ReviewsFraming Screws

Pneumatic Framing Nailer NEU MASTER 21 Degree Ergonomic Framing Nail Gun with Tool-Free Depth Adjust & No Mar Tip & Carrying Case Drives 2 to 3-1/2 Framing Nails

• 【Versatile & Poweful】Pneumatic 21 degree 3-1/2" full round head framing nailer is powerful for framing, sub flooring, trusses and roofing, roof....
• 【Pneumatic Framing Nailer】 Compatible with 21 degree plastic collated full round head framing nails 2 inch up to 3-1/2 inch. Meet the needs of....
• 【Depth Adjustment & No Marring】The framing nailer come with depth adjustment knob and a no mar tip, that allows to adjust the firing depth for....
• 【Lightweight & Ergonomic Design】 Pneumatic framing nailer features magnesium body, only 8.5 lbs, lightweight and durable enough for framing....
• 【Warranty & Service】The kit Includes a framing nailer, a wrech kit, air tool oil, sturdy BMC carrying case, shield glasses and no-marring tip. NEU....

Chudley and Greeno's Building Construction Handbook

• On-top of joists installation - keep framing and under deck area dry..
• Easy to install - 1. Staple on top of joists 2. Self sealing tape over joints 3. Screw downspouts to water evacuation holes..
• Material cost is about $ 2/s.f. (Goberco membrane is about $1.5/s.f., self sealing joist tape is about $0.4/s.f. , regular downspout + plastic gutter + roofing screws are low cost)..
• Save Time / Reduce Leaks - Fold against house wall for flashing (reduce leaks at ledger board) - Deep channel valley between joists - Regular downspout redirect water flow into a gutter (prevent water dripping / no special downspout needed). U.S. patent # 9,453,338.

IRWIN Tools Framing Square, Aluminum, 16-Inch by 24-Inch (1794448),Silver

Calculated Industries 8455 HammerHelper Pro Nail Puller Accessory | Doubles Pulling and Prying Power | Fits Any Claw Hammer or Pry Bar | Magnetic Nail Set | Patented Nail Remover | Durable Aluminum

• DOUBLES YOUR HAMMER’S NAIL PULLING POWER – patented tool puts physics on your side to turn any standard claw hammer into a powerful nail removal tool, ideal for remodels, deck rebuilds, wood reclamation..
• PULLS NAILS WITH HALF THE EFFORT – and with less time. Also works to remove stripped screws, extract fence staples and more. Especially effective for removing fasteners at awkward angles where your strength is reduced..
• FITS ANY CLAW OR FRAMING HAMMER – steel ring slips over claws and rare earth magnets hold it in place to easily fit on Estwing, Craftsman, Vaughan, Irwin and other common framing and claw hammers..
• DOUBLES LEVERAGE FOR PRYBARS TOO! Use it with crowbars, flat bars, and other prying tools to lift, shift and move. Also great for busting pallets, reclaiming fence or barn wood or any rough demolition work..
• DURABLE and VERSATILE MULTI-TOOL made from high strength aircraft-grade aluminum is built to last! Also works as a nail-set for tight spaces and even includes a bottle opener! Fits easily in pouch, pocket or toolbox. Comes with a full 1-year warranty..

Combo Pack: Floater Frame + inch Stretched Canvas for Painting, 1-3/8" Frame + 3/4" Blank Canvas 12oz Primed 100% Cotton Canvas Fabric (Natural Oak, 24 x 48 inch)

• COMBO PACK: set of 1 Pixy Canvas Floater Frame + 1 Stretched Canvas for Painting.
• FLOATER FRAME: fits 5/8” (0.625"), 3/4" (0.75") and up to 7/8” (0.875") deep artwork. Floating canvas frame is perfect choice for framing canvas paintings, wood panels, canvas panels, canvas boards, stretched canvas or even mounted photo prints. Frame provides 1/8" gap between floater frame and painting. Floater frame is 1.375 inch thick with 3/8-inch-wide edge of the face on the frame. Frame is made from PS (polystyrene) foam material. There is NO glass included or needed for framing Canvas.
• STRETCHED CANVAS: 12oz Primed ready-to-use 100% Cotton Canvas Fabric stretched on 3/4 (0.75) inch strong and durable Solid Wood Canvas Frame.
• HARDWARE: includes 1/2" one-hole offset clips, 1/2" deep screws, 2 D-ring hangers and wire. Use standard screwdriver to attach your artwork to floater frame.
• SIZE INFO: Size in the description is canvas size to fit in Floater Frame (inner dimensions). Floater Frame has 7/8" edge (rabbet) for artwork sit on the frame and attach it.

