ReviewsFtp Pipe Thread

National Hardware N222-463 2193BC U Bolt in Stainless Steel

  • Inside Width/Compatible Pipe Diameter: 1 inch.
  • Used to secure pipe, conduit, cable or other cylindrical objects.
  • Requires pre-drilled holes (hole should be the same diameter as the threaded post).
  • Thread Type: Coarse, Thread Class: UNC-2A, Point Style: Blunt.
Check Stock

Anderson Metals 56120-0806 Brass Pipe Fitting, Adapter, 3/8' Male Pipe x 1/2' Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. Please see NPT Thread - chart to determine the correct size required. Pipe Size and actual Thread OD are different. The Thread OD is larger than the Pipe Size..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Hooshing Brass Pipe Fitting, 1/2' Female to 1/2' Male Pipe Nipple Extension Connector Fitting, Hex Bushing Adapter, Reducer Adapter, Solid Brass Length 1.97 Inch/50mm

  • 【Material】High quality soild brass for corrosion resistance, high temperature ductility and low magnetic permeability. Strong and durable..
  • 【Size】1/2 Inch Female x 1/2 Inch Male Thread, the thread is NPS, have no tapered. It's straight thread..
  • 【Extension Design】Length: 1.97 Inch/50 mm, can be used to extend the length of the pipe or fitting.Deeper and smoother threads makes work easier and more efficient..
  • 【Widely Applications】Use to extend shower fixtures/arms through walls, extend tub spouts.Also be used with grease, fuels and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
  • 【Note】Brass pipe fittings for connecting pipes or fittings of different thread types, can be used in wet environments.Not recommended for potable water..
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

6505-08-08 Hydraulic Fitting 1/2\ Female JIC Swivel X 1/2\ Male Pipe Carbon Steel

  • 6505-08-08 HYDRAULIC FITTING 1/2" FEMALE JIC SWIVEL X 1/2" MALE PIPE (Tube O.D. / Hose I.D. Size).
  • THREAD SIZES FOR 6505-08-08 HYDRAULIC FITTING 3/4"-16 FEMALE JIC SWIVEL X 1/2" MALE PIPE.
  • THIS PART NUMBER IS OFTEN REVERSED IN THE INDUSTY. PLEASE VERIFY THE THREAD SIZES BEFORE PURCHASING.
  • TO MEASURE THREAD SIZE, CALIPERS WORK BEST.
Check Stock

Ruiwaer 1/2 inch NPT Thread Forming Taps Round Shank with Square End

  • The products are forged from high-quality bearing steel, with good surface treatment, high strength and good toughness..
  • Size of square end of product: 0.55 x 0.55 inch..
  • 1/2'' NPT pipe joint is mainly used for cleaning and thread chasing..
  • The product is mainly aimed at the repair of threads such as rust, fracture and slip of water pipe joints..
  • The product includes: 1 cylindrical pipe thread tap. Please pay attention to the finished size when purchasing..
Check Stock

HANMCE Rubber Sealing Tape Waterproof Tape White, 4in × 5ft (W×L), Outdoor Waterproof Leak Proof Repair Tape for Pools,Sink and Various Pipelines

  • You Will Get: there are 20 rolls of PTFE tapes in blue, with the size of 1/2 inch x 59 feet, sufficient quantity can meet your using and replacement needs.
  • Reliable Material: the plumbing tape is made of PTFE material, which is safe and reliable, high temperature and corrosive resistant, with strong anti aging ability.
  • The tape has good toughness, strong ductility, not easy to break, ensuring the sealing connection is more reliable.
  • Wide Usages: the PTFE thread tape is suitable for most plastic and metal pipe, fitting for both hot and cold water pipe, applied to isolate air and water, forming a tightly seal between the threaded pipes and parts.
  • Convenient to Use: the thread seal tapes are convenient to use.
  • Just clean the 2 threaded connections that need to be sealed.
  • Then wrap the end of the tape around the inner screw joint in the same direction as the rotation direction of the 2 joints.
  • And screw the external thread connector to the internal thread connector wrapped with tape and tighten.
  • Warm Reminders: recommended wrapping the pipe seal tape according to the threading direction, otherwise, it will affect the sealing performance.
  • If the thread sealing is not good, you can increase the thickness of the tape.
Check Stock

Rotary Breather Tube Set Fits B&S 692187 & 692189

  • ✅ Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT1 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the RT1..
  • ✅ Unlike traditional thread repair tools that come in standard sizes, the RT1 is an all-in-one tool that eliminates the need for switching when you’re working with both external and internal threads..
  • ✅ The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
  • ✅ Ideal for restoring Inch, Metric, Pipe, Male, and Female Threads made out of Metals, Hardened Metals, Ceramics, Glass, and Plastics, the RT1 has become the go-to thread repair tool for both home improvement enthusiasts as well as industry professionals..
  • ✅ Our US Patended and Engineered Rotary thread file is great for home projects, industrial, automotive, farm & ranch, and technicians. Purchase with peace of mind with our 24/7 friendly customer service..
Check Stock

Female NPT/FNPT to KF16 Flange Fitting (ISO-KF KF16 QF16 NW16) (1/2\ FNPT x KF16)

  • B side: 1/2" FNPT tapered thread, follow USA standard.
  • Pipe sizes do not refer to any physical dimensions.
  • A 1/2" NPT pipe thread when you measure it. It is actually 0.84" instead of 1/2".
Check Stock

Apache 98441022 1/4\ Quick Disconnect Pressure Washer Adapter Set

  • Includes: 1/4" Quick Disconnect Plug x 1/4" Male Pipe Thread Adapter, 1/4" Quick Disconnect Socket x 1/4" Female Pipe Thread Adapter.
Check Stock