ReviewsFpga Compatible

Allen & Heath SQ-5 Digital Mixer 48 Input Channels 7 Capacitive Touchscreen Automatic Mic Mixing 32×32 USB Audio Interface Black

  • 96kHz XCVI FPGA core, less than 0.7ms Latency with all processing enabled.
  • 48 Input channels, 12 Stereo mixes + LR, 3 Stereo Matrix.
  • 16 onboard preamps, 17 faders, Rackmountable 19-inch, 8 SoftKeys.
  • Access to DEEP plug-ins, Automatic Mic Mixing, 8 Stereo FX engines + dedicated returns.
  • I/O Port for expansion and system compatibility, AES and XLR outputs, 7” capacitive touchscreen.
Check Stock

Hellotronics Breadboard Jumper Wires, Pack of 130 Pieces More Red and Black Male Female M/F Jumper Wire Cables Square Head 0.1'' 26AWG 5 Colors (10cm/4'' Length, Male-Female)

  • HELLOTRONICS BRAND JUMPER WIRES: The REAL 26AWG wires comes with 7 cords x 0.16mm and material in RoHs compliance, makes it more safe to use..
  • MORE COLORS AND MORE CHOICES FOR YOU: Each package comes with 5 colors by 20 pieces each, NOW with 30% MORE Red and Black Jumpers for power lines, TOTAL 130 pieces/pack. Hellotronics supplys male to male, male to female and female to female Jumper Wires with length 10cm/15cm/30cm. These Jumper Wires work great with Arduino Breadboards Raspberry Pi and really any 0.1" pitch prototyping boards..
  • MAKES PROJECT EASY: Solid quality product that makes quick jumper connections on a breadboard very easy. They will become your go-to for quick connections compatible with Arduino or FPGA board and breadboard..
  • PRE-MADE JUMPER WIRES: Their ends are solid, at the right length and proper diameter to fit in the holes of your breadboard. This makes it very easy to build or change configurations on your breadboard..
  • WHAT YOU WILL GET: You will definitely receive high quality Jumper Wires, also our worry-free 6-month warranty and friendly customer service..
Check Stock

Mackie DL Series, Digital Wireless Live Sound Mixer 32-channel with Built-In WiFi and Onyx+ mic Preamps, Unpowered (DL32S)

  • 96kHz XCVI FPGA core, less than 0.7ms Latency with all processing enabled.
  • 48 Input channels, 12 Stereo mixes + LR, 3 Stereo Matrix.
  • 16 onboard preamps, 17 faders, Rackmountable 19-inch, 8 SoftKeys.
  • Access to DEEP plug-ins, Automatic Mic Mixing, 8 Stereo FX engines + dedicated returns.
  • I/O Port for expansion and system compatibility, AES and XLR outputs, 7” capacitive touchscreen.
Check Stock

Aoicrie USB Logic Analyzer Device with EMI Ferrite Ring USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug Professional Microcontroller Debug USB Powered FPGA for ARM FPGA M100 SCM

  • This item is an logic analyzer designed to be compatible with Logic Analyzer software, The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • Input High Voltage: 2.0V to 5.25V, Input Impedance: 1Mohm || 10pF (typical, approximate).
  • A total of 8 digital channels, the voltage range is 0V and 5.5V, of which 1.5V is the voltage threshold, below 1.5V is considered low, above 1.5V is considered high, Works with 5V, 3.3V, 2.5V, 2.0V systems. May work with 1.8V but not recommended.Error/Accuracy: pulse-width measurement: +/- 42ns (at 24MHz)..
  • UART, SPI, IIC and other communication debugging, 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols.Suitable for single chip development,ARM system development,FPGA development..
Check Stock

AMTAST Ultrasonic Flaw Detector Ultrasonic Flaw Detector Testing Equipment AMT219

  • The core hardware is designed with ARM+FPGA, and the software uses a highly reliable multitasking operating system..
  • Which greatly improves the function, portability, durability and reliability of the instrument..
  • It uses a master-slave menu, and is designed with shortcut keys and a digital rotary knob. Video playback supports pause, fast forward, fast rewind, and stop functions..
  • The all-aluminum metal shell is strong and durable, and the electromagnetic shielding performance is very good..
  • Real-time screenshots of all pages and flaw detection reports, and save them as BMP pictures to U disk, which can be set as color or grayscale pictures. BMP pictures and PDF files can be viewed on a computer or mobile phone..
Check Stock

Handwheel Off-Line Controller, DDCSV3.1 4 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit for CNC Control

