and life..
  • Precision: The flares will always have the same size and will fit perfectly.
  • The swages present a perfect depth and a tight fitting, that will make....
  • Perfect Forging Depth: A full range of forging tools makes it easy to expand HVAC tubing, the forging plug will provide a large exchange depth for a....
  • Function and easy to install: When the air conditioner is installed, expand the copper tube, make two mutual copper tubes. (To be installed in manual....
Check Stock

OAKSWARE Chef Knife, 6\ Cutting & Cooking Kitchen Knife - High Carbon German Steel Razor Sharp Knives Professional Meat Knife with Ergonomic Handle

  • [Traditional Japanese Hand Forging] Professional Japanese chef's knife inherits the traditional Japanese hand forging method.
  • combined with advanced technology and materials. Through the knifemaker's manual fine knife shape and pounding out the gorgeous pounding texture.
  • into the perfect forging art and craftsmanship. Insist on completing a perfect kitchen chef's knife through 45 days of hand forging..
  • [High Quality Cooking Chef Knives] Kiritsuke chef knife is made of 3 layers of top grade 9CR18MOV high carbon steel with precision quenching and vacuum cold nitrogen treatment. It greatly enhances the characteristics of corrosion resistance, rust prevention and toughness.
  • the hardness is up to 58±2HRC. 2.5mm ultra-thin sharp blade can keep the ideal ripeness of fruits, vegetables in the best condition and meat in the most delicious moment when cutting..
  • [Solid Rosewood Knife Handle] The Japanese high carbon knife is made of precious summer sourwood wood from Southeast Asia. And features an ergonomically designed octagonal balanced wood handle.
  • minimizing wrist tension and different aspects giving you great flexibility to adjust your cutting angle.
  • while providing a secure, comfortable grip..
  • [Perfect Cooking Cookware Gift Choice] Japanese knives combine ....
Check Stock

Blacksmithing 4LB Bladesmith Handmade Forge Hammer Anvil Hammer Metal Forged Knife Making Blacksmith Forging Tools

  • 【Must Have Tool】The 4LB Forging Hammer is an ideal forge tool for any blacksmith / farrier / knife maker or tool collector. It has excellent results in metal forging, knife making and other forge work..
  • 【High Strength Hammer Head】Manufactured from high strength heat treated steel, the hammer head is super sturdy and can provide a very large knockout force when forging. After quenching treatment, its density and strength are greatly increased, and the hammer body is more solid and not deformed. Features with high temperature resistance, good wear resistance and long using life. Saving time and money..
  • 【Premium Wooden Handle】The wooden handle is made from premium wood, strong and durable. Using mechanical handle design, the middle to do recessed processing, not only non-slip oil-resistant, but also beautiful and comfortable..
  • 【Special Embedding Technology】With special embedding process, the hammer head and handle are tightly connected and not easy to fall off, which effectively improves the working efficiency..
  • 【100% Satisfaction Guarantee】The johntruck Team aims ....
Check Stock

FODCOKI Hand Forged Chef Knife 8 inch Japanese Gyuto Kiritsuke Kitchen Knife- Razor Sharp Professional for Meat Small Bone Cutting- German High Carbon Steel- Wooden Handle

  • TRADITIONAL HAND FORGING: FODCOKI kitchen knives retain the traditional hand forging and combine it with modern high-quality materials. Each Japanese Gyuto knife is made by experienced craftmans. The 8" cutting knife is suitable for home cooks and professional chefs, also a great gift for knife collectors.
  • HIGH-QUALITY MATERIALS: Made of premium High Carbon Steel, through low-temperature cold pressing and quenching refining, the Rockwell hardness reaches 56±2 HRC, which means that the rust-resistance, sharpness, durability and hardness of the 8 inches cooking knife reach an excellent balance.
  • MATURE FORGING PROCESS: Each Japanese chef's knife is hammered to form a unique texture, finally is polished and the angle of blade edge sharpened to 12-15 ° by craftsmen to make the knife have razor sharp performance. You can easily handle kitchen foods of chopping, slicing and dicing, like sushi, fruits, vegetables, meat, fish, chicken, and beef etc. Also can cut the small bones.
  • SOLID HANDLE: The combination of German high carbon steel and black solid wood creates this lightweight, luxurious and artistic kitchen forged knife. The ergonomically designed wooden handle is expensive, burr free, comfortable and durable. You don't have to worry about fading, crackin....
Check Stock