ReviewsFraming Hammer Weight

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

Sword Valley Mjolnir - Thor s Hammer Marvel Thor The Dark World Lightning Strike Hammer Cosplay Props Available for Collection

  • 【Gift】Base. Sword Valley 1:1 custom Mjolnir, the hammer body is linked through the entire steel keel. Made by hand-polishing texture three times,....
  • 【Size & Weight】Overall Length：about 17.5" (44.5cm).
  • 【Exquisite Workmanship】Every part including the handle is made independently. High-quality belt is wear-resistant and durable..
  • 【Structural Treatment】 The main body of the hammer is linked through the entire steel keel..
  • 【All-metal production】 Even the accessories used for decoration are all forged from metal. Delicate patterned textures accentuate our....
Check Stock

Kollase Leather Hammer, Leather Carving Hammer, 14.24oz/0.89lb Professional Leather Mallet, Leather Maul with Nylon Straight Head Wood Handle, Leather Crafting Tools and Supplies, Green

  • Size: The leather mallet is 20.2 cm/7.95 inches in length while 5 cm/1.97 inches in diameter..
  • Head: The leather maul’s head is made of nylon. The nylon hammer can produce elasticity when carving leather, making it easier for you to stamp. And the nylon head could also protect other tools when stamping. The straight hammer head allows you to strike from any angle..
  • Handle: The hammer handle is made of solid wood, and the shape of the handle is designed according to ergonomics which makes leather working easily in order to protect uses’ twist. Both the weight and the shape of the handle help to create a better experience for users..
  • Stainless Steel Design: Both ends of the leather hammer head and the tail end of the handle of our leather carving hammer are made of stainless steel. This adds weight to our leather hammer which helps the user to save more labor and protect the wrist when stamping..
  • Choose our leather carving hammer! Choose a suitable leather carving hammer!.
Check Stock

AMBER Athletic Gear Economy Hammer 5.45 Kg

  • BEST QUALITY : Amber Hammers are of excellent quality..
  • HIGH PRECISION: This Iron hammer meets all IAAF specs. Precision turned and balanced for exact size and weight..
  • CONTENTS: Hammer includes a high speed motion swivel, and hammer wire and an aluminum handle..
Check Stock

Huttig-Grip 3-1/8 inches Sinker Nails 12d for Construction Framing HGN12CSKR1 Vinyl Coated Finish 1 lb Pack of 75 Nails

  • Heavy-duty sinker nails for general construction and framing.
  • Flat, countersunk, checkered head to reduce hammer slipping.
  • Vinyl coated finish, diamond point tip, smooth shank.
Check Stock

TRUTUCH Brown Grain Leather Tool Belt | Carpenter Tool Pouch/Belt | 17 Pockets | Drywall Tool Belt | Tool Bag for Handyman | Leather Tool Belt for Men | Construction | Framers | Electrician

  • This Leather Carpenter Tool Belt is 100% Genuine Grain Leather with Thickness of 2.50 mm. Tool Belt Leather is Carrying Total 17 Pockets. 2 large Capacity Tool Belt Pouches,1 Belt, 1 metal Hammer holder & additional smaller size pockets which means that you can carry a large number of tools in this Leather Tool Bag..
  • 4 Loops for your Suspender to carry this Leather Framing Tool belt perfectly. Solid Heavy duty Grain Leather professional Grade Electrician Tool Belt..
  • These leather Carpenter Tool Belts are made of Top Quality Leather having Double Stitching and strengthens additional support. Rivet reinforced stress points and corners for long lasting Durability..
  • Our Construction Tool Belt is Perfectly stitched with Tear and Wear protection. Foam Padded Belt with 3.75 mm thick Leather & adjustable to fit waist sizes from 30 to 47 inches..
  • Framers Tool Belt has Space for every Handy Tool including deep Pockets for Nuts & Bolts, Nail & Screws, Tape measure hanger, Pencil Holders, Hammer Holder and much more..
Check Stock

TRUTUCH Grain Leather Tool Belt | 18 Pockets | Tool Rig Set | Tool Pouch | Drywall Tool Belt | Carpenter Tool Bag | Leather Tool Belts for Men | Construction | Framers | Electrician (Maroon)

  • This Leather Carpenter Tool Belt is 100% Genuine Grain Leather with Thickness of 2.50 mm. Tool Belt Leather is Carrying Total 18 Pockets. 2 Large Capacity Tool Belt Pouches, one side has Double Pockets,1 Padded Belt, 2 Metal Hammer Holders & Additional small Pockets so you can carry a large number of Tools in this Leather Tool Bag..
  • 4 Loops for your Suspender to carry this Leather Framing Tool belt perfectly. Solid Heavy duty Grain Leather professional Grade Electrician Tool Belt..
  • These leather Carpenter Tool Belts are made of Top Quality Leather having Double Stitching and strengthens additional support. Rivet reinforced stress points and corners for long lasting Durability..
  • Our Construction Tool Belt is Perfectly stitched with Tear and Wear protection. Foam Padded Belt with 3.75 mm thick Leather & adjustable to fit waist sizes from 30 to 47 inches..
  • Framers Tool Belt has Space for every Handy Tool including deep Pockets for Nuts & Bolts, Nail & Screws, Tape measure hanger, Pencil Holders, Hammer Holder and much more..
Check Stock

