ReviewsFuel Flow Meter

G20 - GPI Fuel Transfer Pump 12 Volt - Automatic Nozzle, 20 GPM 12v Fuel Transfer Pump, 14' Hose, Adjustable Suction Pipe (162000-03)

QUICK-FIT MODULAR DESIGN: The G20 12v fuel transfer pump with automatic nozzle has a quick-fit modular design with simple four-bolt connection points. This allows you to attach a filter, meter or both easily and build a custom system to fit your needs! Certifications: cULus Class 1, Div 2. Default warranty is 2 years..
DURABLE ALUMINUM HOUSING: Manufactured from high-quality diecast aluminum, our 12v fuel pump with automatic nozzle is extremely dependable and lightweight, weighing just 19 lbs (8.6 kg) and will put minimal stress on your tank bung. The aluminum housing is rugged and corrosion-resistant to withstand years of work in any application..
ROTARY GEAR DESIGN: The rotary gear pump is engineered with fewer moving parts, which means less friction and wear on its components. Thus this rotary gear pump will have fewer needed repairs and longer life than a rotary vane pump. When you need reliable performance, GPI fuel transfer pump products are engineered to deliver..
EASY-TO-USE: The 12-VDC motor of our fuel transfer pumps is highly efficient as it delivers gasoline, diesel fuel, ethanol blends, and kerosene at flow rates up to 20GPM. Additionally, the innovative spin collar design of our fuel transfer pump 12 volt makes installation fast and easy!.

Check Stock

Horiba 9096001700 Plastic Body PH Electrode

Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..

Check Stock

Mikuni Super BN Series 38mm Carburetor BN38-34-8113

The Mikuni RS Series Carburetors were designed and built in response to the needs of the worlds top motorcycle road race and drag race teams..
They required carburetors which could satisfy the precise fuel metering demands and high flow volume required by highly modified race engines..
And yet, also provide the smooth, controllable throttle response that is needed by any rider pushing his motorcycle to its limits on the race track and under any high performance applications..
The carburetors need to meter fuel correctly under a wide range of atmospheric conditions and engine tuning modifications while being easily accessible for trackside tuning changes which need to be made quickly..
Designed for in-line four cylinder performance motorcycle applications, the Mikuni RS Series Radial Flat Slide Carburetors offer superior horsepower gains with their maximum flowing smoothbore induction tract and radial flat slide design..

Check Stock

Fuel Vavle Petcock Shut Off Tank Switch Fits for Yamaha TTR 90 125 225 230 250 Timberwolf Bear Tracker Big Bear 250 Grizzly Raptor Warrior Wolverine 350 Moto-4 Kawasaki KLF 300 Suzuki Quadsport 400

...iginal Standard】Products manufactured in strict compliance with OEM standards, rugged, durable and easy to install. 100% brand new and durable petcock made by Vavle Expert, guarantees high performance, excellent air tightness, better fuel flow rates and longer working life..
【Package Info】 1 x fuel valve, 1 x meter fuel line, 1 x fuel filter, 4 x Spring Clips. Shop with 4Tune Garage, you get free gifts including high quality pure rubber fuel line and fuel filter!.
【Guarantee】Hassle-Free Return and Money Back, Shop with Confidence. All parts are strictly tested and quality controlled prior to shipment. Even so, we provide life time warranty and full refund for any quality issue..

Check Stock

Mikuni Rs Series Carbs 40mm Rs40-D1-K

The Mikuni RS Series Carburetors were designed and built in response to the needs of the worlds top motorcycle road race and drag race teams..
They required carburetors which could satisfy the precise fuel metering demands and high flow volume required by highly modified race engines..
And yet, also provide the smooth, controllable throttle response that is needed by any rider pushing his motorcycle to its limits on the race track and under any high performance applications..
The carburetors need to meter fuel correctly under a wide range of atmospheric conditions and engine tuning modifications while being easily accessible for trackside tuning changes which need to be made quickly..
Designed for in-line four cylinder performance motorcycle applications, the Mikuni RS Series Radial Flat Slide Carburetors offer superior horsepower gains with their maximum flowing smoothbore induction tract and radial flat slide design..

Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..

