ReviewsFrame Kit

CondoMounts Heavy Duty 19-Piece 90lbs NO Stud Drywall or Metal Stud Mounting Kit for TV Frame TV No Gap Mount Mounting kit.

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • FRAME TV MOUNTING KIT : Perfect for Mounting Frame TV Mount directly on drywall without the need for studs. 3/16 screws fit frame tv NO gap wall mount..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • FULL PACKAGE- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
Check Stock

VANTA SPORTS Triple 10' DIY Powder Coated Rust Resistant 10 Piece Golf Frame Corner Kit Fittings with Threaded Eye-Bolts

  • 10 pieces 1" Diameter Powder Coated Rust Resistant Welded Steel Frame Corner Connector Kit to construct a 10'x10'x10' Golf Hitting Net Frame. Steel pipes are not included and are sold separately at most home improvement or electrical supply stores..
  • Pipes you purchase can be cut to construct a customized frame size to fit your area indoors or outdoors..
  • This kit can also construct a 10' canopy or shelter frame. The baffle tees could also be used to hang advertising banners when used as a festival or craft show frame shelter..
Check Stock

Canvas Wood Stretcher Bars Painting Wooden Frames for Gallery Wrap Oil Painting Posters, Modern Life Accessory, 16"x20"/40.6x50.8cm

  • ①100% Brand new! Notes:Following the installation guides in the image, then use the metal pin to strengthen it. It really needs some strngth, turn to some males for help if necessary. Designed to satisfy the fun of DIY assembly, the canvas stretcher bars kit can be used to mount a frameless picture through simple tools and operation steps..
  • ②Easier to DIY your own canvas stretching system, all you need is a small hammer, a pair of scissor and a phillips screw driver.All standard stretcher bars are made from white pine, non-toxic, odorless, safe and reliable..
  • ③Material: Pine wood, Color:Oringinal wood, Bar Width: About 3cm/1.18", Frame Size(approx.):27.9x35.6cm/11x14”, Package Included: 4 x Frame Bars, 1 x Tools Kit..
  • ④Oily double-sided adhesive on the side and back side of the frame to connect the joints. Super strong, smooth canvas fixed on the frame, rather than using a tightening device.The ladder-shaped corner braces and U-shaped stapler will fix the frame firmly, provide excellent long-term stability..
  • ⑤Professional solid wooden frame kit for oil painting, po....
Check Stock

Pearhead Baby Hand Casting Kit and Foot Casting Kit Newborn Casting Kit and Baby Frame Baby Girl or Baby Boy Keepsake

  • Capture your baby girl or baby boy's tiny Handprints or footprints and cherish them year after year with this baby print casting kit and frame by....
  • Includes white frame, pink and blue reversible backing, clay, roller, tape, instructions, popsicle stick and white casting mixture.
  • Back of frame includes a sawtooth hanger for easy wall mounting or display This wide base frame anywhere throughout your home on a desk or shelf.
  • This casting kit and impression frame makes the perfect gender-neutral baby keepsake gift for expecting mothers, gift for new mothers or baby shower....
  • Frame dimensions: 8.27"W x 8.27"H x 1.61"D.
  • package dimensions: 8.66"W x 8.66"H x 2.4"D.
Check Stock

Prime-Line MP8244 Screen Frame Kit, 7/16 inch x 3/4 x 60 in, Aluminum, White Finish, Includes Vinyl Spline and Square-Cut Corners, (1 set)

  • Used to construct new screen frames for missing or damaged window screens.
  • This kit allows for the construction of one 60 in. x 60 in. screen frame, or any other smaller size using the components of this kit.
  • Frame material comes in a white finish with white screen corners.
  • Aluminum frame, vinyl spline with plastic corners and charcoal fiberglass mesh.
  • Four square-cut plastic corners are included with each kit.
Check Stock

MICKYU Baby Clay Handprint Footprint Kit, Newborn Picture Frame Shower Gifts Nursery Decor, Hand Foot Impression Photo Keepsake for Girls Boys

  • 【KEEP SWEET MOMENTS】Capture the timeless beauty of your baby's or pets tiny little hands and feet with our complete keepsake and photo frame kit. Boys and girls every time you look at this frame it will bring you joy and happiness..
  • 【PREMIUM QUALITY】This adorable kit comes with 4 packs of non-toxic white clay, mini rolling pin, handpainted solid wood frame with plexiglass, instructions. FRAME SIZE: 13 x 11 in, 4 x CLAY AREA: 4 x 3 in, PHOTO AREAS: 4.5 x 3 in, Photos can be slightly bigger..
  • 【EASY FOR USE】Simply place the clay into the center of frame's backboard, and press with the palm of your hand. Fill the entire space right into the corners. Then use the enclosed roller to smooth it out. No Mixing and No Baking required, No need to rush, clay will stay soft for a while , and take your time to capture the perfect little handprint or feetprint..
  • 【HOME DECOR】This baby clay frame keepsake is the perfect gender-neutral nursery décor. They make a great addition to your bathroom, bedroom, living room, kitchen, office, or any room. You can hang it on the wall or put on the table..
  • 【GIFT CHOICE】This Newborn baby hand and footprint picture prame kit is nice gifts to your loved families, friends, relatives or someone else for New Year’s D....
Check Stock

