ReviewsFour way Ball Valve

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock

NestBasics Brine Shrimp Hatchery Kits brine Shrimp Eggs Incubator Hatchery brine Shrimp Eggs Incubator Artemia Hatchery kit Machine

  • The brine shrimp hatchery kits product contains：one unit brine shrimp eggs incubator，one unit black USB plug air pump with one unit black controller valve,one unit check valve, one unit air stone,1 meter transparent aquarium tubing, 1 meter black airline ,one unit brine shrimp net colllector,two units automatic brine shrimp feeder for fish,three units Brine shrimp suction tube and six units Brine shrimp storage bottle.
  • Our brine shrimp incubator is designed professional for hatching brine shrimp eggs which comes with the whole set including air pump air stone and aquarium tubing. The main purpose of the small The USB air pump is for continue to hatching brine shrimp when the electricity is off and after the home is powered off, the The USB air pump can be connected to the power bank to continue hatching brine shrimp..
  • There are two ways to install our brine shrimp hatcher machine.You can use the four suction cup of shrimp incubator to stick it to the tank glass inside or you wanna install it out of the tank glass then you can use the tripod to install out of the tank..
  • The first way to provide oxygen to the brine shrimp incubator is to put the bubble stone in the incubator to provide oxygen. When the brine shrimp has hatched, open the trim valve at ....
Check Stock

Nipple, 2 X 6 In

  • Price For: Each Stem Type: Blowout Proof Seat Material: PTFE Standards: UL, CSA Body Material: Brass Ball Valve Basic Body Material: Brass Port: Full Ball Valve Product Group: Manual Valve Structure: 2-Piece Handle Material: Steel with Corrosion Resistant Plating Item: Ball Valve Body Style: Inline Ball Material: Chrome Plated Brass Handle Type: Lever.
  • Temp. Range: 0 Degrees to 400 Degrees F Stem Material: Brass Max. Pressure: 600 psi CWP Pipe Size: 1/2" Tube Size: 1/2" Connection Type: Sweat x Sweat Features: General Purpose Country of Origin (subject to change): China.
Check Stock

3/4\ Ball Valve, 1 Pack Male NPT (MNPT) X Female NPT (FNPT) Thread,Stainless Steel Shut-Off Valve for Water,Oil and Gas (3/4 inch, 1 pack)

  • Ball Valve：Male NPT (MNPT) X Female NPT (FNPT) screw thread connections,1,000 WOG (PSI) full port heavy duty ball valve is made of 304 stainless steel,safer and stronger,anti-corrosion,long lifetime..
  • Good Sealing：KAPUNOS ball valve has two sealing surfaces with good sealing performance,it can achieve complete sealing..
  • Convenient Operation：KAPUNOS high pressure ball valve has a comfortable operating handle,which opens and closes quickly,It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Widely Used：Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
  • Suitable for Media：The high-quality 304 stainless steel ball valve is suitable for water, sea water, air, oil and steam media.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
Check Stock

Robinair 18560 A/C and Refrigeration Valve Core Remover/lnstaller

  • Robinair Air Conditioning Valve Core Remover and lnstaller - the ideal tool for replacing damaged valve cores or performing A/C or refrigeration service that necessitates valve core removal.
  • Attaches to 1/4 inch male flare access fittings and allows valve core removal and replacement without loss of refrigerant.
  • Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve.
  • Ball valve features a corrosion resistant stainless steel ball for smooth action and a reliable seal.
  • Durable brazed side fitting allows system access for various A/C service procedures.
Check Stock

TOKHAROI 1/4’’ Quick Connect Inch Pressure Washer Ball Valve Kit, Carbon Steel Valve for Pressure Washer Hose, 4000 PSI

  • The ball valve kit is designed for high-pressure hoses.High pressure ball valve has 1/4’’ quick connector and 1/4’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • The max working pressure is 4000 PSI. The max working temperature is 158 F..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
  • Quick Disconnect Fitting: 1/4’’ quick coupler plug + 1/4’’ male NPT thread.
Check Stock

