ReviewsFuel Hose For Motorcycle

AloneGoer 1/4″ ID Fuel Line + 1/4″ In-Line Fuel Filters + 2/5″ ID Hose Clamps Clips Compatible with Kawasaki Kohler Small Engines ATV UTV Motorcycle Snowmoble

  • SIZE: 1/4″ ID = ID 6mm x OD 12mm Fuel Line.
  • APPLICATION: Transfer petroleum products fuel lines vapor emission lines and vacuum smog control..
  • ADVANTAGE: The Fuel Lines are oil resistant, cold-resistant and ethanol tolerance..
  • Replace fuel line of Kawasaki EZGO Polaris Snowmobile Lawn Mowers Tractors Bike Scooter ATV Golf Cart Motorcycle ect. Power Equipment.
  • Package include: 5 feet Fuel Line Tubing + 20x Clamps Clips + 6x fuel filter.
Check Stock

PartsFlow 30 Gallon Gas Caddy Portable Fuel Tank Large Gasoline container Diesel portable gas tank with pump Rolling and Solid Rubber Wheels for Boat, ATV, Motorcycle, UTV, Car 4 Wheel

  • portable gas tank with pump Can store gasoline, diesel, kerosene or biodiesel fuels.
  • The large fuel caddy allows you to store up to 30 gallons of fuel, Simply turn the hand pump forward or reverse for dispensing or siphoning fuel. The 8.2 foot hose with fill neck easily fits in any gas tank..
  • Hand Siphon Rotary Pump has been specially processed to have a better sealing effect and prevent gasoline or diesel from leaking.It adopts solid rubber wheels with special material,The Tire thickness is 2in and tire diameter is 9.5in. which can better load-bearing and wear-resisting. After our actual measurement, it can be suitable for many occasions..
  • Easy to use reversible rotary pump fills and siphons by simply reversing the cranking action. The easily accessible, wide diameter fill neck provides a larger opening for safer, faster refills with less spilling and less waste of expensive fuel..
  • This gasoline container is suitable for ATV, UTV, motorcycle, ship, motorcycle, etc.
Check Stock

Electric Fuel Pump 12v Universal - Low Pressure 12 Volt Inline Fuel Pump for Lawn Mower Carburetor Gas Diesel Engine 2.5-4 Psi

  • Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • Electric Fuel Pump 12v Universal, fits for lawn mower marine motorcycle carburetor, all 12 volt cars, trucks, boats & generators with gas diesel gasoline petrol engine.
  • Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, plunger-type fuel supply, suction stronger, more stable oil supply.
  • 12 Volt Fuel Pump, two-wire design, can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere.
  • 1-Year-Warranty, made of High Quality & Durable Material, manufactured in ISO 9000 / ISO 9001 / ISO 9002 Certified Facilities and 100% mechanically tested ensures optimal performance and enhanced durability.
Check Stock

Tnisesm 1/4\(6MM) Inch ID Fuel Line kits, 2 Meter / 6-Foot Fuel Line + 2Pcs 1/4 Inch X 5/16 Inch Gas Inline Fuel Filters with Magnet +10 Pcs 13/32''-15/32'' Mini Fuel Hose Clamps Adjustable

  • High precision spring Clamps band type clips for hose air hose, water pipe, motorcycle fuel line.
  • 6mm Inner Diameter Spring Clamps for 5mm Fuel Line Filter.
  • Fit Trailmaster 150 XRS XRX Tomberlin Manco Kandi 150cc Go Karts.
  • HIAORS considers more on safety and practicability, pursuing to let all users enjoy the reliable products.
Check Stock

DASBET 9pcs Wire Long Reach Hose Clamp Pliers Set Fuel Oil Water Hose Auto Tools

  • ...des long-reach cabled hose clamp pliers, Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines..
  • Comfortable Grip: Molded, rubberized handles for less user fatigue and more productivity.
  • Pliers feature a ratchet locking mechanism that holds clamp in an open position which saves your fingers from accidents and injuries.
  • Durable: Corrosion-resistant nickel chromium steel.
  • Long-reach hose clamp pliers with 24-inch (61cm) flexible wire cable shaft allows access to awkward angles.
  • Approximate 1.2 to 1.75-inch (3 to 4.4cm) jaw openings swivel to access hose clamps in any position (approximate 8-inch / 20.3cm overall length).
  • Package includes: 1 X Hose Clamp Plier, 1 X Swivel Jaw Spring Wire Clip Plier, 1 X Swivel Jaw Band Cliper Plier, 1 X Angled Flat Band Hose Clamp Plier, 1 X Hose Remover Plier, 1 X Click-R Collar Plier, 1 X Flat Band Hose Clamp Plier, 1 X Screwdriver, 1 X Hose Remover..
  • Portable: The hose clamp tool is housed in a hand-held blow molded plastic case with handle for easy carrying. The pliers at different a....
Check Stock

