ReviewsFuel Conversion Kits

Baldwin Hardware 5399.003.H Conversion Kit

Color/Finish: Lifetime (PVD) Polished Brass.
For active Sectional and Escutcheon handlesets (except Tahoe) with Interior Levers including Single Cylinder (LHRH) and Double Cylinder (LRDB) sets.
Each conversion kit includes tailpieces (if necessary), thru-bolts, strike plate, and instructions for modifying Images Lock sets for use on doors either 2″ (51mm) or 2-1/4″ (57mm) in thickness. (Must specify finish.).

Check Stock

Vortex CK6317 Racing Sprocket Kit , Black

All Vortex Performance Links chain kits are ready to install and require no chain cutting.
Vortex Performance Links chains are made in Japan to the highest quality specifications in the industry.
SV3 Series chains feature a dual pocket sealing system resulting in up to 7 times longer wear life compared to standard o-ring chains.
All chains in these Vortex kits include a rivet type master link, clip type links are also available (sold separately).
HFRS (Hyper Fast) 520 conversion kits with 1 down in front, 2 up in rear gearing with laser cut steel rear sprocket..

Check Stock

XtremeVision LED CanBus Super Decoder - Error Code Canceller - Anti Flicker Capacitor (1 Pair) - H11 / 880 / H9 / H8

...kering issues, certain car model require different type of canceller containing a capacitor or resistors. Please contact us for support if you have issues.DescriptionXtremeVision LED Canceller Capacitors.
XtremeVision LED canceller capacitors are a solution choice when It comes flickering issues when installing LED conversion kits. Our LED canceller capacitors are only require by certain vehicles, that is why they are sold separately from LED conversion kits. It may solve flickering issues for most vehicles including: Ford, Cadillac, BMW, Chevrolet, Chrysler, Dodge, Hyundai, Jeep, Mercedes Benz, etc. The canceller capacitors are fully Plug-and-Play, allowing for a quick and easy installation..
Note: If Error Code Canceller Capacitor is not compatible in solving the error/flicking issue, please try our load resistor instead which solve most issues for LED applications..
HID-Warehouse is the only authorized reseller of XtremeVision products.

Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

...0℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..

Check Stock

Monster Jam 2020 Spin Master 1 64 Diecast Monster Truck with Wristband Legacy Trucks Grave Digger

Kit Includes everything needed to do a full conversion: These Stainless Steel Screw Kits are 100 percent complete.
NO MORE BENT or rusted or corroded screws: These are Stainless Steel Screw Kits.
Stainless Steel Screw Kits are far superior to the screws that come stock with your RC.
For Screw Installation and Notes - see product description.
axi024 - Genuine RCScrewZ Kit - for Axial Kit AX90055 - 310+ pieces.

Check Stock

HiSport Fuel Injector Rebuild Service Kits for Universal EV1 Engines Injector O-Rings, Injector Spacers, Injector Retaining Pintle Caps, Injector Micro Basket Filters - 6 pcs/pack

[COMPATIBILITY] This fuel injector rebuild installation kits combination is a universal kit, compatible with the most commonly used injectors 0280150943 0280150955 0280150962..
[PACKAGE INCLUDES] This fuel injector repair kits include 6 micro filters 101, 12 injector O-ring 203, 6 injector retaining pintle caps 308, 6 injector spacers and 6 injector seal..
[INFORMATION] Micro Filters CF101-( 6X3X12mm), Injectors O ring 203 -(7.5X3.5mm), Injector retaining pintle Cap 308 - 12X8X6.5mm, Injector spacers seal 307 - (12.6*8.4*2mm), Injector seal 302 - (13X11X1.3mm).
[QUALITY CONTROL] This fuel injector repair installation kits set is 100% testing during the manufacturing process. o rings are made by FKM VITON material, it resistants high temperature which more than 200 degrees. All Items tested for reliability, durability..
[SATISFACTION] HiSport ensures brand new and high-quality products. In terms of any problem with this product, please contact us, our friendly assistants will always be available to help you within 24 hours..

Check Stock

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

Function: Fuel pressure regulator filter used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions. This bypass regulator passes excess fuel back into the tank so the pump can run freely..
Feature: The fuel filter regulator with 6AN adpater fittings for LS Swap delivers 58 PSI (4 BAR) to your fuel rail and returns unused gas to the tank, and build-in a 10 micron fuel filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life..
Compatible with: The fuel filter pressure regulator compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please you check the part is your need before purchase..
Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartm....

