ReviewsFormula 1 Pneumatic Valves

5pcs/set Pneumatic Muffler 1/8\ NPT Brass Body Valve Thread Adjustable Silencer Noise Exhaust Thread Flat Head Pneumatic Air Flow Speed Controller

  • Working Pressure: 0-1.6 Mpa.External thread size: 9.5±0.2mm.
  • This muffler is made of high quality copper and iron material,durable to use.
  • The silencers are used to reduce dynamic noise of the pneumatic components or device exhaust.
  • Easy installation and high noise reduction result, quick and reliable connections.
  • Widely used for valves, cylinders,oil tanks, air tools and some other systems that need mufflers to clean the exhaust air and reduce the noise.
Check Stock

Check Valve 3/8 Inch 10 mm ABS Plug-in Check Valve Fuel Oil Water Gas Air One-Way Check Valve for Liquids and Gases 6 Pieces

  • Material: this check valve is made of ABS plastic, and the internal valve core is made of silicone, ABS plastic has high hardness, good heat resistance and corrosion resistance, strong resistance to acids and alkalis, and is resistant to organic solvents to some extent.
  • Suitable size: you will get 6 no-return check valves with a size of 3/8 inch, which is 1.61 inches long, enough quantity to meet your use of check valves in different situations to prevent fluid backflow.
  • Function introduction: 3/8 check valve is applied in fluid system to prevent fluid backflow, or applied in pneumatic system to prevent compressed air backflow.
  • This check valve can be applied in the temperature range of -20 degrees Celsius to 70 degrees Celsius.
  • Widely use: one-way valve can be applied in water process, air purification, automobile parts, machinery industry, household appliances, etc., to effectively prevent backflow of the medium.
  • Note: when installing the check valve, pay special attention to the flow direction of the medium.
  • The normal flow direction of the medium should be consistent with the arrow direction indicated on the valve body, otherwise the normal flow of the medium will be cut off.
Check Stock

ANPTGHT One Way Check Valve 1/8 3MM Hose Barb Non Return Ozone Resistance Plastic Valve for Water Fuel Oil Air Gas Pack of 3

  • 【Material】 Plastic barb connector, made of high-quality PVED material.
  • 【Size】 1/8" OD One Way Check Valve，Can fit 1/8" hose ID.
  • 【Function】The check valves are applicable for fluid systems to prevent countercurrent liquids, or for pneumatic systems to prevent reverse flow of compressed air..
  • 【Performance】Hose barb check valve’s Opening pressure: 0.5 Kpa, Maximum back pressure: 300Kpa. Normal performance under 25 ℃ to 60 ℃,Strong resistance to acid, alkali, salt corrosion ability.
  • 【Design】The check valve is designed with a non-slip card slot inside, which has strong adsorption performance, prevents falling off, non-toxic, and has air tightness..
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...in plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount....
Check Stock

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock

JACO ThreadPro PTFE Thread Seal Tape - 1/2\ x 100 ft. (Mega Roll) | Professional-Grade Thread Sealant (Cool Gray)

  • [1 PACK] Professional-grade teflon tape offers an air-tight, leak-proof seal to the threaded joints of pipes, valves, & fittings - including those made from brass, aluminum, stainless steel, galvanized steel, iron, copper, PVC, plastic & more..
  • High-density PTFE tape is built to last from ultra thick & durable materials for countless industrial & commercial applications - including automotive, plumbing, air compressor tools, gas & water lines, hoses, shower heads, temperature gauges, and more..
  • More bang for your buck - our "Mega Roll" features 100 ft. of professional-grade (1/2 inch width) plumbers tape that is guaranteed to last longer, seal stronger, and outperform any other thread sealant tape available..
  • Non-sticky & easy-to-use sealing tape offers unmatched leak protection with only 3 wraps - no curing time needed. Won't leak, crack, harden, or fall apart with heavy duty use - guaranteed..
  • 100% Lifetime Warranty by JACO - order today with confidence from the #1 most trusted name in industrial pneumatic tools & accessories!.
Check Stock

uxcell Nitrile Rubber O-Rings 44mm OD 40mm ID 2mm Width, Metric Buna-N Sealing Gasket, Pack of 10