  • 16 opto isolated digital inputs,3 opto isolated digital outputs. ARM9 main control chip,FPGA core algorithm chip..
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version..
  • 4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle..
  • Handwheel Three Output:Voltage, Single-Ended, Differential.
  • USB flash disk support for G code file input,no size limited of the G-code file..
Check Stock

Digilent Zybo Z7 Zynq-7000 ARM/FPGA SoC Development Board Zybo Z7-20

  • Zybo Z7 comes in two APSoC variants: Zybo Z7-10 features Xilinx XC7Z010-1CLG400C. Zybo Z7-20 features the larger Xilinx XC7Z020-1CLG400C. Either....
  • A feature-rich, ready-to-use embedded software and digital circuit development board with a rich set of multimedia and connectivity peripherals to....
  • Built around the Xilinx Zynq-7000 AP SoC, with 650MHz dual-core Cortex-A9 processor and DDR3 memory controller with 8 DMA channels.
  • On board user interfaces include 6 push buttons, 4 slide switches, 5 LEDs, 2 RGB LEDs, and more.
  • Expansion opportunities with six Pmod connector ports, over 30 FPGA I/O, four Analog capable 0-1.0V differential pairs to XADC, and more.
Check Stock

Handwheel Off-Line Controller, DDCSV3.1 4 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit with Flash Disk Connection Cord

  • 16 opto isolated digital inputs,3 opto isolated digital outputs..
  • ARM9 main control chip,FPGA core algorithm chip..
  • 4 axle motor Control.Differential and direction output signal,maximum.500Khz per axle..
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version..
  • USB flash disk support for G code file input,no size limited of the G-code file..
Check Stock

HIDIZS AP80 PRO MP3 Player with Bluetooth, High Resolution Lossless Music Player with LDAC/aptX/FLAC/Hi-Res Audio/FM Radio, Digital Audio Player with Full Touch Screen (Black)

  • ♫『DUAL DAC CHIP & PRECISION FPGA CHIP』Built in DUAL Ess flagship ES9218P DAC chip, the lossless music player delivers a powerful decoding and an SNR of up to 130dB and THD+N down to -114dB, which are excellent to ensure audiophile quality sound all the way. With the dedicated FPGA chip HBC 3000, the accuracy of digital music reproduction can be increased by master clock and the clock jitter can be perfectly controlled. Meanwhile, it can hardware decord Native DSD 64/128/256..
  • ♫『BI-DIRECTIONAL BLUETOOTH 4.2 & UAT TRANSMISSION TECHNOLOGY』AP80 PRO supports Bidirectional Bluetooth 4.2, Hiby UAT, Sony LDAC and APT-X. It can output as a Bluetooth audio source but also can be a professional Bluetooth decoding amplifier. UAT is an all-new Bluetooth audio code developed by HiBy. Support an industry-highest sample rate of 192kHz at an industry-highest data bandwidth of 1.2Mbps, even adapt and optimize itself to different music genres. Support HWA/SBC/FLAC/APE/WMA/WAV/SACD-ISO..
  • ♫『 SINGLE-ENDED 3.5mm & BALANCED 2.5mm JACKS& Samsung IPS HD TOUCHSCREEN』Our AP80 PRO MP3 Player is designed with single-ended 3.5mm and balanced 2.5mm jacks illuminate each other, you are assured the best possible listening experience. Desgined with Samsung 2.45" (480&#....
Check Stock

Boquite CNC Motion Controller, DDCSV3.1 4 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit

  • 16 opto isolated digital inputs,3 opto isolated digital outputs. Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.
  • Analog spindle control 0-10V spindle control (can be modified as PWM output). 4 axle motor control differential Pulse and direction output signal,maximum.500Khz per axle.
  • ARM9 main control chip,FPGA core algorithm chip. 5 inches TFT screen, resolution ratio: 480x272,17 operation keys.
  • Applications: CNC machine tools, printing machinery and other 0 correction and signal segmentation.
  • After-sale Service. We are confident in our products and stand behind them 100%. Just reach to us with any questions or concerns and we will be happy to help in less than 24 hours!.
Check Stock

KOOBOOK 2Pcs Mini DC-DC Boost Step-up Power Supply Module 3.3V 3.7V 5V 6V 7.2V 9V to 12V Voltage Regulator Converter

  • 1.2A current limiting resistor,Remove the resistance, the maximum input current can reach 2A..
  • But IC have "Over Temperature Protection" Function.It will turn off the power MOSFET automatically when the internal junction temperature is over 150....
  • DC-DC Boost module working frequency 1.0MHZ..
  • 2.54mm pin pitch,Arduiuo UNO DUE Breadboard FPGA / CPLD Development Board friendly..
Check Stock