ReviewsFuel Line Removal

Car Fuel Feed Pipe Plier Gasoline Fuel Line Hose Clip Clamp Removal Release Tool Fuel Line Plier

  • ... Quality Car Fuel Feed Pipe Plier.This fuel feed hose clamp is made of high quality 45 # steel, durable and sturdy. It is not easily damaged, has a qualified quality and a long service life..
  • 【UNIQUE DESIGN】: it is designed according to the principle of ergonomics, For removal and replacement of the connections on the in-line fuel filter, which is labor-saving and comfortable to use and can give you a superior user experience..
  • 【EASY TO USE】: High strength 45# steel construction, strong and durable, difficult to damage, use the special jaws to pull the connector backwards to remove the connector, which can offer a practical and efficient experience..
  • 【APPLICATION】: It has a high practicality, which is a practical tool Fordisassembling and replacing the connections on the in-line fuel filter..
  • 【Sales Service】 We Would Provide the Quality Assurance and the Money Back Guarantee to ensure that you can buy it without any concern, We are committed to create the best product service for each customer, If this product does not meet your expectations, please feel free to con....
Check Stock

6.88FT Hand Fuel Line Outboard Primer Bulb Assembly Kit for Motor Vehicle Marine Boat, 3/8' 10mm Fuel Line Hose

  • Package Includes: 1 x fuel line hose kit, Pls pay attention to whether the connectors are the same before purchasing. Customer Service: If you are disappointed with our fuel hose for any reason, 100% replacement or money back guarantee is within 365 days, please feel free to contact us..
  • Product Material: High-quality rubber balls and 3/8" fuel hose. Compatible with ethanol blended fuel, engineered low-permeability materials can prevent fuel evaporation, suitable for boats, RVs, tractors and caravans..
  • Warm Note: Some newer models do not have the facility of an external fuel tank, so these pipelines are not suitable. This is a rubber product, please do not store it in direct sunlight or other harsh environments. Does not work for Evinrude engine..
  • Easy to Use: The fuel hose has a snap-on connector for quick installation and removal of the fuel tank and outboard engine. It is often used as a hand pump on a ship to provide fuel for outboard engines..
Check Stock

WTMORE Boat Fuel Tank 3 Gallon 12L, Marine Outboard Motor Fuel Tank w/Connector, Compatible with Kayaks, Small/Large Boats, Inflatables and Canoes- Red

  • ...mpact resistance, won't rust, crack or chip, it can naturally rebound without permanent deformation after encountering an impact..
  • Fuel Up With Ease- Marine portable fuel tank 3 gallon (12 litre) includes 1 pcs fuel line and 1 pcs primer bulb, the fuel hose comes with snap-on connectors to allow quick attachment and removal of boat fuel tank and outboard engine, fuel up with ease. It's perfect for small to large boats, inflatables, canoes and even kayaks..
  • Scientific Design- I-shaped lifting handle design is more ergonomic. It's light weight compact, easy to carry, easy to stow, durable and strong. The outboard boat motor fuel tank cap has two function, Sealing and Venting. In addition there are separate air inlet and oil outlet, design for prevent oil from spilling..
  • With Filter- A filter is built into the air inlet of the portable marine fuel tank to ensure clean fuel. Marine outboard motor fuel tank features a fine mesh input spout so you can fill this portable marine fuel tank without worrying about gunk and grime getting in the gasoline..
  • With Fuel Gauge- Marine fuel tank provides a high contrast fuel gauge to accurately monitor the level of remaining fuel without removing the fuel cap, helps you to clearly understand the changes of the oil and repl....
Check Stock

CUIDYSDP Fuel Line Disconnect Removal Tool Set, 1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch Master Quick Disconnect Tool Kit for Automotive AC Fuel Line and Transmission Oil Cooler Line

  • 【Widely Use】The comprehensive disconnect tool set for separating automotive ac hose and fuel lines, work for most fuel lines, air conditioning lines , air and oil pipes , radiator and heater hoses , simple push-on & pull-off action.
  • 【Handy Design】Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
  • Release the fuel line locking mechanism by listening for the slight “click” so easily to use..
  • 【Durable Material and High Quality】Made of hard plastic, no rust and corrosion. Light weight, compact size, easy to grip and get the hard-to-reach lines. Each tool is marked with permenat lable(Size: mm and inch) for easy identification..
  • 【Compact Size】Compact size, easy to grip and get the hard-to-reach lines. Place the notch of the tool against the line, and open the clamp with one push. Then you can get the line into the tool and disconnect..
  • 【Different Sizes For Muti-uses】 The Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
Check Stock

Mardatt 7 Pcs Automobile Hose Remover Pliers and Hook Set Include Brake Line Pinch Pliers, Separator Pliers, Fastener Remover Hook, Pipe Repairing Tool for Auto Radiator Vacuum Hoses Trim O Ring