Eastwood 1/2 in. Ball Valve For Dual Blaster For Mixing Valve Assembly

  • Replaces Ball Valve For Mixing Valve Assembly On Dual Blaster.
  • Inline Valve For Connecting Two Pipes Going In The Same Direction With Double-Seal System.
  • Heavy Duty Stainless Handles To Increase Service Life, Fast Turn Open Or Closed Operation.
Check Stock

Eastwood 3/8 in. Ball Valve For Dual Blaster For Mixing Valve Assembly

  • Replaces Ball Valve For Mixing Valve Assembly On Dual Blaster.
  • Inline Valve For Connecting Two Pipes Going In The Same Direction With Double-Seal System.
  • Heavy Duty Stainless Handles To Increase Service Life, Fast Turn Open Or Closed Operation.
Check Stock

Oupeng sky Brass Garden Hose Shut Off Valve,Heavy Duty Brass Shut Off Valve Garden Hose Connector, 2 Pack Heavy Duty 3/4 Inch Solid Brass Garden Hose Shut Off Valve with 4 Extra Rubber Washers.

  • Easy to use & extensive： Swivel connection, perfect for garden nozzle, sprayers, watering tools, accurate attachment to faucet or spigot.It’s perfect for garden hoses and power washer, RV, boat or anywhere there’s a standard 3/4″ garden hose connection..
  • Brass Garden Hose Shut Off Valve： 3/4 in Solid Brass Shut Off Valve Garden Hose Connector, 2 Pack Heavy Duty Water Hose Turn Off Ball Valve Adapter Fittings with 4 Extra Hose Pressure Washers.The hose washers are made of soft, resilient rubber for a water-tight seal. Made to resist hardening and cracking..
  • Heavy Duty brass one way valve,Well made, zero leaks. If you have any questions about these products, please contact us and we will help you solve them as soon as possible..
  • Garden Hose Valve：Extreme Duty Brass Shut Off valve,brass one way valve,Solid Brass Construction,no leakage.You can use these to attach to end of hose then you could swap out heads without turning water off at the hose bib.A great addition to the end of your hose. Makes it easy to change fittings without having to go all the way back to the other end..
Check Stock

RIDGE WASHER High Pressure Ball Valve Kit for Power Washer Hose, 3/8” Quick Disconnect, 4500 PSI

  • High pressure ball valve kit includes a ball valve and two adapters. The adapter set converts 3/8” quick coupler plug to 3/8” male NPT thread and 3/8” quick coupler socket to 3/8” male NPT thread..
  • Working pressure is up to 4500 PSI. The max working temperature is 158 °F..
  • The steel pressure washing ball valve is superior leak resistance. Easy to connect ball valve to gun, pump and hose..
  • The ball valve is easy to turn on and off, provides good leverage under high pressure, designed for high-pressure hose..
  • If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..
Check Stock

Brady Prinzing Ball Valve Lockout, Small, for 1/2\-2-1/2\ Outside Pipe Diameter, Red - BS07A-RD

  • BALL VALVE LOCKOUT: Ball valve lockout device designed to lock pipes 0.5" to 2.5" in diameter.
  • DURABLE VALVE LOCKOUT: Made from ultra-tough polypropylene, this ball valve lock can resist temperatures from 0° to 175°F (-18° to 79°C).
  • VERSATILE VALVE LOCK: Ball valve lockout device can also be used to lock valves open on pipes 0.5" to 1.25" in diameter.
  • OSHA COMPLIANT LOCKS: Compliant with OSHA's Lockout Standard designed to address safety standards.
  • TRUSTED LOCKOUT TAGOUT: Brady is a world leader in lockout/tagout products and services offering industry expertise and a broad range of durable, easy-to-use lockout devices.
Check Stock