ReviewsFrsky Receiver Range

BETAFPV Meteor65 1S Micro FPV Whoop Drone Quadcopter for FPV Racing Freestyle Flight Indoor Outdoor with F4 1S 5A Flight Controller 0802SE 19500KV Motor C03 Camera - Frsky

• ... weight, durability, and premium build design..
• 【F4 1S 5A FC】The flight controller of Meteor65 has been upgraded to F4 1S 5A SPI Frsky V3.0. with a high-quality BMI270 gyro and BB51 ESC hardware. Reserve two UART ports, frsky version also can be used as the PNP version. Therefore, pilots can connect the external receiver to it..
• 【Power System】By using the latest 0802SE 19500KV motors and 31mm 3-blade props, this equipment ensures excellent performance of power and thrust. Makes the perfect dynamic balance, which gives the drone more flexibility and longer flying time..
• 【Camera&Canopy】Built-in 1.52g ultralight weight C03 camera, offer a high-quality, clear and sharper images to pilots. Adopted with a injection molding canopy which only 1.60g, more durable, anti-ruin, and heat-resitant, gives your whoop drone a good protection..
• 【BT2.0 Connector】BT2.0 connector has decreased internal resistance of connector effectively allowing more current to be transferred, which means it supports 9A continuous current (15A burst). Pilots can enjoy more flight time without disturb of low voltage warning due to reducing voltage sag. Get stronger power and longer flight time on 1S brushless drones..

FrSky 2000mAh 7.2V NiMH AA Battery Pack for Taranis Q X7 Transmitter

ZHIPAIJI for Pixhawk Yaapu Telemetry Converter Cable for FRSKY Taranis X9DP X10S X12S QX7 X7S Transmitter X8R X4R XSR R-XSR S8R XSR Receiver (Color : 1PC)

• This cable can converter for FrSky telemetry from your flight controller(for Pixhawk1, 2, 3, 4) to the receiver (X8R/X4R/R-XSR/X6R/S8R/RX8R/X4RSB/XSR).

BETAFPV F4 1S Brushed Flight Controller with SPI Frsky D8 Receiver Support OSD Customized RGB Lights with 55mm BT2.0 Connector Power Cable Compatible for 1S Brushed Drone Like Beta65S

• 【Upgrade】Classical BETAFPV F4 1S brushed flight controller V2.0 comes back with a new cross particular shape, and it adopts BT2.0 connector cable instead of BT2.0. It is compatible with Beta65S 1S brushed whoop drone..
• 【Protocol】Build-in CC2500 chip, the default protocol is configured to Frsky D8 out of the factory and can be adjusted to  Frsky D16 FCC, Frsky D16 LBT, or Futaba. Pilots could set up the protocol according to their needs in Betaflight Configurator..
• 【Cable】The power cable applies BT2.0 connector instead of PH2.0, which solves the problem of voltage sag, and the discharge can be more efficient, bringing this board a better performance on function for power and responsiveness..
• 【RGB】It supports custom RGB lights on the Betaflight configuration, you can DIY it by your hobby, which makes your drone unique from others..
• 【Support】Firmware and Cli Dump file for F4 Brushed Flight Controller, some basic guidance and typical FAQ, please visit our official website..

SAUJNN Jumper T8SG Plus V2.0 Hall Gimbal OLED Display Advanced Multi-protocal Transmitter JR/FrSKY Compatible Module

• High Quality Universal RC Controller Carrying Case Bag for Jumper WFLY RadioLink FrSky Transmitter.
• Durable, portable and lightweight, fit for most RC radio transmitter, like Jumper T8SG Plus V3, T12 Pro,T16 Pro Hall V2, T18 T18 Pro, T18 Lite, WFLY WFT07, WFT09, ET07, WFT07, RadioLink AT9, AT9S, AT10 and FrSky X9D.
• Two-way z1pper design and rubber handle , well protect your device from bumps dents and scratches.
• High-density foam interior with pre-cut compartments for the transmitter and accessories.
• Note: Some transmitter might require trimming of the foam insert to fit properly.

Pyle-Pro PDWM2550 19'' Rack Mount Dual VHF Wireless Rechargeable Handheld Microphone System

• Professional VHF 2 Channel Wireless System - 2 Handheld Microphones Included - Dual Telescoping Receiver Antennas - Dual Volume Controls with Digital Readout - Dual Charging System - 1/4'' Individual line outputs & Mixed 1/4'' Outputs.
• On/Off Broadcasting Switch - Dynamic Range: 100dB.
• Signal to Noise Ratio: 105dB - Receiver Power Supply: AC 110/240V - Microphone Power Source: 8. 4 Volt Rechargeable.
• Receiver Dimensions: 1. 8'' X 18. 9'' X 1. 3'' - Microphone Dimensions: 9. 6'' X . 7" X 0. 5''.
• Professional VHF 2 Channel Wireless System - 2 Handheld Microphones Included - Dual Telescoping Receiver Antennas.
• Dual Volume Controls with Digital Readout - Dual Charging System - 1/4" Individual line outputs & Mixed 1/4" Outputs.
• Frequency Response: 40Hz~18 kHz - Operation Range: 50-180 Meters.
• Signal to Noise Ratio: 105dB - Receiver Power Supply: AC 110/240V - Microphone Power Source: 8.4 Volt Rechargeable.
• On/Off Broadcasting Switch - Carrier Frequency: 210-270Mhz - Dynamic Range: 100dB.

