ReviewsFpc Board

digitharbor® Video Door Scope Viewer Build-in 600mAh Lithium Battery+cyclic Storage Digital Peephole viewer Door Camera Door Open Chime 2.4 inches Color 320x420p LCD Screen 0.3MP 90degrees View

please be advised, you have to drill a hole on your front door before installation.it is not wireless, and do not support external memory card..
Step 1: According to the door thickness to choose a suitable screw, then turn the screw into the screw hole on the barrel of outdoor unit..
Step 2: Insert the barrel together with the FPC through the door peephole, then hold the outdoor part on door in right direction..
Step 3: Take out the metal bracket (the "UP" arrow on the bracket means upward), the FPC pass through the rectangular hole, the screw pass through the round hole of the metal bracket, then to lock the metal bracket with outdoor part tightly..
Step 4: Connect the FPC from outdoor unit to the connector of the indoor unit in right direction.Step 5: The four slots on the back of indoor unit is aligned with four hooks on the metal bracket and buckle up, then pull down indoor unit to lock tightly. Done!.

Check Stock

Replacement Insert Pad for Fisher-Price Deluxe Space-Saver High Chair FPC43 - Includes One Gray and White Striped Pad

INCLUDES Pad that comes with Fisher-Price Deluxe Space-Saver High-Chair.
PERFECT Shape and Fitting for your Fisher-Price Deluxe Space-Saver High-Chair - Item # FPC43.
AUTHENTIC REPLACEMENT PARTS come in a sealed plastic bag - as received from Manufacturer.
MADE FOR MODEL NUMBER FPC43 - Fisher-Price Deluxe Space-Saver High-Chair.

Check Stock

LE LED Strip Lights, 16.4ft RGB 5050 LED Strips with Remote Controller, Color Changing Tape Light with 12V Power Supply for Room, Bedroom, TV, Kitchen, Desk

Remote Control: With 44-KEY remote, the strip lights provide 20 preset colors, 6 DIY colors and 8 lighting modes..
Adjustable brightness: 6 brightness levels allow you to alter the strip lights from warm to bright..
Easy Installtion: The led strip lights has a stronge self adhesive so they stick very well..
Widely Use: The led strip lights are suitable for bedroom, kitchen, cabinet, car, living room, party or wedding..
Durable and Environmentally friendly: Low carbon, no radiation, no flicker, and no pollution. By adopting qualified FPC circuit board and LEDs, the strip has heat dissipation, making it much more durable..

Check Stock

Replacement Parts for Fisher-Price High Chair ~ Fisher-Price Deluxe SpaceSaver High Chair - FPC43 and FPC44 ~ Replacement Waist and Crotch Straps ~ Gray

INCLUDES Waist and Crotch Straps from Fisher-Price.
PERFECT Shape and Fitting for your Fisher-Price Deluxe SpaceSaver High Chair.
AUTHENTIC REPLACeMENT PARTS comes in a sealed plastic bag - as received from Manufacturer.
MADE FOR MODEL #s FPC43, FPC44 - Fisher-Price Deluxe SpaceSaver High Chair.

Check Stock

Arducam IMX519 Autofocus Camera Module for Raspberry Pi, 16MP AF Raspberry Pi Camera Compatible with Raspberry Pi 4B/3B+, Raspberry Pi Zero 2 W

16 Megapixel: 2 times higher resolution than the Raspberry Pi camera V2. Unlike the native Pi camera, this camera requires some simple script configuration before use and does not support raspbian..
Autofocus: most versatile AF (Manual/Continuous/etc.) experience on a Pi camera..
Sharper Images/videos: Higher quality than the HQ camera..
V1/V2 Size: hassle-free upgrades to your existing projects..
Package Contents: The package includes an IMX519 CMOS camera board with an autofocus lens and a 15cm FPC cable. Please search ASIN: B09TSDZ48F for the camera extension kit, which allows you to place cameras up to 15 meters away for shooting. For the camera case and tripod set, please search ASIN: B09TKYXZFG..

Check Stock

KREPLACEMENT® 10.1 Inch Touch Screen Digitizer Sensor Glass Panel Replacement for ASUS Transformer Book T100TA-C1-GR (Non-LCD)

No.1, ONLY 10.1" Touch Screen digitizer panel for ASUS Transformer Book T100TA-C1-GR. FPC Version: Black. Please make sure that your touch digitizer FPC is in Black Color..
No.2, 7-15 working days to U.S.A. Our carrier is safer for FRIABLE product..
No.3, Sometimes, touch digitizer is called "Touch Screen". BUT the internal LCD screen is not included HERE..
No.4, Assume that you are skilled in installation. It's a replacement part, if you're unsure about the compatibility, please contact us in advance..

Check Stock

Replacement Part for Fisher-Price Highchair - Fisher-Price Deluxe Space-Saver Highchair FPC44 ~ Replacement Feeding Tray Insert ~ Fits Many Other Spacesaver Models, Check List Below

INCLUDES 1 Feeding Tray Insert from Fisher-Price.
PERFECT Shape and Fitting for your Fisher-Price Deluxe Space-Saver Highchair.
AUTHENTIC REPLACeMENT PARTS come in a sealed plastic bag - as received from Manufacturer.
MADE FOR MODEL # FPC44, DRF75, DRF76, FFJ02, FLG95, FLG96, FLG98, FLH00, FPC43, FTL90, FTM04, FTM97 - Fisher-Price Deluxe Space-Saver Highchair.

