ReviewsFpd Module Panel

Treedix 3.5 inch TFT LCD Display 320 x 480 Color Screen Module Compatible with Arduino UNO R3 Mega2560

Color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor)..
Composed of a color TFT-LCD panel, driver IC, FPC and a back light unit..
The module display area contains 320x 480pixels..
This product accords with RoHS environmental criterion..
Compatible with Arduino UNO R3 Mega2560 DUE..

Check Stock

20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module

How to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protectio....

Check Stock

RF Coax to HDMI DVI Demodulator TV Tuner for PAL B/G System Used in Europe Asia Middle East

PAL B/G RF coax demodulator for converting the foreign PAL B/G type RF coax cable TV signals into either 1080p HDMI or DVI output at 1920x1080 pixels.....
Premium external TV tuner module for MATV/SMATV systems used in campus, classrooms, hotels, hospitals, sports bars or restaurants. Full-frequency PAL....
External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs. Advanced HD video processor with digital comb filter for smooth....
Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater system. Easy operation control via IR remote....
Digital LED screen for TV channel display on the front panel of the module to show users the TV channel selected. Automatic video/audio gain control....

Check Stock

RF Coax to HDMI DVI Demodulator Analog TV Tuner for NTSC System

Premium external TV tuner module for MATV/SMATV systems used in campus, classrooms, hotels, hospitals. Supports all coax signals coming from cable outlets or cable boxes with RF output only, satellite receivers or modulated CCTV security systems. Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs..
Advanced RF coax TV demodulator for converting the RF coax cable TV signals into either 1080p HDMI or DVI output at 1920×1080 pixels..
Full-frequency analog NTSC cable channel support from CH2 to CH139. Full aerial VHF/UHF channel support from CH2 to CH83. Easy replacement solution for HDTVs with broken coax tuner inputs. External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs. Advanced HD video processor with digital comb filter for smooth digital video/audio output. [Note]: This is an analog TV tuner so it can not be used for digital cable channels and can not accept antenna input..
Multiple tuner units can work together with video wall system or split-screen video processor to form a large-scale display system or display multiple TV channels on one screen at the same time. Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater syst....

Check Stock

Bush Business Furniture Series C 72W 2 Door Hutch in Hansen Cherry

All Hutches include fully finished Back panel and fabric covered tack Board.
Mounts on 72W desk Shell, 72W credenza Shell, right/lh corner module, 2 36W 2-Drawer lateral files Placed side-by-side, or one 2-Drawer lateral file Placed adjacent to the deep end of a corner module.
Accepts two task lights (sold separately).
Features Self-Closing Euro-style hinges for a soft close.
Combination of open and closed storage for all of your organizational needs.
Ships in several boxes, may ship separately.

Check Stock

Weber 65946 Genesis 330 Igniter Kit 2011 & Newer, Front Mounted Control Panel

For use with Genesis 330 Series Grills 2011 & NEWER, Front Mounted Control Panel..
Kit Includes Weber part #'s 88826 (Module housing and Shield), 40277201 (Hardware Kit and Grey Button), 62754 (Set of 4 Ignition Electrodes) and 1 battery..
IMPORTANT: THIS IS FOR 2011 AND NEWER GRILLS WITH A Front Mounted Control Panel..

Check Stock

AUECOOR 120W Solar Panel Bendable Flexible Monocrystalline Solar Panel for RV, Boat, Cabin,Trailer, Roofs, Off Grid System,12V Battery Charging

Good Bendability :flexible design enables the solar panel to be curved to a maximum 30-degree arc, mounted on a curved roof, RV, travel trailer, marine, van, truck, boat, cabin, tent or any other irregular surface..
High Conversion & Waterproof: 120W Guranteed under full sunshine. This solar panel module conversion efficiency can comes up to 20.5%, It has excellent performance even in low-light environments..
Thin and light weight: This 120W solar panel is only 0.1inch (2.5mm) thick, it weighs approximately 4.4 pounds(2.0KG), making transportation and installation a breeze..
Easy installation:this solar panel is easy to transport,ang,and remove,pre-drilled holes for easy installation.
Each solar panel with 90cm of special cable with Male/Female connectors attached to the junction box..
The solar panel and junction box are completely water resistant. Suitable for outdoor use in all weather conditions..