  • [Size] - 4mm(0.16 Inch) OD, 1mm(0.04 Inch) ID, 1.5mm(0.06 Inch) Cross-Section Diameter.
  • [Advantage] - Durable fluorine rubber with resistance to heat, oil, aging, abrasion, ozone, fuel and chemical.
  • [Feature] - O-ring round in cross-section to provide a seal between cylindrical overlapping surfaces. They are commonly seen in engines, flanges, valves and so on.
  • [Application] - Fluorine rubber O-ring provides sealing and prevents leaking for a wide range of applications such as plumbing, machinery, hydraulic and pneumatic repairs, etc.
  • [NOTE] - Please confirm the required size and material before purchase, and install it in the right place.
Check Stock

141 PCS Rubber Sealing Washer Kit with 225 PCS Faucet O-Rings Gasket Seal Assortment Set,34 Different Assorted Sizes

  • WHAT YOU WILL GET :You will get 1 set of 141pcs plumbing gasket assortment kit in 16 different sizes ,1 set of 225pcs O ring sealing gasket kit in 18 sizes. Metric specifications for range of household, hydraulic, industrial and pneumatic applications..
  • Material of 225pcs O ring gasket:Made of Nitrile Butadiene Rubber (NBR) material . Anti static, oil resistant, UV resistance, heat resistant, wear resistant, durable and long service life.
  • Material of 141pcs rubber washers:It includes three types washers:rubber, fiber and klingerit gasket to stop leaks & seal fittings,which also has good wear resistance, corrosion resistance, heat resistance etc..
  • Applications:Ideal for automobile repair,electrical appliance and other fields. Suitable for faucets, cylinders, valves, pumps, automobiles, bearings, etc..
  • Package:Each seal assortment kit comes in a sturdy molded storage case for organization and portability,and comes with a dimension chart for distinguishing different sizes easily..
Check Stock

Johnson Controls VG2831YN VG2000 Series Three-Way Mixing Flanged Globe Valve Body with MP86 Series Electric Non-Spring-Return Actuator, 6\ Size, 347Cv

  • Complete Family of 2-1/2 through 6 in. Cast Iron Flanged Globe Valves, Brass Trim, with Several Styles of Electric and Pneumatic Actuators — offers a broad selection from which to choose.
  • Flexible Features and Options Ordering Matrix — allow engineering to suit your specific application from thousands of easy-to-select, factory-assembled combinations.
  • Standard Johnson Controls Ring Pack Packing's — provide industry-leading reliability and operating life.
  • Every Valve Tested for Leakage — provides energy conservation and ensures occupant comfort.
Check Stock

Jienk 5PCS Pneumatic Female Elbow 1/4 Tube OD x 1/8 NPT Thread Push to Connect Air Fittings 90 Degree NPT Female Nickel Plated Brass Air Line Quick Connector for Air Compressor

  • 【Durable】This fitting has a strong PBT housing with POM release button and zinc alloy ferrule. The thread port adopts nickel plated brass material. High pressure resistance, corrosion resistance and a long service life..
  • 【Good Sealing Performance】Stainless steel tube gripping claw makes the grip force stronger, not easy to trip or leak. External tightening with a flat wrench or socket wrench..
  • 【Push Lock】Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently. 360°rotation, after installation, the tube direction can be changed easily..
  • 【Wildly Application】Hose fittings are used in the field for low-pressure hydraulic and pneumatic systems such as Pneumatic Actuators, Air Compressors, Automatic Manufacturing Operations, Aircraft Controls, and Tire Installation or in industries including Printing, Packaging, Textile. As well as moving parts such as control-valves, cylinders, air bag and air ride..
  • 【Operating Pressure】 0~145 Psi 【Working Temperature】 32～140°F.
Check Stock