XtremepowerUS 32oz Dead Blow Hammer Dual Head 2lbs Ball Peen Blow Striking Flat Pein Non-Slip Handle, Orange

  • FOR GUNSMITHS: Make precise, repeatable taps with the ergonomic, weight balanced hammer set. This hammer tool set is a must have for any armorers tool kit for firearm disassembly, gun repair and for custom builds..
  • INCLUDES: Premium hammer, four interchangeable hammer head tips, steel hammer tip, rubber, nylon, brass gunsmithing hammer tip, pin alignment tool and molded carry case..
  • GUNSMITH HAMMER: Adjusts easily with the 4 interchangeable driving head faces. Whatever the job is the 4 in 1 design allows you to have a metal hammer, brass hammer, nylon hammer and soft hammer all in one..
  • PIN ALIGNMENT TOOL: Holds even the smallest pins precisely for frustration free tapping..
  • VERSATILE: Gunsmithing hammer is well balanced for precision taps, easy to control and can be also used as jeweler hammer, making crafts or any other DYI projects.
  • ESSENTIAL TOOL: Hammers tools are a must-have in any gun repair tool kit to remove or install pins in order to disassemble, maintain and customize guns..
  • SATISFACTION GUARANTEED: Real Avid backs their products. We are a US based company, and our customer support is easy to reach. Customer satisfaction is our highest priority..
Check Stock

Tool belt with suspenders, Tool belt suspenders, Carpenter tool belt, Framers tool belt, Scaffold tool belt, Construction tool belt, Tool belt pouch, Tool belts for men, Tool belt suspenders for men

  • ✔️ 11PCS-Pro Framers Combo: This construction belt constructs 11 detachable components, including 2 waist tool pouches, 1 Hammer Holster, 1 swivel Drill Holster, 2 tool Belts,4 Belt loops &1 Suspenders..
  • ✔️ Comfortable-Tool Pouch Belt: The padded toolbelt, tool pouches for carpenters & suspenders are Well-Padded & Removable to help distribute the weight evenly. So, You can carry carpenter tools easily..
  • ✔️ Quick-To-Fit: The tool vest for construction is fully adjustable to fit the waist sizes 29"-46". W/ the detachable carpenter vest, u can quickly relocate the carpenter tool pouch 4 yr carpentry tools..
  • ✔️ Easy-Access: These work belts for men construction comes w/ an Orange interior & sizable carpenter pouches for construction. It helps access the tools easily & quickly.-Good construction belts for men.
  • ✔️ Heavy-Duty: It‘a heavy duty tool belt for the fraimer tools. This framing tool belt is made of ballistic 1680D fabric, rugged webbing & Hardware.-A reliable tool pouch vest or tool belt for men.
Check Stock

ABN Wheel Weight Pliers – Wheel Weight Hammer Tool Tire Balancing Weights Tire Weight Removal Tool

  • 3 IN 1 TIRE WEIGHT REMOVER TOOL: Use the ABN Wheel Weight Removal Tool to install, remove, or tighten wheel weights on your tire rims.
  • This wheel weight tool features a hammer, pliers, and crimping tool all in one to allow you to strike, pry, and pinch weights into and out of place (respectively).
  • Fits various types of wheel balancer weights.
  • FITS VIRTUALLY ANY WHEEL WEIGHT TYPE: Easily remove clip-only weights, Asian OE tire weights, traditional wheel balance weights, and other weights on the market.
  • Universal for various rim styles on your mini and full-sized cars, SUVs, off-road vehicles, pickups, and trucks.
  • DESIGNED FOR LEVERAGE: Wheel weight plier tool easily removes wheel weights by hooking into the hole on the weight then using leverage to slide the weight off of the rim.
  • Tire weight tool features a sharp edge to trim clip-on weights, a hammer end to strike tight weights into place, and a crimping V to tighten weights for a secure fit.
  • BUILT TO LAST: Constructed of drop-forged steel, this wheel weight tire hammer tool provides maximum strength and durability, while the chrome finish ensures longevity and resistance to rust and corrosion.
  • COMFORTABLE GRIP: Rubberized PVC-coated handles offer a firm, no-slip grip for a secure hold and comfort when ....
Check Stock

PIILOO Blacksmiths' Hammer Alternative to 0000811-1000 Bladesmith Blacksmithing Forging Knife Making Metal Working Tool

  • DIRECT REPLACEMENT--Alternative to 0000811-1000, with the same performance and function. It can provide the ultimate brute force for hammering, making forging easier and faster..
  • UPGRADED DESIGN--Fix the cross hammer head and handle using wedge structure. The hammer head has chamfered edges, and the hammer surface has a small radius with beveled edge..
  • FEATURES--Cross-peen hammer with one round face and one wedge face for double use. Smooth handle achieve for more comfortable grip, and lengthened design provides better force for hammering while consuming less energy and improving work efficiency..
  • QUALITY MATERIAL--The hammer head is made of special alloyed steel with heat treatment, black powder coating, high hardness and good toughness, impact resistance and high temperature resistance. The handle has great strength and flexibility, not easy to split and crack, long service life..
  • DIMENSION & SERVICE--Head weight: 2.2 lbs (1000g) | Handle weight: 0.44 lbs (200g) | Handle length: 14.57 inch. PIILOO offer 100% new and quality product and best customer service to every customer.....
Check Stock