ReviewsFuel Injector Diagnostic Equipment

Fuel Injector Return Line Kit - Fittings + Hose for VW Audi TDI 2.0L Diesel

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

AUTOOL GDI Fuel Injector Cleaner & Tester 110V Ultrasonic Wave Fuel Injection Leakage Tester 6-Cylinder Automotive Fuel Injector Cleaning Machine

  • 【Why Need It】The performance of the injector plays a vital role in the power of each engine. Due to the fuel quality, the injector cannot work normally, causing serious carbon deposits in the cylinder.
  • accelerating the cylinder bore and piston ring, causing unstable idling, increased fuel consumption, weak acceleration, difficulty in starting, excessive emissions, and complete blockage of the injector. Cause damage to the engine, so the injector should be cleaned regularly..
  • 【GDI Design】 Adopts latest GDI design, it is not only can be used to clean and test standard injectors, but also to implement GDI injectors, AUTOOL CT400 GDI fuel injector cleaner and tester is the newest version of fuel injector cleaner series. Compatible with Mercedes-Benz, BMW, Audi, Porsche, Ford, and other direct injection engines..
  • 【12V, 70V, 120V】 Using the latest and unique GDI injector driver software, AUTOOL CT400 6-cylinder fuel injector cleaning machine can drive 12V, 70V, 120V high pressure injectors，Compared with other cleaning machines and testing machines, AUTOO CT400 is equipped with a cooling fan and thermal protection, with a power of 60w. Equipped with a cooling....
Check Stock

LAUNCH X431 PROS Mini Bidirectional Scan Tool (Same Functions as X431 V PRO) Full System Automotive Diagnostic OBD2 Scanner 30+ Service Key Programming ECU Coding TPMS ABS Bleeding 2 Years Free Update

  • READ, DIAGNOSE, SERVICE: Functions include viewing live data-stream, reading and clearing of diagnostic trouble codes, component activation, Oil Reset Service/Steering Angle Calibration/Electronic Parking Brake Reset/Battery Register/Battery Maintenance/ABS Bleeding/Electronic Throttle Position Reset/Learn/DPF Regeneration/TPMS Reset/Immobilizer Matching/Fuel Injector Coding. Diagnostic operations including Auto Scan, Manual Scan, General Diagnosis, Service, Data Logging.
  • EASY TO USE TOUCHSCREEN INTERFACE: Full color HD display with touchscreen menus for accessing all the X431 testing components. There are comprehensive sections for reading, clearing, saving and printing diagnostic information. Perform active tests, run remote diagnostic tests, review the integral maintenance reference center (including videos), and access regular electrical system repair functions such as resetting the service lights, system calibrations, and much more.
  • THE WORLD FAMOUS X-431, NEW EVEN BETTER: The Launch X-431 has established itself as the premier auto diagnostic tool. Now we have introduced the best model yet, the X431 PROSS Mini. All the functionality of the X431 PRO, but with two-years of software updates and a new mini-tablet style with wifi and Bluetooth function....
Check Stock

Engine Fuel Injector Removal Tool Puller for Land Rover Range Jaguar 5.0L V8

  • Injector Removal Tool Puller for Land Rover 5.0 3.0.
  • Easy Remove Fuel Injector: Usually, Injectors on vehicles are very tough to pull in general , but this tool could easy remove fuel injector, Improve efficiency, save a lot of time, it's possible to remove injectors from a Range Rover without it, is a must tool for remove fuel injector.
  • Application: This fuel injector remover tool compatible with Land Rover/Jaguar 3.0 5.0 petrol engine, fit for Jaguar X150, XK Series, X250(XF) and XJ models (V8 5.0lt petrol engines). fit for Land Rover Discovery 4, new Range Rover, Range Rover Sport (V8 5.0lt petrol engines), replace OEM 310-197.
  • Exceed OEM Design: Our fuel injector remove tool improved on the basis of OEM, our design more easy to use, give auto repair engineers a better experience.
  • Quality Guarante: This fuel injector remover tool made of high qualuty steel, high hardness and strong endurance to ensure that it is still intact after high-strength impact, and we offer lifetime warranty..
  • Tips: Before use, please tighten the nut at the end of the slider to prevent it from slipping off during use.Hold slight downward pressure on the locking clasp as u use the slide hammer to pop the injector free,that will get better results.
Check Stock

HiSport Fuel Injector Seal Kits Include O-rings, Pintle Caps, Seal Spacers and Filter Baskets Universal Repair Set Replaces 0280150962 [8 Set]