MURPHY DOOR 30 inch x 80 inch Flush Mount Assembled Maple MDF Unfinished Interior Bookcase Door

• Unit includes: fully functional cabinet door, including state of the art ball bearing design for smooth operation, jamb, trim, hardware, instructions....
• In swing doors will lose 6" of pass through. Out swing doors will lose 10" of pass through. You will need a RO (rough opening 2" taller and wider than....
• The doors can come unfinished, allowing you to match colors with your current décor.
• Final Jamb assembly and Hardware installation required. Hinge position templates provided..
• Must fasten to structural framing to secure properly.
• requires installation. Installation screws are included..

Creative Mark Museum Collection Plein Aire Frames - Black & Gold Museum Quality Plein Aire Frames for Photos, Artwork, Paintings, & More! - 9x12

• FEATURES: Hand-finished and leafed by expert craftsmen (closed corner frames), includes hanging hardware (screws, D-rings, and wire), distinct and luxurious black & gold undertone finish, heavy, quality wood, with closed, seamless corners reinforced from the back, and rich color, well made heavy wood frames.
• PERFECT FOR: High end professional quality, adds prestige to any piece of art, museum quality framing solutions, and complimenting any genre of artwork.
• EASY ASSEMBLY: The Creative Mark Museum Collection Plein Aire Frames are known for their easy setup with D-ring hangers, screws, and wire included for the frames.
• DIMENSIONS: Each frame has a rabbet depth of 9/16" with a 3-1/2" wide border and and overall depth of 1-3/8".
• Best economically priced frames for this professional quality.
• VARIETY: These closed corner frames come in various sizes including: 5x7", 6x8", 8x10", 9x12", 11x14", 24x36", and more, in a stunning black and gold finish.

TWIN-TOWN 3 pack Carbide Teeth Oscillating Multitool Blade Carbide Saw Blades for Hard Material/Metal/Nails/Bolts/Screws

• 3 PCS 1-3/8 inch (34mm) Carbide Teeth Oscillating Saw Blades.
• Titanium Coating: 30% longer life than standard bi-metal blades.
• Hard Materials Applications: Steel, deck screws, framing nails, flushing cutting nails & rusted bolts.
• Universal Fit System, adapts to Fein, Bosch, Black and Decker, Porter Cable, Chicago Tools Craftsman, Milwaukee, Dewalt, Makita, Skil, Rockwell and more.
• Thick gauge metals and high quality manufacturing techniques insure superior wear tolerance and long cutting life.

BOSTITCH Framing Nailer, Round Head, 1-1/2-Inch to 3-1/2-Inch, Pneumatic (F21PL)

• Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications.
• Patented push button adjustable depth guide of the framing nailer gun sets nails to desired depths.
• Lightweight magnesium design for durability.
• Adjustable rafter hook allows users to hang tool on rafters and joists.
• Drives plastic collated 1-1/2-inch and 2-1/2-inch metal connector nails (.131-inch - .148-inch diameter).
• 2 nailers in one: includes two quick change nosepieces, converts to framing or metal connector applications.

Fletcher-Terry FrameMaster Picture Framing Driver Points (Permanent)

• PERMANENT ARTWORK ASSEMBLY: This quality framing point, when used with Fletcher’s Framers Point Driver, will permanently hold glass, artwork, and backing materials in place. Get that high-quality art gallery appearance without extra work or effort. This driver point system provides permanent, secured assembly for all of your favorite pieces..
• FRAME PICTURES LIKE A PROFESSIONAL: Our FrameMaster Driver Point, along with our Framers Points, is the only assembly method you need to make your art, pictures, or wall hangings appear as if they have been framed by a professional. And don't worry: this tool fires perfectly flat into your frame. Create a beautiful wall gallery in your home or office with this high-quality framing tool!.
• MAKES FRAMING FAST & EASY: Is framing your photographs or beautiful artwork a chore you keep putting off? Our picture frame hardware makes it a cinch to turn your blank walls into a beautiful art display. The high-quality driver features an easy-to-load magazine and holds 100 points for increased productivity—no electrical or pneumatic hook-up required. You'll be done before you know it!.
• QUALITY YOU CAN DEPEND ON: You can count on tried-and-true Fletcher-Terry quality when you use our framing hardware on your most treasured pi....

D Ring Picture Hangers with Screws - 100 Pack - Bulk D Rings - Pro Quality d-Rings - Picture Hang Solutions

• Pro Quality D-Ring Hanger will support 10 pounds. Frame back hanger for wood picture frames..
• 1 3/16" Long x 5/8" Wide D-Ring Picture Hanger. Bulk pack includes 100 hangers.
• Framing supplies kit includes 100 #6 x 1/2" Combo Top Slotted/Phillips Screws.
• Our D-Rings have the most inside wire or ring wrapped around the strap which makes this heavy duty picture hanger stronger than others.
• D-Ring hanger with doubled over steel strap will support 10 pounds.