NEW DAFU 1/4 Inch 6mm ID NBR Nylon Braided Fuel Line Set,5 Ft＋6 Pcs 2/5 Inch ID Hose Clamps,For Motorcycle Kawasaki Kohler Briggs Stratton Small Engines,Boat Marine Outboard Gas Diesel Petrol

  • ...ce life can be up to 9 years,3 times more than the other ordinary fuel lines,So the fuel line will not leak under any circumstances,And keep good working condition,Don't worry about your vehicle,No matter what questions you have, We will always support you.
  • For use in motorcycle mowers tractors snow blowers dirt bikes and all small engines,Use hose and clamps, transfer of petroleum products fuel lines for small engines.
Check Stock

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
  • Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum openin....
Check Stock

Universal Gas Inline Fuel Filters with Magnet for ATV Motorcycle 3/16″ 5mm-6mm 10 Pack (Yellow)

  • ✪In-line fuel filter fits 1/4″ or 5mm-6mm hose.,60 microns filter element.,Good to replace it at regular intervals,Universal fits for all motorcycles of this size,Easy to use and install..
  • ✪Material: Plastic,Color: Yellow,Red,Green,Blue,Measures 28mm,diameter and 52mm long.,60 Microns filter element.,Easy to use and install.,Good to replace it at regular intervals,Universal fits for all motorcycles of this size..
  • ✪ Specification:,ize: L x W 52mm x 28mm / 2.05″ x1.10″,Quantity:10pcs/set,Package Including:10pcs x Motorcycle Gas Fuel Filter.
Check Stock

Fuel Transfer Hose 3/4 Inch Fuel Hose 20 Feet,Farm Fuel Transfer Hose with Fittings,for transferring Diesel, Kerosene & Gasoline - Fuel Tank Hose for Fuel Transfer Pumps by BOOTOP PIN

  • 3/4 Inch NPT x 20 Feet Anti-Static Replacement Fuel Hose for Fuel Transfer Pumps For Dispensing Diesel, Kerosene & Gasoline.3/4 Fuel Transfer Hose With End connections..
  • Fuel transfer pump hose Designed for use with all electric pumps..
  • This Transfer tank hose include a 3/4 Inch NPT End connection and a 1 inch NPT threaded fitting at the other end..
  • 3/4 Fuel hose, 1 diesel fuel hose, gasoline pump hose, gas tank hose,Suitable for all Fuel Transfer Pumps for FPM-12, FPM-24, FPM-115 & FPM-220 models..
  • Feel free to contact us if you have any problems. If you are not satisfied with our products,we accept all of the return,replacement or refund requests..
Check Stock

TKKEUEP Gasoline Fuel Filler Neck Hose with 4 Hose Clamps,1 1/2 inches Inside Diameter Fuel Filler Hose, Reinforced Gas tank filler hose

  • Reinforced Fuel Filler Hose: This is good quality reinforced hose with the nylon cording inside for added strength.
  • Proper Fuel Filler Hose:Temperature Range: -40 Deg. F to +212 Deg. F (-40 Deg. C to +100 Deg. C).
  • Up to maximum concentrations allowed by the EPA.
  • Plenty Long Enough：Provided the length required for the extension from the tank to the filler cap；15 7/8" Long x 1 1/2" Inside diameter fuel filler neck hose（measure your old item to assist with the new one）.
  • Easy to Install:You can easy cut this gas line fuel filler neck hose to fit your purpose(Very flexible and easy to cut with box knife).
  • Applicable :Suitable for use with fuel line, fuel hose, fuel filler neck vent hose.
Check Stock

8AN Fuel Line Kit 16FT with Fittings Nylon Braided 1/2' 16 ft CPE Fuel Oil Hose - Not for PTFE E85

  • Application: Universal fuel line hose, Such as fuel, lube, alcohol, ethanol, coolant, and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes..
  • Reliable Material: The fuel line hose based on high-quality stainless steel, aluminum alloy and nylon, it has excellent flexibility and wear resistance. The outer nylon braid has excellent flame resistance and is safe to use..
  • The fuel line hose Maximum Working Pressure of Braided Steel Fuel Hose (psi): 500 psi. Bursting pressure (psi): 2000psi. Operating temperature range: -40°F to 257°F (-40°C to 129°C). Before buying, make sure that the pressure and temperature range are suitable for your application..
  • Package Includes: 10pcs 8an rotating hose ends (4 straight, 2pcs 45 degrees, 2pcs 90 degrees, 2pcs180 degrees),2pcs 8an hose separator clamp,1pcs gloves,1/2 braided fuel pipes (length: 16 feet). Hose ID: 0.44 inch (11.13 mm). The outer diameter of the hose: 0.67 inches (17.02 mm)..
  • Perfect Replacement: Fuel line hose, reliable material can safely replace the original parts, covered with high-quality braided nylon, enhance flexibility and provide a cool racing appearance.
Check Stock