ReviewsForward And Reverse

Forward and Reverse Relay Module for Motor/Linear Actuator, Reversing Relay Module (DC 12V)

Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion.
Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For Self-resetting switch, when the switch is pressed the motor operates, and when the switch is released the motor stops..
Compact plastic case and wires connect for easy mount..
Forward and Reverse status indicating LED, forward status lighting red, reverse lighting green. When the control switch is not turned on, the module does not consume electric energy..
Rated current 10 Amp, Operating Voltage: 10 ~ 15V DC..

Application:Our Linear Actuator Controller Suitable for Different Kinds of Linear Actuator..
It is a forward-reverse controller, which enables the motor moving forward --stop-- backward，clockwise--stop--counterclockwise..
Remote control comes along with forward-reverse controller enables distance controlling..
Widely input voltage for 8-30V Motor , high-current output (max output is 5A), Remote control distance can reach 5 meters ..
Can only be used with 1 single linear actuator.(Linear actuator Not conclude).

Forward/reverse control runs in forward for cutting and reverse to flush slush from hole.
40-volt, 5-amp hour lithium ion battery powers an electric DC brushless motor.
Planetary gear system provides lightweight durability and high power density.
Impact-resistant handles with ergonomically placed.
Deadman/power switch and built-in LED lights.

Maxixum Repetitive Peak Reverse Voltage : 400 V.
Low Reverse Leakage / High Forward Surge Current Capability / High Temperature Soldering.
This product is widely used in product development, student experiments, maintenance, production, etc..

Forward Current : 1 A / Maximum Repetitive Peak Reverse Voltage : 50 V.
Low Reverse Leakage / High Forward Surge Current Capability / High Temperature Soldering.

Smooth Forward & Reverse: Moving the lever forward from the neutral position can engage a forward gear, and pulling the lever back from neutral engages the reverse gear. The engine will continue to run at idle until the lever is moved about 32°. Then, move the control lever farther to open the throttle, and the engine will begin to accelerate..
Durable Trim Harness: The control cable features high-temperature resistance and remarkable color coding. The harness contains trim & tilt switch connection cable and key switch panel connector. Serviceable cord facilitates remote power use..
Ergonomic Designs: The power trim and tilt system can adjust the outboard motor angle. Press the switch "up," the outboard motor tilts and goes up.
Press the switch "down," and the outboard motor tilts and goes down. And set the control lever to neutral, push the free accelerator button, and rotate the control lever. The throttle can be opened without shifting into any gear..
Reasonable Designs: The outboard remote control's structure is very stable and practical. There is durable grip control, a lever-free accelerator button, a control lever for smooth reverse and forward, and various accessories are also provided to complete the work efficiently..

The Angle Series Air Angle Impact Wrench has an ultra-compact form factor, just 3.5 in. deep, 2.3 in. wide with a 10.5 in. extended length to let you....
450 ft. lbs. of maximum reverse torque and 300 ft. lbs. of forward torque, 2X more powerful than other air angle impact wrenches.
360-degree rotatable wrench head with 8 locking positions lets you reach and work on hidden bolts with unparalleled ease. Swivel exhaust located at....
Light and impact resistant composite handle. One hand operation with large forward/reverse thumb dial: 6 power settings total (3 forward and 3....
Quiet operation at 97.5 dBA. Low air consumption at only 4.2 CFM at 90 PSI. Weighs only 2.78 lbs. Comes with 1/4" NPT air inlet.

The Flex-Head Angle Series Air Angle Impact Wrench features a 120-degree flexible head in an ultra-compact form factor 3.34 in deep and 2.55 in wide,....
120-degree flexible head, tiltable up to 60 degrees forward and up to 60 degrees backward, combined with a 360-degree rotatable trigger lets you....
Ergonomic soft grip handle. One hand operation with large forward/reverse thumb dial.
400 ft. lbs. of maximum reverse torque and 333 ft. lbs. of forward torque, 2X more powerful than other air angle impact wrenches.
Quiet operation at 91.2 dBA. Low air consumption at only 4 CFM at 90 PSI. Weighs only 2.94 lbs. Comes with 1/4 in. NPT air inlet.

Smooth Forward & Reverse: Moving the lever forward from the neutral position can engage a forward gear, and pulling the lever back from neutral engages the reverse gear. The engine will continue to run at idle until the lever is moved about 32°. Then, move the control lever farther to open the throttle, and the engine will begin to accelerate..
Durable Trim Harness: The control cable features high-temperature resistance and remarkable color coding. The harness contains a neutral switch wires connector, trim & tilt switch connection cable, and key switch panel connector. Long cord facilitates remote power use..
Ergonomic Designs: The power trim and tilt system can adjust the outboard motor angle. Press the switch "up," the outboard motor tilts and goes up.
Press the switch "down," and the outboard motor tilts and goes down. And set the control lever to neutral, push the free accelerator button, and rotate the control lever. The throttle can be opened without shifting into any gear..
Reasonable Designs: The outboard remote control's structure is very stable and practical. There is durable grip control, a lever-free accelerator button, a control lever for smooth reverse and forward, and various accessories are also provided to complete the work efficientl....