Check Stock

Mikuni RS Series Carburetor (RS36-D3 K) - 36mm RS36-D3 K

The Mikuni RS Series Carburetors were designed and built in response to the needs of the worlds top motorcycle road race and drag race teams..
They required carburetors which could satisfy the precise fuel metering demands and high flow volume required by highly modified race engines..
And yet, also provide the smooth, controllable throttle response that is needed by any rider pushing his motorcycle to its limits on the race track and under any high performance applications..
The carburetors need to meter fuel correctly under a wide range of atmospheric conditions and engine tuning modifications while being easily accessible for trackside tuning changes which need to be made quickly..
Designed for in-line four cylinder performance motorcycle applications, the Mikuni RS Series Radial Flat Slide Carburetors offer superior horsepower gains with their maximum flowing smoothbore induction tract and radial flat slide design..

Check Stock

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
⑥ max temp of tested liquid: 158°F/70°C.
MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..

Check Stock

NOENOUGH External Fuel Pump 300LPH High Flow 12V 145psi Fuel Injection Pump Replacement 0580254044 Universal Fit for AN10 Inlet / AN6 Outlet

★【ELECTRIC FUEL PUMP KIT MATERIAL: 】External fuel pump is made of high-density copper and iron that is high hardness, not easy to wear, not easy to corrode, and has a long service life..
★【COMPATIBLE FUEL: 】Inline Fuel Pump Inlet AN10, Outlet AN 6, Pump Flow and Test Information: Flow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V. Flow rate:255 LPH(68 GPH) under 43 PSI(3.0 bar) &12V. Flow rate:300 LPH(80 GPH) under 43 PSI(3.0 bar) &13.5V. Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F.
★【EASY TO INSTALL: 】It is recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than the fuel tank, it is forbidden to flow to the pump and force the fuel to be scratched. If the pump is higher than your fuel tank, prohibit fuel flow to the pump and force fuel to enter the pump..
★【PACKAGE INCLUDE: 】1 x External Fuel Pump, 2 x Rubber Connection Cover, 2 x Terminal, 1 x Large Gasket, 1 x Small Gasket, 1 x Large Nut, 1 x Small Nut.
★【COMPATIBLE FUEL: 】Gasoline, pump gas, race gas, diesel, (Alcohol fuels or E85 can be used, but pump life will be diminished). This Inline High Pressure Fuel Pump is adopts the anodized surface process....

Check Stock

MR CARTOOL T110 Automotive EVAP Smoke Machine, 12V Car Fuel System Leak Tester Detector with Built-in Vacuum Pump & Pressure Gauge & Air Flow Meter for All Vehicles

...Air Mode & Smoke Mode】Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 10 seconds, dramatically reducing diagnostic time. Smoke output value: 6L/min..
【Flow Meter & Pressure Gauge】Equipped with pressure gauge and adjustable flow meter to help maintenance personnel to observe the current flow volume and pressure for better control the smoke effect. Built-in over-heat protection, if it exceeds working limit (Over 176℉), it will power off automatically..
【Complete Set】Comes with 4.92ft Smoke Hose, EVAP Special Connector, Standard Cone Adapter, Power Cord Clamp, Valve Core Wrench, Airbag Adaptor, Rubber Connector Part, 3.38oz Empty Bottle for test oil(Please notice: Package does not includes the baby oil), Hanging Hook, Various of Soft Rubber and Hard Rubber Hose Plugs..
【Worry-Free After-Sales】MR CARTOOL offers 24-month warranty and 7x24 hours friendly customer service to ensure your shopping experience. No need to pay extra for warranty service, saving you a lot of money! If you have any issues a....

Check Stock

13400-77EV0 Mass Air Flow Sensor MAF Fits Chevrolet Tracker 2001-2004 Suzuki Aerio2002-2003 Esteem 1999-2002 Grand Vitara 1999-2005 Sidekick 1996-1998 Vitara 2004

[CAUTIONS] Before purchasing this MAF sensor, Please check the plug & fitment notes & filter system & description for accurate information to confirm....
[Replace in Time]: Replacing the MAF sensor can improve fuel efficiency, assist the catalytic converter to better eliminate harmful gases in the....
[High Precision Data]: Please clean out the air box and replace the air filter before installating this MAF sensor, or the Code and Check Engine Light....
[OE Quality]: KAX mass air flow sensor meter is manufactured in accordance with OEM specifications, It is durable, resistant to oxidation and high....

Check Stock