ReviewsFuel Line Fitting

ARES 10068 – 2-Piece Fuel & Air Conditioning Line Disconnect Tool Set - Release Spring Couplings on Fuel & Air Conditioning Lines – Compatible with Ford and Compatible with Chrysler LH Vehicles

INCLUDES: This 2-Piece Fuel and Air Conditioning Line Disconnect Tool Set includes two disconnect tools for easy, damage-free fuel and A/C line separation. This set features one ¾”, 5/8”, ½”, and 3/8” fuel and A/C line disconnect tool ,and one 3/8” and 5/16” scissor fuel line disconnect tool for separation and service..
DESIGN: Each quick disconnect coupler fitting has a locking mechanism inside the outer housing that goes over the lip of the fuel filter. This tool gets under the locking mechanism and releases the inner lip. This disconnect is necessary for Fuel, Heater, and A/C line service on many late model vehicles..
APPLICATIONS: These tools provide a release locking mechanism on all applicable size ranges (3/4.

Industy's first all in one fuel tank combo package.
Applications with 2 prong barb engine fitting: 1998 and up Mercury, All J/E, most Yamaha O/B engines.
Includes: one Universal fuel line, one quick disconnct to fuel connector, three fuel line connectors (Johnson/Evinrude, Mercury, Yamaha), tank connector with sealant and hose clamp.

1Pc 6AN 25 feet of high-pressure fuel injection hose.
1Pc 6AN to 3/8" Male Straight Filter Fittings+1Pc 6AN to 5/16" Fuel Filter Return Line Fitting.
2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings+2Pcs -6AN to 1/4" NPT Fuel Pump Adapters+2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings.
6Pcs straight -6AN Female to 3/8" Push Lock hose fittings.

-6 AN to dual -6 AN Y fitting is made of aluminum alloy 6061-T6,and hard-anodized coating is compatible with alcohol, exotic fuel-additives, water and oil.It is suitable for fuel system components such as fuel hose line fitting, fuel pump, fuel filter, etc..
The thread size of the 3-way union Y block splitter is 9/16UNF.They are sealed by a 37 degree angle, which is easy to install and avoid leakage.Ideal for any liquid or gas application requiring a high flow separator..
Compared with the T fittings with 90 degrees, male flare thread Y connector split flow at 60 angles can presant less flow obstruction.
All three ends have a male AN fitting，the block can flow both ways..
EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..

6AN 45 degree hose end fitting is suitable for all oil/ fuel/ water/ fluid/ air line, fit all stainless braided and nylon braided hose, can't fit PTFE fuel line and rubber fuel line.
Max working pressure is 1000psi, working temperature range is -65℉ to 252℉ (-53℃ to 122℃).
Designed for smooth flow, easy assembly, completely reusable, just disassemble and put onto another hose.
No leakage under high pressure and temperature.
Black anodized for durability, great appearance, and anti-corrosion.

... to 350℉. It is compatible with nearly every substance or agent used. Oil fuel line length: 10 m/ 32.8 ft..
20 Pics Hose End Kit: Each nylon and stainless steel braided oil fuel line kit included 20pcs 8an hose ends (8pcs straight, 4pcs 45 degrees, 4pcs 90 degrees, 4pcs 180 degrees) and 32.8ft braided fuel line. Fitting professionally to manifest its best performance..
Suit for Various Uses: Fuel line widely used in the fuel system, transmission system, cooler system, and pump. It can be worked with racing fuel, pump gas, fuels with ethanol, alcohol-based fuels, motor oil & coolant, etc..

FIT:For 1/2 Inch Inner Diameter Fuel Line, Quick Connection..
FUNCTION:Corrosion resistant fuel line fuel pressure barbed push lock T-fitting adapter,tee off the fuel line for reliable fuel pressure readings....
ADVANTAGES:High temperature resistant plastic rings are installed at both ends of the mount for sealing..
Note:When install the fuel pressure sensor or gauge in the 1/8 NPT Port, please use the Thread Sealant Tape to prevent leaked..
SUPPORT:At PTNHZ, if you have any question about our product, please contact us right away, we can handle any problems..

Oil Filter Thread Adapter Straight Fitting fit all oil cooler fuel tank fuel pump fluid Line..
Flare Hose Union Oil Tank Fitting Fits commonly available filters such as:STP S3600 FRAM PH33600 Purolator PSL30001 NAPA 4003 WIX24003.
Fitting Size:Female 5/8-24 to Male 3/4-16 13/16-16 3/4 NPT.
Materia:these Automotive Threaded Adapter is made of aluminum 6061.
NPT threads creates a seal by a wedging action.It is a tapered threads and can give an effective seal for pipes using hydraulic fluids..

8AN Female to 10AN Male Flare Hose Union Expander.
Black anodized finish for great appearance and suitable for most fluids.
Made of high‑quality lightweight 6061-T6 aluminum material for strong strength.
Fuel Hose Line Fitting fully compatible with gasoline and alcohol based fuels.
Universal application for Oil cooler / Gas / Water / Fuel tank / Fuel pump/ Fluid Line/ Air Line.

Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications..
Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes..
Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
Safety Features For Your Protection: Fuel Hose: Size(ID): 6AN, Length: 20FT, Working Temperature: -100℉ to 500℉ (-73°C to + 260°C) , Pressure Tolerance: 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance..
Package Includes: 1 x 6AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..