Check Stock

Liftmaster/Chamberlain/Sentex 41as050-1 Receiver Logic Board Assembly

There are 8 lighting modes for you to choose: 1: 2-8 function cycle,2: Star flash,3: Double flash,4: One way fades in and out,5: 4 single flashes, 4 double flashes,6: All fade in and out,7: 4 single flashes,8: All on..
It can be connected to a 1.2V nickel-metal hydride battery and a 2V solar panel. The maximum charge current is 400mA and the discharge current is 100mA..
Solar light string controller circuit board with power switch and lighting mode switch, easy to operate..
The controller module can be used for 100LED solar string lights, solar copper wire lights, solar studs and other lamps..
The solar light string controller module is made of glass fiber material, with fine workmanship and durability..

Check Stock

AUECOOR Solar Wind Hybrid System: 400W Wind Turbine Generator+ 120W Flexible Monocrystalline Solar Panel for Off Grid 12V Battery Charging

High Conversion & Waterproof: Each Solar Panel 120W Guaranteed under full sunshine. This solar panel module conversion efficiency can comes up to 20.5%, It has excellent performance even in low-light environments. The solar panel and junction box are completely water resistant. Suitable for outdoor use in all weather conditions..
Good Bendability :flexible design enables the solar panel to be curved to a maximum 30-degree arc, mounted on a curved roof, RV, travel trailer, marine, van, truck, boat, cabin, tent or any other irregular surface..
Thin and light weight: This 120W solar panel is only 0.1inch (2.5mm) thick, it weighs approximately 4.4 pounds(2.0KG), making transportation and installation a breeze..
Easy installation:this solar panel is easy to transport,ang,and remove,pre-drilled holes for easy installation.
Each solar panel with 90cm of special cable with Male/Female connectors attached to the junction box.
400W 5-Blade Wind Turbine with a 2.5m/s start up speed for constant and efficient power generation exceeding a similiar 3-blade turbine.

Check Stock

AllAboutAdapters RF Coax to HDMI VGA Component YPbPr Video Demodulator TV Tuner for NTSC System

...MI or DVI output at 1920x1080 pixels. Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs..
Supports all coax signals coming from cable outlets or cable boxes with RF output only, satellite receivers or modulated CCTV security systems. Premium external TV tuner module for MATV/SMATV systems used in campus, classrooms, hotels, hospitals, sports bars or restaurants. Full-frequency analog NTSC cable channel support from CH2 to CH139. Full aerial VHF/UHF channel support from CH2 to CH83. Backward compatible with all DVI equipments via using HDMI to DVI adapter..
Easy replacement solution for HDTVs with broken coax tuner inputs. External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs. Advanced HD video processor with digital comb filter for smooth digital video/audio output. Premium de-Interlacer with low noise reduction technology adopted for clear and sharp images with fine details..
Multiple of these RF demodulator/tuner units can work together with video wall system or split-screen video processor to form a large-scale display system or display multiple TV channels on one screen at the same time Great RF coax to HDMI audio decoder for streamline setup with new home A/V r....

Check Stock

7inch DSI LCD 800×480 for Raspberry Pi 4B/3B+/3A+/3B/2B /B+/A+ and Compute Module 4/3+/3, 800×480 Capacitive Touch Screen Monitor

7inch DSI LCD,7inch TFT screen. 800x480 hardware resolution.
Capacitive touch panel, support 5-point touch.
Supports Pi 4B/3B+/3A+/3B/2B/B+/A+ and Compute Module 4/3+/3,but Compute Module 4/3+/3 requires extra adapter board.
Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free..
DSI interface, refresh rate up to 60Hz. Support backlight adjusts by software..

Check Stock