Fit-Right Adjustable Chain Link Gate Kit | Square Corner Frame | 4' High-Expands from 24” to 72” Wide | Black

  • CUSTOM SOLUTION: Fit-Right Frame Adjustable Walk Gate Kit fits openings of 24" to 72" wide is ideal for when you need a custom solution for a special sized gate opening.
  • ANTI-SAG CHAIN LINK GATE KIT: This gate hardware kit has a patented truss cable system that keeps your gate from sagging or dragging.
  • EASY TO INSTALL: The Adjust-A-Gate chain link gate kit is installed on-site to perfectly fit your gate opening every time.
  • COMPLETE GATE KIT: Includes everything you'll need to build a chain link walk through gate. Steel gate frame, powder coated chan link, lockable latch, gate hinges, steel wire ties (posts and post hinges not included).
  • DRIVE-THROUGH DOUBLE GATE: Purchase 2 kits and a UL301 Drop Rod kit for building a double gate drive through up to 12' wide.
Check Stock

Rocket Door Steel Frame Single Pocket Door Frame ONLY System Kit - Door NOT Included (for a 36\ x 80\ Door)

  • Accommodates 1-3/8 in. – 1-3/4 in. thick doors (door not included), Up to 130 lbs. in weight.
  • Fits 2×4 stud as well as other sizes - Note: *Different size studwork can be used however the head timber above the track needs to always be 2×4, additional layers of drywall each side can then be used to make up the difference..
  • Our single pocket door kit is easy to assemble and install. Unlike other pocket door kits at a similar price, the Rocket Pocket Kit includes a track with runners and galvanized steel horizontals and vertical that assemble together to create a complete pocket door frame..
  • Customer to Supply: Door Panel 1-3/8 in. or 1-3/4 in. thick, max weight 130 lbs., Studwork, 1/2 in. standard drywall, and Wood jambs (see instructions).
  • KIT INCLUDES: Frame kit ONLY (door not included), galvanized steel pocket including the track, smooth & quiet chrome steel runners, spring steel door brake, adjustable pocket entrance guide, door brackets, adjustable bolts and nuts, screws for frame assembly & plasterboard attachment, and installation instructions. Double doors? (just order two).
Check Stock

OTC 8031 Ball Joint Set for Jeep/Truck CHROME

  • A complete set of adapters and special large C-frame to remove and install ball joints on most Chrysler/Dodge light-duty trucks, 1999 - 2004 and Jeep....
  • The high clearance, specially designed and produced OTC large C-frame allows for the repair of the most recent vehicles.
  • Large C-frame, 19 adapters, and replaceable forcing screw tip to allow the use of the adapters in the 6530 kit to be used for other applications.
  • Kit comes in a blow-molded case and includes an application chart and instructions.
Check Stock

Thunder Tiger RC Rudder Servo Gear Set Innovator

  • ☆【QUALITY METAL GEAR】：Using high-quality hard alloy materials, equipped with metal gears, the RC gear servo kit has high precision and is not easy to jam.
  • ☆【HIGH-STRENGTH ALUMINUM FRAME】：Using high-quality all-aluminum frame, and after precision processing, the RC gear servo kit is strong and not easily deformed.
  • ☆【HIGH OPERATING EFFECIENCY】：The RC gear servo kit has high operating efficiency, low noise, low power consumption, and is easy to install and disassemble.
  • ☆【WITHSTAND HIGHER LOADS】：RC gear servo can withstand higher loads and ensure the normal operation of the server, effectively improving the performance of RC cars.
  • ☆【5 SIZE SERVO ARMS】：There are 5 different servo arms in the RC gear servo kit package, which can meet your different needs, suitable for 1/10 1/12 remote control car RC off-road vehicle.
Check Stock

Afranti Bicycle Motor Kit 80cc, Motorized Bicycle Engine Kit 2 Stroke Petrol Gas Motor Engine Kit Fits Most 26' or 28' Bikes with V-Frame

  • Afranti 80cc Bicycle Engine Kit – Engine Type: Single cylinder,air-cooled,2-stroke.For screw and bolts easily broken, we have upgraded premium quality hex socket screw and bolts to improve the performance.
  • Afranti 80cc bike motor kit fits Most 26″ or 28″ Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be around 1″ (25-29mm).
  • Motorized bike kit Power: 5-6 HP (horse power).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets breaking time, 25:1 after running 300KM. Please use premium quality oils to prolong engine life. And add some lubricant into the air cylinder before starting.
  • Easy to Assemble – Notes:The kit needs basic hardware skills & tools, and it will around 2-3 hours for installation and fine tuning adjustments. If you do not have experience or the first time on installing the motor kit, before installing, please kindly read our instruction and search “80cc bicycle engine kit”video, it will give a big help and troubleshoot a lot of issues during installation process..
Check Stock