  • [COMPATIBILITY] This fuel injector rebuild installation kits combination is a universal kit, compatible with the most commonly used injectors 0280150943 0280150955 0280150962.Compatible with Ford V8 5.4L 4.6L Fuel Injector Service Repair Kit Seals Pintle Caps Filters..
  • [PACKAGE INCLUDES] This fuel injector repair kits include 8 micro filters 101, 16 injector O-ring 203, 8 injector retaining pintle caps 308, 8 injector spacers and 8 injector seal..
  • Micro Filters CF101-( 6X3X12mm), Injectors O ring 203 -(7.5X3.5mm), Injector retaining pintle Cap 308 - 12X8X6.5mm, Injector spacers seal 307 - (12.6*8.4*2mm), Injector seal 302 - (13X11X1.3mm).
  • [QUALITY CONTROL] This fuel injector repair installation kits set is 100% testing during the manufacturing process. o rings are made by FKM VITON material, it resistants high temperature which more than 200 degrees. All Items tested for reliability, durability..
  • [SATISFACTION] HiSport ensures brand new and high-quality products. In terms of any problem with this product, please contact us, our friendly assistants will always be available to help you within 24 hours..
Check Stock

Hemi: Scifi Alien Invasion Romance (Hell Squad Book 13)

  • XFI 2. 0 Plug and Play - FAST XFI Main and Injector Harnesses are designed to plug directly into the FAST XFI 2. 0 ECU. Each XFI 2. 0 system requires both a Main Harness and a separate Fuel Injector Harness to access basic XFI 2. 0 Fuel Injection functions..
  • OE Quality - Featuring quality wire, protective sleeving and brand-name connectors, FAST brand XFI harnesses bring OE quality into the performance aftermarket..
  • Modern HEMI - The XFI HEMI-specific fuel injector harness ensures a quick and easy XFI 2. 0 addition to your 5. 7/6. 1/6. 4L HEMI. Crafted to ensure quality connections and a tidy appearance, our HEMI injector harness is an easy, time-saving way to add XFI control to your next HEMI engine build or swap..
  • Tech Specs - The XFI Dodge 5. 7/6. 1/6. 4 fuel injector harness is constructed with USCAR/EV6 injector connectors, and the firing order is 1-8-4-3-6-5-7-2. Changing firing orders requires re-pinning injector harness..
Check Stock

2022 Autel Scanner Maxisys 908CV for Commercial Vehicles, Professional Heavy Duty Scanner with 25+23 Service Functions, J-2534 Programming, Full-system Diagnostics, Same as Maxisys Elite, MK908P

  • Designed for CV ➤ 2022 Autel MaxiSys MS908CV boasts the pro-level diagnostics for Commercial Vehicles (Expert, Buses & Trucks), to get all module access for ECU Coding, Active Test (Bi-directional Control), 23 Adaptation Services, 25 Service Functions, Read/Erase Codes and Live Data, etc., being compatible with multiple supported protocols: SAE J1939, SAEJ1708, Manufacture-defined protocol J1939, Manufacture-defined J1708, KWP, VPW, UDS-CAN, CDL..
  • ECU Coding ➤ This Heavy Duty diagnostic tool allows you to re-flash the commercial vehicles’ control modules, and write in adaptive data for certain components after making repairs or replacements, to fix the issues as: Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts, etc. (Note: Coding only changes preprogrammed options already existent in the software.).
  • 23 Adaption Functions ➤ This commercial vehicle scanner provides various 23 component adaptation services, to calibrate or reset certain components after repair or replacement as: DOC/DPF Instant Replacement Reset, Fuel Pressure Adaptation Accurate Reset, After Treatment Maintenance, Calibration of Rack Sensor, Calibration of Injector Trim, and others, with fast navigation for optimal efficiency..
Check Stock

New Injection Pump 6738-71-1520 4063844 Fit for Cummins 6BT5.9 Engine Zexel

  • Includes tools to remove fuel injector sleeves, clean the injector bore and fuel galley, and install injector sleeve cups.
  • With the head removed, the slide hammer adapter can be installed to pull the injector.
  • Brush set properly cleans the injector bore which is required for the fuel injector sleeve cup installer to properly seat the cup.
  • Applications include: 2006-2009 4. 5L Diesel, 2004-2010 6. 0L Diesel.
Check Stock

Design Engineering 010378 Fuel Rail and Injector Cover Kit for Jeep (1997-2004, 4.0L Engine)

  • Designed for 1997-2004 Jeep models with inline 6 motor.
  • Reduces fuel rail and injector heat sink, reduces the chance of vapor lock, and keeps fuel cool.
  • Easy to install kit includes one manifold heat shield, one fuel rail heat cover, size fuel injector covers, and 12 fuel injector O-rings.
  • The heat shield is a glass fiber-backed heat barrier with thick aluminum skin.
  • The fuel rail and injector covers are designed to reflect engine heat.
  • the hook and loop design makes for easy installation.
Check Stock

Fuel Injector Removal Puller Kit Injector Seal Install Tool Compatible with Volkswagen TDi 4 Cyl 8V 16V Diesel Replacement for Audi VW 1.2 1.4 1.6 1.8 2.0 2.7 3.0 3.2 3.6 V6 4.2 V8 FSI TSI TFSI Petrol

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock