ReviewsFour flute Reamers

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs

  • Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
  • tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

  • Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
  • Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
  • Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
  • Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
  • Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #3, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/4 " flute length, Partial Flute Length Carbide.
  • 1" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 2" flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

10Pcs Machine Reamer Set,HSS H7 Straight Flute Chucking Reamer Milling Cutter 3/4/5/6/7/8/9/10/11/12mm

  • Overall length: 91.2mm / 3.59". High-speed steel tool is good for general purpose applications, with combination of hardness and toughness for wear resistance.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts.
  • Application: Designed for accurate reaming in most materials, using all types of equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 7/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

Drillco 4570E Series High-Speed Steel Taper Pin Reamer, Helical Flute, Round Shank, Uncoated (Bright)/Black Oxide Finish, 1 Size, 2-15/16\ Length

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Available in uncoated (bright) and black oxide finish.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Square shank allows hand (straight and spiral flute) reamers to be held in a tap wrench or vise, depending on whether the reamer of the part is rotated.
Check Stock