1Mii B06Pro Long Range Bluetooth Receiver, HiFi Wireless Audio Adapter, Bluetooth 4.2 Receiver with 3D Surround aptX Low Latency Optical RCA AUX 3.5mm for Home Stereo System

• 【DUAL ANTENNAS&LONG RANGE】With dual antennas and class 1 Bluetooth technology, the 1Mii B06 Pro Long Range Bluetooth receiver can achieve a range of up to 197ft (60m) line-of-sight in the open air and up to 50-70ft (20-30m) indoors(without obstacles). NOTE: operation range can be affected by Wi-Fi routers or antennas on the stereo receiver, etc..
• 【APTX LOW LATENCY&3D AUDIO】1Mii B06 Pro Bluetooth receiver for home stereo features CSR Bluetooth 4.2 chip to ensure high fidelity transmission of Bluetooth audio signal for music streaming to those speakers or home stereo systems that doesn’t have the capability. This Bluetooth adapter also supports apt-X and apt-X Low Latency (apt-X-LL). And the 3D audio can be switched on or off by pressing the “3D” button on the Bluetooth audio receiver. The green LED will be on when switched to 3D audio..
• 【VOLUME & TRACK ADJUSTMENT】Press the volume button on the 1Mii B06 Pro Bluetooth receiver to volume up and down. Press and hold the volume button for 2 seconds to do next or previous track. (NEW FUNCTION).
• 【OPT&AUX, EASY SETUP】Easy plug, pair and play. Plug into computer speakers, home stereo systems or other speaker systems via the 3.5 mm, RCA or optical cable, then pair the B....

1Mii Bluetooth Receiver, Bluetooth 5.0 Receiver Long Range HiFi Bluetooth Audio Adapter w/ 3D Surround aptX Low Latency HD Optical RCA AUX 3.5mm Coaxial for Home Stereo Sound System – B06Pro Gray

• 【DUAL ANTENNAS LONG RANGE】With dual antennas and class 1 Bluetooth technology ensure that the 1Mii B06Pro Long Range Bluetooth receiver can achieve a range of up to 197ft (60m) line-of-sight in the open air and up to 50-70ft (20-30m) indoors(without obstacles). NOTE: operation range can be affected by WiFi routers or antennas on the stereo receiver, etc..
• 【APTX LOW LATENCY&HD&3D AUDIO】1Mii B06Pro Bluetooth receiver for home stereo features QCC3031 Bluetooth 5.0 chip to ensure high fidelity Bluetooth audio signal for music streaming to speakers or home stereo systems that doesn’t have the capability. This Bluetooth adapter also supports aptX HD and aptX Low Latency. And the 3D audio can be switched on or off by pressing the “3D” button on the Bluetooth audio receiver. The green LED will be on when switched to 3D audio..
• 【VOLUME BUTTONS】Press the volume button on the 1Mii B06Pro Bluetooth receiver to volume up and down. Press and hold the volume button for 2 seconds to do next or previous track..
• 【OPT&AUX&COAXIAL】Easy plug, pair and play. Plug into computer speakers, home stereo systems or other speaker systems via the 3. 5 mm, RCA, coaxial or optical cable, then pair the Bluetooth receiver with the Bluetooth audio devices such as sm....

Dogtra ARC Additional Receiver Slim Ergonomic 3/4-Mile Remote Dog Training E-Collar with 127-Level Precise Control via LCD Screen

• ERGONOMIC DESIGN: The design of the ARC receiver is sleek and slim, which allows the collar to strap around the receiver and your dog’s neck....
• IPX9K WATERPROOF CERTIFIED: The ARC receiver is IPX9K waterproof certified, which means it passed the International Protection Marking system.....
• 3/4-MILE RANGE: The range of this training receiver is perfect for many situations and all simple training commands for your dog. With a range of....
• DOG SIZING: This receiver is perfect for dogs that are 15 lbs. or more.  With a medium output and the ability to expand to two dogs, the ARC is the....
• CORRECTIONS: This e-collar has two different correction types. The first option is a Nick (quick ½-second) and the second option is a Constant....

1Mii B06Pro+ Bluetooth Receiver, Hi-Res Bluetooth 5.1 Wireless Audio Adapter w/ LDAC for Home Stereo, Long Range HiFi Bluetooth Receiver aptX HD Low Latency aptX Adaptive Volume Control LCD Display

• 【Upgrade Your Old-fashioned Speaker System】Install this 1Mii B06Pro+ Bluetooth receiver to an older stereo receiver without Bluetooth, stream audio from your smart phone or tablet, listen to high-definition music wirelessly..
• 【Bluetooth 5.1】1Mii B06Pro+ Bluetooth receiver for home stereo features the premium Bluetooth 5.1 chip to ensure high fidelity Bluetooth audio signal for music streaming to speakers or home stereo systems that doesn’t have the capability. This Bluetooth audio adapter supports aptX Low Latency, aptX HD adaptive..
• 【LDAC Hi-Res Audio】The B06Pro+ Bluetooth audio adapter features the LDAC audio codec transmitting at the maximum bitrate of 990kbps, delivering uncompromised high definition sound quality..
• 【Dual Antennas Long Range】 With dual antennas and class 1 Bluetooth technology, the 1Mii B06Pro+ Long Range Bluetooth receiver can achieve a range of up to 197ft (60m) line-of-sight in the open air and up to 50-70ft (20-30m) indoors(without obstacles). NOTE: operation range can be affected by WiFi routers or antennas on the stereo receiver, etc..
• 【Volume Control&LCD Display】Press the volume button on the 1Mii B06Pro+ Bluetooth receiver to volume up and down. Press and hold the volume button for 2 seconds to do next o....

Sewell Direct SW-30471 BlastIR USB Adaptor, IR Repeater 1 Receiver/Emitter

• Allows you to use a remote for your receiver in another room.
• Comes with 1 receiver, emitter, and USB power adaptor.