  • 【High-value Hose Removal Tool Set】 You will get 1 pcs hose removal pliers, 3 sizes hose clamp pliers(large, medium, small), 1 pcs fastener remover hook, 1 pcs V-type hose clamp removal hook & 1pc U-type hook, totally 7 pcs. In addition, quipped with a storage bag for convenient storage and carry. The complete tool kit for most practical size satisfy daily repair..
  • 【Hose Clamp Pliers 】 Made of durable nylon with excellent non-conductive and rust-proof.
  • Work great on close off flexible hoses without damage. Fully insulated to reduce risk of short circuit. Leaving your hands free to repair. A wide range of sizes to fit most applications. But NOT for use on rigid, reinforced, or high pressure lines..
  • 【Line Tube Hose Remover】High-grade materials ensure quality performance over the lifetime of the tool. Designed to facilitate quick and easy access into tight areas with flat and thin head. Remove Fuel, Vacuum or Heater Hoses from 5/32”to 1/2”(4mm to 14mm) diameter. Simple to use, push the vacuum hose or fuel line off the fitting or tube by sliver jaw..
  • 【Fastener Remover and Hook Set】The fastener remover is designed for removing automotive audio equipment, trim panels, door panels, window trim, emblems and metal clips without damaging upho....
Check Stock

bnionlkm Fuel Line Disconnect Removal Tool Set, 1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch Master Quick Disconnect Tool Kit for Automotive AC Fuel Line and Transmission Oil Cooler Line

  • Widely Use : The comprehensive disconnect tool set for separating automotive ac hose and fuel lines, work for most fuel lines, air conditioning lines , air and oil pipes , radiator and heater hoses , simple push-on & pull-off action.
  • Handy Design : Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
  • Release the fuel line locking mechanism by listening for the slight 'click' so easily to use..
  • Durable Material and High Quality : Made of hard plastic, no rust and corrosion. Light weight, compact size, easy to grip and get the hard-to-reach lines. Each tool is marked with label (Size: mm and inch) for easy identification..
  • Made of hard plastic, resists fuels and solvents, durable and lightweight. Compact size, easy to grip and get the hard-to-reach lines. Place the notch of the tool against the line, and open the clamp with one push. Then you can get the line into the tool and disconnect..
  • Different Sizes For Muti-uses : The Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
Check Stock

Universal Fuel Pump Removal Tool Adjustable Fuel Pump Lock Ring Tool Fuel Tank Lock Ring Tool Fuel Tank Repair Kit 5.31 to 7.17 Adjustable Lock Ring Spanner

  • Widely Fitment: This fuel pump removal tool Use for symmetrical holes type & 5 or 7 holes type fuel tank lid. (Check the type of the lock ring of your....
  • Adjutable Size: This fuel tank lock ring tool has a large adjustment range (5.83~7.83inch) which is suitable for different oil pump lock rings..
  • A MUST HAVE TOOL: This universal fuel pump removal tool will help tackle the job of replacing the fuel sender fast and effective without damaging the....
  • Intended Use: This fuel pump ring removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending....
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on....
Check Stock

X AUTOHAUX 4pcs AN10 Hex Car Hose Finisher Flexible Rubber Pipe Clamp with Screw Band Adapter Fitting for Oil Fuel Water Tube Purple

  • HIGH QUALITY: Our auto Hose Clamp Plier is made by heavy duty carbon steel with firm grip rubber handles for fuel & coolant pipe spring line clip..
  • CAPACITY: This flexible hose clamping tool kit is with a max opening of 1-3/4 inch, which can be used on most ring-type or flat-band hose clamps for easy removal and installation..
  • LOCKING FEATURE: Locking ratchet that holds the clamp open for easy/quick installation and removal. Tips swivel to allow access in confined areas and can be used at any angle. Finger tip "position lock" makes it easy to replace the lower radiator hose..
  • WIDE APPLICATION: The long reach of these plyers allows you to work in confined and tight spaces. Our automobile hose cable clamp remover and release tools can get into those narrow spaces and get the job done with ease!.
  • EFFICIENT: Non-slip handle assure steady grip and decrease hand fatigue during use. The ratcheting action is smooth and releases when you want it to. Lock it in place and it just stays allowing you to move the hose clamp wherever you want. It is great for a backyard mechanic..
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1,6AN PTFE straight hose end*6,6AN PTFE 45 Degree hose end*2,6AN to 3/8" hose adapter fitting*2, AN6 to 3/8"quick disconnect male*1,6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

Inline Fuel Filter - APE RACING Universal Small 90 Degree Fuel Filters (Pack of 2) for 1/4 Fuel Line Gas Engine Motorcycle Bike Scooter ATV Quads

  • Perfect and easy replacement fit for 1/4" fuel lines. ⚠️Please note that the FLOW direction as the picture shows..
  • Manufacturing with APE Racing HIGH FLOW technology for better performance..
  • Wide range of application for small gas engine, like motorcycles, ATV, dirt bikes, small tractors, lawn mowers, snowmobiles, garden equipment, Go Karts, generators..
  • Durable and Reliable see through fuel filter. Constructed with clear nylon (Gasoline Resistance) housing and sintered bronze element..
  • The 90 degree offset in the inlet to outlet ports allowed the removal of a 90 degree bend in the fuel line..
Check Stock

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
  • PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
  • Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
Check Stock