ReviewsFrequency Counter With Usb Interface

NETGEAR N150 Wi-Fi USB Adapter WNA1100

  • Wi-Fi Standard-IEEE 802.11n (draft).Wireless Security-WEP .WPA-PSK .WPA2-PSK..Physical Characteristics-Depth-2.4..
  • ISM Band-Yes.Interfaces/Ports-Host Interface-USB.Physical Characteristics-Weight (Approximate)-2.61 oz..
  • ISM Maximum Frequency-2.40 GHz.Physical Characteristics-Height-0.3. System Requirements:Intel Pentium class PC.Available USB 1.1, USB 2.0, or USB 3.0....
Check Stock

Ranjaner 1Hz-50MHz Frequency Counter Kit, DIY Module Board for Oscillator, Crystal Measure Frequency Meter Accessories

  • You can use the universal USB 5V interface power supply, can also use an external DC power supply or 9V battery..
  • The number of components is small, all straight-line components, installation and commissioning simple..
  • Addition and subtraction frequency settings for the measurement of radio transceivers and other equipment..
  • You can select the power saving mode, if the frequency is not obvious changes within 15 seconds automatically turn off the display..
  • Measurable frequency range 1 Hz -50 MHz. Can measure the oscillation frequency of most commonly used crystal..
Check Stock

Rockville RockMix 5 Channel Pro Mixer w/USB Interface, Bluetooth, Echo, EQ

  • ...m the legendary mixers that came out in the 1950’s, 60’s and 70’s. Dimensions (inches): 5. 31” x 3. 94” x 1. 57"..
  • Specifications: Mic: 1mV/1. 7 KΩ(Gain max), Line, channel 1: 3mV/10KΩ(Gain max), Line, channel 2/3: 300mV/22KΩ, Line channel 4/5: 300mV/22KΩ, Output level: 5. 8V max (MAIN.
  • TAPE), Frequency range: 20 -25000 Hz, THD: ≤0. 05%, S/N ratio: 81dB, Equalizer, Bass range: 15dB/80Hz, High range: 15dB/12kHz, Headphone impedance: ≥16Ω, USB interface: USB 2. 0 full speed and earlier (also 1. 1 compatible), 16-Bit Delta-Sigma, 44. 1kHz Sampling rates.
Check Stock

Liyafy 1Hz-50MHz Crystal Oscillator Tester Frequency Counter Tester Measuring Meter Case Durable DIY Led Kit

  • High abrasion resistance, sturdy and durable, Transparent casing effectively protect the Frequency Counters body..
  • Programmable addition and subtraction frequency setting for the measurement of radio transceiver and other equipment..
  • Automatic range conversion, without human switch.
  • Can measure most commonly used crystal of oscillation frequency..
  • The power saving mode can be selected. If the frequency is not changed automatically in 15 seconds, the display will be closed automatically..
  • The power supply range is wide, which can be powered by USB interface of general motors, or 5-12v or 9V battery for external power supply..
Check Stock

Audio Technica AT2020 Cardioid Condenser Studio XLR Microphone for Vocals, Podcasting, Livestreaming Bundle with Blucoil Portable USB Audio Interface for Windows and Mac, and 10-FT Balanced XLR Cable

  • CAPTURES EVERY NUANCE OF VOCALS AND ACOUSTICS - The Audio Technica AT2020 features a 16mm low-mass diaphragm that captures every sonic detail across the 20Hz-20kHz frequency range..
  • PROVIDES BETTER NOISE ISOLATION - The cardioid polar pattern of AT2020 reduces the sound pick-up from the rear and sides. You can record vocals and instruments clearer with this mic!.
  • DELIVERS CRISP AUDIO RECORDING - Create high-quality audio content with the Blucoil USB Audio Interface. It provides 24-bit/48kHz resolution and 48V phantom power. Plug AT2020 or an instrument in the interface and record directly on a Mac/Windows PC..
  • OFFERS DIRECT MONITORING - Turn on the Direct Monitor switch and listen to the mic/instrument input signal in real-time without any latency via headphones. The Blucoil Interface also offers 1/4" outputs if you wish to monitor via studio monitors and speakers..
  • INCLUDES - Audio Technica AT2020 Cardioid Condenser Studio XLR Microphone.
  • Soft Pouch. Blucoil Portable USB Audio Interface with 48V Phantom Power for Windows and Mac.
  • 3M Adhesive Pads. Blucoil 10-Foot Balanced XLR Cable - Premium Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to....
Check Stock

MACH3 Controller USB MACH3 100Khz Motion Controller Card Breakout Board Controller Card for CNC Engraving Servo Motor Stepper Motor Servo motor

