ReviewsFractional Bottoming Tap

Swordfish 8045 - Metric Alloy Steel Hand Threading Tap Set of 3 pcs Bottoming Plug Taper Uncoated Finish Square End M22x2.5

  • Straight Flute Type, Round with Square End Shank, Uncoated (Bright) Finish.
  • Each set includes 1 taper, bottoming and plug tap in the specified size.
Check Stock

IRWIN Tap And Die Set Machine Screw/SAE/Metric 76-Piece 26376

  • This tap and die set is great for auto repair and machinery.
  • High-carbon steel taps and dies provide durability.
  • Machine screws: 4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 10 - 24 NC, 10 - 32 NF and 12 - 24 NC.
  • Fractional: 1/4" - 20 NC, 1/4" - 28 NF, 5/16" - 18 NC, 5/16" - 24 NF, 3/8" - 16 NC, 3/8" - 24 NF, 7/16" - 14 NC, 7/16" - 20 NF, 1/2" - 13 NC and 1/2" 20 NF.
  • Metric: 5/8" hexagon: 3mm - 0.5, 4mm - 0.7, 4mm - 0.75, 5mm - 0.8, 5mm - 0.9 and 6mm - 1.0.
Check Stock

IVY Classic 01543 No. 43 Wire Gauge Drill Bit, M2 High-Speed Steel, 135-Degree Split Point, 1/Card

  • Jobber length bits designed for drilling stainless and hard steel, plastic and wood, Premium Swift Bore (Registered Trademark).
  • Hardened and tempered M2 high-speed steel bits fall between standard fractional drill sizes.
  • Precision ground, bright finish with polished flutes that increase chip ejection.
  • 135-degree split point for fast penetration and accurate starting with no center punch.
  • Wire Gauge Diameter: No. 43, Decimal Inches Equivalent: 0.0890, Tap Size: 4-40 NC, Overall Length: 2-1/4-inch.
Check Stock

Sasquatch - 1.5 x 16 inch Scotch Eye Wood Auger Drill Bit For Bushcraft and Camping | Hand Auger | For Bushcraft Backpack | Perfect Addition To Survival or Camping Gear Packs

  • Drill bit size charts in fractional inches, metric, number, and letter sizes.
  • Scales to larger screens on 7" and 10" tablets for easy readability.
Check Stock

Airpro Fork SBK-102 Snowbike Bottoming Kit

  • Standard snowbike setups weigh 65 to 85 pounds more than a stock dirt bike (BEFORE you add racks, packed snow, spare gas, etc), which can lead to violent bottoming and bent lower fork tubes..
  • The AirPro allows riders to add 8-15 PSI to a spring fork, significantly increasing bottoming resistance and ride height..
  • This accessory provides a low cost option for riders to achieve great results while using independently, or in conjunction with a front fork revalve/respring (depending on rider skill level)..
  • Add 8-15 PSI to significantly improve bottoming resistance and increase ride height.
  • Fraction of the cost of re-spring/re-valve.
Check Stock

Airpro Fork SBK-103 Snowbike Bottoming Kit

  • Standard snowbike setups weigh 65 to 85 pounds more than a stock dirt bike (BEFORE you add racks, packed snow, spare gas, etc), which can lead to violent bottoming and bent lower fork tubes..
  • The AirPro allows riders to add 8-15 PSI to a spring fork, significantly increasing bottoming resistance and ride height..
  • This accessory provides a low cost option for riders to achieve great results while using independently, or in conjunction with a front fork revalve/respring (depending on rider skill level)..
  • Add 8-15 PSI to significantly improve bottoming resistance and increase ride height.
  • Fraction of the cost of re-spring/re-valve.
Check Stock

Tusk Billet WP Fork Adjuster Knobs Blue For KTM 350 SX-F 2017-2022

  • Standard snowbike setups weigh 65 to 85 pounds more than a stock dirt bike (BEFORE you add racks, packed snow, spare gas, etc), which can lead to violent bottoming and bent lower fork tubes..
  • The AirPro allows riders to add 8-15 PSI to a spring fork, significantly increasing bottoming resistance and ride height..
  • This accessory provides a low cost option for riders to achieve great results while using independently, or in conjunction with a front fork revalve/respring (depending on rider skill level)..
  • Add 8-15 PSI to significantly improve bottoming resistance and increase ride height.
  • Fraction of the cost of re-spring/re-valve.
Check Stock

44SPORT Olympic Fractional Plates -Set of 1/2 lb Weights (8 Plates. Total Weight: 4lbs)

  • OLYMPIC FRACTIONAL PLATES: Set of lb Fractional Weight Plates that fit any Olympic bar (8 total)..
  • FOR OVERLOADING: Micro Plates for Personal Records and Progressive Overload Training.
  • HIGH QUALITY: Standard sized for standard 2 Olympic bars, 17.5" outer diameter. Make weight increases in as little as 1/2 lb increments..
  • IMPROVES TECHNIQUE: Use to learn and practice technique for deadlifts, olympic lifts, cleans, snatches and more..
  • 100% QUALITY: With the 44SPORT Fractional Plates Weight Sets you get tremendous flexibility for all strength levels. Try this today and overload your strength..
Check Stock

Union Butterfield 3306E(UNC) High-Speed Steel Thread Forming Tap, Extra-Long, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, H5 Tolerance, 6\ O'all Length, 3/8\-16 Thread Size

  • Cold-forms threads in through holes and blind holes without producing chips.
  • Extension Rol-Form tap is extra-long for extended reach, with lubricant grooves to improve coolant flow.
  • Bottoming chamfer for threading the bottoms of blind holes.
  • Available in UNC (Unified Coarse) or UNF (Unified Fine) right-hand thread options for different applications.
  • High-speed steel for compatibility with a variety of materials.
Check Stock

Lisle 83100 External Torx Plus Socket Set, 9pc

  • For Use in Restricted Areas. Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2". Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards. Sockets contained on a vinyl holder..
  • Ideal for use in areas where a T handle won't fit..
  • Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2"..
  • Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards..
  • Ideal for use in areas where a T handle won't fit.
  • Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2 inch.
Check Stock

183 Piece Black Chrome Socket Set

  • Black chrome finish is corrosion resistant and visually distinctive.
  • Fractional spline wrenches can be used on fractional 4, 6, 12 point, spline and Torx fasteners.
  • The chrome-vanadium switch lever allows for easy changes in turning direction which helps improve speed.
  • 15-Degree angled offset box end helps keep shank clear of obstructions.
Check Stock