Check Stock

5007420 Outboard VRO Fuel Pump Compatible with Johnson Evinrude Oil Injection Conversion Fuel Pump 90-250HP V4 V6,Replaces 4-7359 1399-07359 5007422

Compatible with Johnson Evinrude OE Part #: 5007420, 5007422, 175109, 436203, 438094, 435560, 438400, 435953, 435556, 435558, 435784, 0175109, 5004558 ..
Fit For: Non-Oiling Fuel Pump for 90-250 HP V4/V6 Crossflow and Looper, Not for use on three cylinder motors. (Will NOT Fit 60 Degree Application)..
This a Conversion Fuel Pump Kit. It is applications to replace the original VRO fuel pump and mix your own fuel and oil in the fuel tank instead.
Warranty:For any reason, if you are not satisfied with your purchase, please contact us directly. We offer a six-month warranty, 100% satisfaction guarantee..

Check Stock

NEW HOLLEY SNIPER EFI SELF-TUNING KIT,800 CFM,BLACK,4BBL,FUEL INJECTION CONVERSION

Brand New Holley Sniper EFI Self-Tuning Kit – Black Ceramic Finish, 4 Barrel Fuel Injection Conversion – Self Tuning Kit plus Handheld EFI Monitor. (Part #550-511).
Holley just brought EFI within range! Introducing Sniper EFI! It’s economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride! Perfect for street rods, muscle cars, off road trucks or nearly any carbureted vehicle. Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today!.
Specs: CFM: 800 | Coast Guard Approved: Yes | Finish: Black | Flange Style: Dual Bolt Pattern | Fuel Pressure: 58.5 PSI | Height: 3.28″ | Injector Size: 100 lb./hr @58.5 PSI.
Inlet/Outlet Size: 9/16-18 Female O-Ring (AN 6) | MAP Sensor: 2Bar | Max Horsepower Rating: 650 Naturally Aspirated | Model: 4150 EFI Conversion Throttle Body | Product Type: EFI | Transmission: 700R4/200R4.

Check Stock

NEW HOLLEY SNIPER EFI SELF-TUNING KIT,800 CFM,SHINY,4BBL,FUEL INJECTION CONVERSION

Brand New Holley Sniper EFI Self-Tuning Kit – Shiny Finish, 4 Barrel Fuel Injection Conversion – Self Tuning Kit plus Handheld EFI Monitor. (Part #550-510).
Holley just brought EFI within range! Introducing Sniper EFI! It’s economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride! Perfect for street rods, muscle cars, off road trucks or nearly any carbureted vehicle. Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today!.
Specs: CFM: 800 | Coast Guard Approved: Yes | Emission Code: 3 | Finish: Shiny | Flange Style: Dual Bolt Pattern | Fuel Pressure: 58.5 PSI | Height: 3.28″ | Injector Size: 100 lb./hr @58.5 PSI.
Inlet/Outlet Size: 9/16-18 Female O-Ring (AN 6) | MAP Sensor: 2Bar | Max Horsepower Rating: 650 Naturally Aspirated | Model: 4150 EFI Conversion Throttle Body | Product Type: EFI | Transmission: 700R4/200R4.

Check Stock

Electric Fuel Pump Assembly for Chevrolet Cobalt Pontiac G5 2009-2010 l4 2.2L (Without Partial Zero Emissions)

Function: Used to clean the fuel injector and intake system, and the fuel system can be taken out from the cleaning system..
Multi-function: The system is not only characteristic of high and low pressure cleaning function..
Wide Application: The injector clean kits include many different kinds of adapters, covering almost all for EU, for Asia, for USA cars and light trucks..
Accessories Thread Size: M8x1.25, M15x1.5, M14x1.5.
Oil Storage Bottle Size: 19x7.6cm/7.48"x2.99"(H*D). Please make sure your adapter size before ordering..
Package Include: 1x Fuel Injector Cleaner, 1x Adapter Kits, 1 x Instruction. The package does not include the cleaning fluid, and only for gasoline injectors, not for diesel injectors..

Check Stock