  • 【Functions】The function of this motion control card includes that it supports automatic probe tool, emergency input, limit switch, and supports....
  • 【4-axis Linkage】Usb interface board supports for 4-axis linkage, you can connect four stepper motor drives or servo drives. 4 general-purpose....
  • 【Wide Use】The maximum step-pulse frequency of motion control card is100KHz, which is very suitable for CNC Engraving, Servo Motor, Stepper Motor....
  • 【Advantage】The motion controller needs using external 24V DC power to isolate USB and external port, and to make the system more stable. And it....
  • 【Drive Output Interface】The 4 general-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts,....
Check Stock

Portable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function

  • 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
  • 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
  • 【Tiny Spectrum analyzers & ESD Function】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life..
Check Stock

Portable tinySA Spectrum Analyzer - AURSINC Hand Held Frequency Analyzer 2021 Upgraded V0.3.1 | 100kHz to 960MHz MF/HF/VHF UHF Input | ESD Protected Function & 2.8 inch Touchscreen | Signal Generator

  • ...are installed which will be more stable and sensitive with higher antistatic level and longer service life. Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.
  • [Frequency Range] Spectrum analyzers like the tinySA use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes..
  • [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer. Color display showing 290 scan points covering up to the full low or high frequency range.
Check Stock

Portable tinySA Spectrum Analyzer - AURSINC Handheld Frequency Analyzer V0.3.1 with Antenna SMA Male to UHF Female Cables & 30db Attenuator MF | HF | VHF UHF Input for 0.1MHZ-960MHz 2.8'' Touchscreen

  • ...protected" meaning the diodes are installed which will be more stable and sensitive with higher antistatic level and longer service life. NOTE: Due to the old inventory might mix with the new batch, and If you got the old version Tiny spectrum analyzer and want a new one, you could apply a replacement for it..
  • [Frequency Range] Spectrum analyzers like the Tiny spectrum analyzer use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes..
  • [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The Tiny spectrum analyzer contains all the components of a conventional heterodyne swept spectrum analyzer. Color display showing 290 scan points covering up to the full lo....
Check Stock

PreSonus AudioBox USB 96 25th Anniversary Edition USB Audio Interface with Studio One Artist Bundle with Blucoil Cardioid Condenser Studio XLR Microphone, Pop Filter, 10' XLR Cable, and 5x Cable Ties

  • ... the complete DAW experience. Easily record and compose masterpieces with AudioBox USB 96!.
  • ENSURES CLEAR SOUNDS, LOW NOISE - The Blucoil Studio XLR Microphone features a cardioid condenser capsule and low 15dB self-noise. It captures audio accurately across the 30Hz-18kHz frequency range without injecting color into your tone..
  • INCLUDES - PreSonus AudioBox USB 96 25th Anniversary Edition USB Audio Interface.
  • Downloadable Studio One Artist. Blucoil Cardioid Condenser Studio XLR Microphone.
  • Mic Pouch. Blucoil Audio Microphone Pop Filter Double Layer Mask Shield with Stand Clip Stabilization Arm, Swivel Mount. Blucoil 10-Foot Balanced XLR Cable - Premium Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to-Female). 5-Pack of Blucoil Reusable Velcro Cable Ties..
Check Stock

Orange Pi 4B Rockchip RK3399 4GB LPDDR4 Six Cores 64 Bit with 16GB EMMC Single Board Computer, Open-Source Board Support Android, Ubuntu, Debian (Pi 4B)

  • Orange Pi 4B adopts Rockchip RK3399 (64-bit 6-core ARM system), specifically dual-core Cortex-A72 (large core) + quad-core Cortex-A53 (small core), the main frequency can reach up to 2.0GHZ, with super strong Processing power, with Mali-T864 high-end GPU graphics processing, support for dual cameras, binocular visual ranging, support for SATA and SSD expansion, support for 4K output, etc. Note: Our shipping time generally takes 15 days, Not as long as Amazon suggests..
  • Orange Pi 4B Open-Source Board Built-in SPR2801 (NPU) artificial intelligence processor, with dual-channel 4GB LPDDR4 memory, 16GB high-speed EMMC storage. And it also cited quite rich interfaces, 40Pin headers, headphone interface, camera interface, LCD interface, DC, TypeC, Battery power supply interface, 2* USB 2.0 HOST interfaces, 1* USB 3.0 HOST interfaces, 1* USB 3.0 Type-C interfaces and other high-performance Data transfer and display interface..
  • This development board is based on the Big Little architecture in terms of running speed, it has an independent NEON co-processor, which is widely used in tablet computers, game boxes, drones, Personal Internet mobile devices, VR, advertising machines and other intelligent terminal equipment. The powerful performance configuration will b....
Check Stock