Check Stock

LoveRPi Ultra Wide Angle Camera for Raspberry Pi 4/3/2/Zero W (5MP, 220 FOV)

ULTRA WIDE ANGLE 220* CAMERA FOR RASPBERRY PI: Record crystal clear 1080P videos and capture 2592 by 1944 photos with our high performing camera for the Raspberry Pi board family. Equiped with large 1.4 by 1.4 micron sensor pixels, this module is designed for ultra wide angle, low latency, and high quality imaging required for computer vision, streaming media, and remote data acquisition..
INTEGRATED IR FILTER: Infrared light is invisible to the naked eye but will cause hue changes to CMOS camera sensors. The integrated filter prevents infrared light from distorting the image hue resulting in color accurate imagery for daytime outdoor applications..
AUTOMATIC IMAGE CONTROLS: This module will intelligently adjust white balance, exposure, sensitivity, black levels to optimize for best image quality. Additionally, it has built-in 50Hz/60Hz anti-flickering, lens correction, and defective pixel cancelling functions..
SIMPLE INSTALLATION FOR ALL PI MODELS: Two FPC cables of different length for Raspberry Pi 4, Pi 3, Pi 2, Pi B+ are included. PFC cable adapter for Raspberry Pi Zero, Pi Zero W, and Pi 0WH are also included. Open a terminal, type in "sudo raspi-config.

Check Stock

Arducam 16MP Autofocus Raspberry Pi Camera Module with ABS Case, IMX519 16 Megapixel High Resolution Autofocus Camera for All Raspberry Pi Models

【16MP for All Pis】The Raspberry Pi camera features a 16MP IMX519 sensor with a pixel resolution of 4656 x 3496, twice as high as the v2 camera and 40% higher than the HQ camera.
Compatible with any Raspberry Pi board with a MIPI/CSI interface.
Unlike the native Pi camera, this camera requires some simple script configuration before use, and does not support raspbian..
【IMX519 AF Camera Moudle】Built-in autofocus motor allows you to get focus quickly so that you can focus to infinity no matter where you place your camera. The minimum focus distance is 10cm, and the longest allowed exposure time is 200 seconds..
【Crisper Images/Videos】The 16 megapixel camera can capture 1080p Full HD video at up to 30 frames per second and 720p HD video at up to 60 frames per second, and also provides an effective 80-degree field of view..
【V1/V2 Size】The autofocus camera module has the same size as the pi camera V2, the package comes with plastic housing, also suitable for V1 and V2 boards. And the housing also has an integrated tripod mounting hole, which you can install on any 1/4 hole distance tripod..
【Package Contents】The package includes a camera board with IMX519 sensor and an autofocus lens, an FPC cable and a camera housing. Please search ....

Check Stock

kuman for Raspberry PI Camera Module 5MP 1080p OV5647 Sensor HD Video Webcam Supports Night Vision for Raspberry Pi Model B/B+ A+ RPi 3/2/1/zero/zero W with FFC/FPC Cable Raspberry pi Camera

RPi Camera, Supports Raspberry Pi model B/B+ A+ RPi 3 2 1 with the FFC Cable, it also support raspberry pi zero/ zero W with the FPC Cable.
5 megapixel OV5647 sensor, Supports up to 2 infrared LED and/or fill flash.
Raspberry Pi Night Vision Camera, supports all revisions of the Pi.
Package Contains: 2pcs Infrared LED Light, 1 piece Infrared Night Vision Webcam Camera Board.
The camera is capable of 2592 x 1944 pixel static images, and also supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording.

Check Stock

AURSINC WiFi Deauther Watch V3 ESP8266 Programmable Development Board | Wearable Smartwatch | OLED&Laser | Attack/Control/Test Tool|LOT for DSTIKE NodeMCU

ORIGIN DSTIKE Watch V3, with better performance and appearance than V1&V2, is wrapped by the Arcylic cover and 3D print transparent case, moreover, equiped with upgraded software system, which is easier to operate..
WiFi Test Tool: installed with the latest ESP8266 Deauther software, the deauther watch can perform different secure tests for your WiFi networks, equiped with 5dB FPC antenna. NOTE: ESP8266 supports 2.4GHz only..
Extensible: Deauther wathch V3 also can be used to develop your own software, it is indeed a ESP8266 development board, easy to operate..
LONG WORKING TIME: DSTIKE Deauther watch has a built-in an 800mAh battery, the maximum working time of the WiFi Deauther wristband reaches 8 hours, also the battery can be charged while in use. Moreover, the watch is equiped with OLED display and a 3-way momentary slide switch..
NOTE: the wifi deauther watch can be used only for testing and educational purposes on your own devices! Firmware and Software download please refer to the below description..

Check Stock